ApplianceChat.com

ApplianceChat.com

Image by zinkevych on Freepik

Frigidaire Dishwashers Problems: 7 Common Issues (Must Read)

Frigidaire dishwashers are high-quality and long-lasting, as are all Frigidaire appliances.

Please enable JavaScript

  • 1 Frigidaire Dishwashers Problems: 7 Common Issues (Must Read)
  • 2 Frigidaire Dishwashers Any Good?
  • 3 How Long Do Frigidaire Dishwashers Last?
  • 4 Final Thoughts
  • 5 Related Articles

Based on our research here are the 7 most common problems with Frigidaire dishwashers

This is not to say that if you purchase a Frigidaire Dishwasher you will experience these issues.

These are the most frequently encountered issues.

Other washing machine brands’ problems are not too dissimilar.

Frigidaire Dishwasher Not Cleaning Properly

If your Frigidaire dishwasher isn’t cleaning your dishes, the spray arm could be clogged, the soap dispenser could be broken, you’re using low-quality detergent, or the inlet valve could be defective or damaged.

Before you call your local technician, go through the steps outlined below.

Possible Solution(s):

  • Check the spray arm to ensure it has not been obstructed by a plate or utensil. Gently spin it around to see if it’s free of any impediments.
  • Check that the small holes that spray water are not clogged with grease and grime. If so, take it out and gently clean it with detergent.

Low-Grade Detergent

  • Are you using the cheapest detergent tablets from the supermarket?
  • Spotty dishes can be caused by using low-quality or ineffective detergent. Too much detergent can also cause issues.
  • Use the proper type of detergent and the appropriate amount. A final rinse agent should also help with results.
  • Consider installing a water softener if you have hard water to reduce mineral deposit damage. Finally, make certain that the dishwasher is properly loaded.
  • Check to see if the detergent is being released by the soap dispenser.
  • Sometimes the dispenser gets stuck releasing the detergent at the correct cycle time, which is usually caused by grease and grime.
  • If this is the case, clean the soap dispenser gently with warm water to remove the grease and grime.

Dirty Filter

  • A clogged filter is a common cause of your dishwasher failing to drain making your dishes dirty.
  •  If your filter is dirty and the water is not draining, remove it from the machine (as directed by the owner’s manual) and thoroughly rinse it under hot water.
  • If there is any stuck-on gunk, soak it in hot, soapy water for a few minutes before gently cleaning it with a soft brush and rinsing.

Inlet Valve

  • Water enters the dishwasher through the inlet valve.
  • The valve is responsible for the water to enter the dishwasher, and if it malfunctions, the dishes won’t get enough water to get clean.
  • A faulty inlet valve is most likely to blame if you’ve recently noticed a hammering sound coming from the unit while it’s running.
  • Parts and replacement information can be found in your owner’s manual. Another reason can be a broken water pump belt worn out by continuous usage.

If you are unsure about any of these tasks or do not want to risk voiding your appliance’s warranty, contact a qualified technician to repair your dishwasher.

Connect with an Appliance Repair Technician Click here to use the chatbox to speak with one of our skilled Technicians. No in-home service calls. No appointments.

Frigidaire dishwasher not draining.

Is your dishwasher completely empty, or is there always an inch of water in the bottom?

Frigidaire dishwasher not draining is likely to be caused by a clogged-up filter, blocked hose, or faulty pump.

Before you call a repair service, try these three simple fixes if your dishwasher won’t drain.

Dirty Filters

  • If filters are not cleaned regularly, they can become clogged. Locate and uninstall your filters.
  • These are located at the bottom of the dishwasher, directly beneath the lower spray arm.
  • To begin, twist the cylindrical filter to remove it from the dishwasher.
  • Remove any gunk from the filters by gently cleaning them.

Blocked Drain Hose

  • If cleaning your filters hasn’t resolved the issue, a clogged drain hose is the next possible cause of your dishwasher not draining.
  • The drain hose is an essential component of any dishwasher because it transports dirty water away from the unit. It is usually connected to the same drain as the kitchen sink.
  • The drain hose could be clogged with grime and food debris or kinked, which is unlikely.
  • To clean it, remove the drain hose from the dishwasher and the sink drain.
  • The problem could also be coming from your kitchen sink. You can easily unclog a sink drain if you have a plunger or a drain snake
  • Our drain service is available if you require additional assistance.

Blocked or Faulty Drain Pump

  • A drain pump, like dishwasher filters, can become clogged by leftover food particles and grease buildup.
  • This will keep the water from draining after a washing cycle.
  • Any debris that has made its way into the pump is usually found near the impeller (a rotor that increases the pressure and flow of fluid).
  • Foreign objects, such as broken glass, can easily enter the drain pump and prevent it from functioning.
  • If there is a problem, you should be able to hear the pump struggling.
  • Checking the drain pump generally requires access to the dishwasher’s bottom. This means disconnecting the inlet hose and removing the base plate.
  • To ensure that the pump is working properly, take a resistance reading with a multimeter.

Still having issues, check out this detailed troubleshooting guide on Frigidaire dishwasher not draining

  • Frigidaire Dishwasher Not Draining (Simple Fixes)

Frigidaire Dishwasher Leaking

Frigidaire dishwasher leaking from the bottom is usually caused by using the incorrect type and quantity of detergent, a clogged filter, overloading the machine, leaking detergent draws, or leaking hoses.

Damaged Door Seal

  • One of the most common causes of dishwasher leaks is a damaged seal along the edge of the appliance’s door.
  • When new and supple, its rubber material works well to keep water inside the machine—but after years of use, it can dry out, become brittle, and crack.
  • Dried foods can also accumulate along the gasket edge, preventing the door from closing securely against the frame.
  • Replace the door seal and clean it around the door and door seal.  Replace the door if damaged or faulty.

Incorrectly Stacked Dishwasher

  • Overcrowded or incorrectly loaded appliances, utensils, and dishes may obstruct the arm’s rotation or cause it to become dislodged, even damaged, after years of use, resulting in leaks.
  • The solution is to stack the dishwasher correctly and check the spray arm for blockages.

Blocked, Loose, or Damaged Connecting Hose

  • The drain hose transports water from the dishwasher to the drain pump, and drain line, and eventually out your sink drain.
  • Because connections can become loose or the hose itself can crack or tear, the dishwasher may leak water onto the floor before it exits through the end of the line.
  • Check the hoses for any blockages and make sure there are no holes or cracks. If the hose is damaged, have it replaced.
  • Make sure you place the hose back in its place as per the manual. Incorrect placement will result in dishwasher malfunction.
  • Run the dishwasher through a cycle and check for any leaks.

If you’ve tried everything above and your dishwasher is still leaking, it’s time to call a technician.

Check out this article for more information on diagnosing and repairing a leaking dishwasher:

  • 7 Common Reasons Dishwasher is Leaking (with fixes)

Frigidaire Dishwasher Buttons Not Working

If the buttons on your Frigidaire dishwasher are not working, the display may be defective or power supply issue.

If some of the buttons are working and others aren’t the keypad may also be the culprit of your troubles.

Additionally, there is also a chance the entire control board has suffered internal damage and needs replacement.

  • First, ensure that your washing machine is receiving an uninterrupted power supply by ensuring that the power cable is properly plugged in and the socket works.
  • Check that child lock is not enabled and there is no food impeding the buttons.
  • Replace the faulty display, touchpad, or keypad.

Frigidaire Dishwasher Lights Flashing or Blinking

If the lights on your Frigidaire dishwasher are flashing or blinking rapidly, it is an indication that the heating element is not working as intended.

The heating element is responsible for warming up the water to an optimum temperature.

Still, if the water doesn’t reach the desired temperature in a given time, the light starts flashing.

Another reason can be a technical fault with the control panel that causes the circuitry to go haywire.

  • Replace the heating element
  • Replace the heating element assembly
  • Get the control panel checked by a technician

Frigidaire Dishwasher Won’t Start

If your Frigidaire dishwasher does not start when you turn it on, there could be a problem with the power supply or the door latch.

The switch indicates to the control board whether the door is fully closed or not so the dishwasher can start.

If the switch is faulty, the control board will not receive the signal, and the machine will not turn on.

Another possible issue can be a blown thermal fuse.

However, before you call your local technician, try the troubleshooting steps listed below.

Check Power Supply

  • Ensure the power cable is plugged in properly and the socket works. 
  • Check if the circuit breaker has been tripped due to a power surge and flip it back on.
  • Most dishwashers have a child lock feature that prevents children from opening the appliance or changing the cycle settings.
  • In many cases, the unit will not operate if the child lock is activated.
  • The lock is usually activated and deactivated by pressing and holding a button for three seconds, or something similar.
  • Check the manufacturer’s instructions for the child safety lock if your dishwasher won’t start or the door won’t open.
  • The door latch switch is the next thing to inspect. This is what tells the dishwasher that the door is securely closed and that it is safe to begin the water cycle.
  • The latch secures the door, and the latch switch detects when the door is closed.

There are several possibilities here.

  • Examine the door latch to see if there is any old soap or food gunk stuck in it.
  • The latch will not click shut if it is jammed or clogged with old gunk.
  • The switch will not activate, and the dishwasher will not start.
  • Your door latch or latch switch could also be damaged.
  • If the latch fails, the door will no longer be able to click and hold itself closed, preventing the dishwasher from starting and running safely.
  • You’ll need to replace the door latch as well as possibly the switch.

If you have troubleshot the items above and your dishwasher is still not working, might be faced with a faulty control board, drive motor, or Thermal Fuse.

It is best to call a technician, who will quickly determine the problem.

Frigidaire Dishwasher Stopping Mid Cycle

After finishing dinner, you turn on the dishwasher only to discover that it stops midway through the cycle, leaving the dishes still unclean and covered in soap build-up.

Then when you try to start the cycle again and get no response or find that the same mid-cycle premature end happens all over again,

The reason for your Frigidaire dishwasher stopping mid-cycle is likely caused by a faulty door switch, blown fuse, or faulty control board. 

If you are uncomfortable about resolving this problem or do not want to risk voiding your appliance’s warranty, contact a qualified technician to repair your dishwasher.

Frigidaire Dishwasher Making Noise

Strange noises coming from the dishwasher are not uncommon. They are usually nothing to be concerned about, and the noise problem is often easily resolved.

If your Frigidaire dishwasher is making too much noise, you may be dealing with a blocked spray arm, food, or broken items moving around in the dishwasher. 

Follow the steps below before calling a technician and handwashing your dishes.

  • A buzzing noise is usually nothing to be concerned about. When your dishwasher pushes water down the drain, you can hear it buzz. Check your pump impeller for blockage or damage if the sound is very loud.
  • If your dishwasher is making grinding noises , it is likely that a foreign object has become lodged inside the pump.
  • It could be hard food or something that was being cleaned and broken during the wash cycle.
  • To see if this is the case, remove the dishwasher’s lower rack, then the spray arms, and finally the filter unit for inspection.
  • Check that the dishwasher is properly loaded . If the spray arm is hitting the utensils (baby bottles, for example), the dishwasher has been incorrectly loaded.
  • To fix this, arrange the utensils so that the spray arms can fully rotate without being obstructed.

If the noise persists, it is best to contact a technician.

Frigidaire Dishwasher Not Heating Water 

Frigidaire dishwasher not heating water is likely to be caused by a faulty heating element, faulty control board, or broken temperature sensor. 

Unless you are very handy it’s probably best to contact a technician to come to take a look at your dishwasher.

Frigidaire Dishwashers Any Good?

Yes, Frigidaire dishwashers are good. Aimed at budget customers, the Frigidaire dishwasher will keep your glasses, plates, pots, and pans clean while also looking good.

Frigidaire is a well-known brand in the home appliance market, offering a wide range of products including refrigerators, ovens, and dishwashers.

When it comes to dishwashers, Frigidaire is a brand that many homeowners consider due to its reputation for quality and durability.

Let’s take a closer look.

Firstly, Frigidaire dishwashers offer a variety of features that make them stand out in the market. They come in a range of sizes, including compact models for smaller kitchens, and have multiple wash cycle options to cater to different needs.

Many of their models also have an Energy Star rating, meaning they are energy-efficient and can help reduce energy bills.

In terms of performance, Frigidaire dishwashers are known for their powerful cleaning capabilities. They use advanced cleaning technologies, including OrbitClean and BladeSpray, which ensure that dishes are cleaned thoroughly and without residue.

Many models also have a sanitizing option, which is perfect for households with children or those who want to ensure that their dishes are free from harmful bacteria.

Frigidaire dishwashers are also built to last. They are made from high-quality materials that can withstand regular use and last for many years.

They are also backed by a solid warranty, which provides peace of mind to homeowners who want to invest in a quality dishwasher.

Overall, Frigidaire dishwashers are an excellent choice for homeowners who are looking for a reliable and efficient dishwasher.

With a range of features and advanced cleaning technologies, they provide an exceptional cleaning performance while being energy-efficient and built to last.

So if you’re in the market for a new dishwasher, Frigidaire is definitely a brand worth considering.

How Long Do Frigidaire Dishwashers Last?

Frigidaire dishwashers should last between 8 and 10  years and may last longer if properly maintained and infrequently used.

However, if your Frigidaire dishwasher is at least ten years old, it is more cost-effective to replace it.

Repairing the 10-year-old dishwasher will most likely be more expensive.

Final Thoughts

So, there you have it: our complete troubleshooting guide for your Frigidaire dishwasher, so you’re always prepared in the event of a problem.

Related Articles

  • Frigidaire Dishwasher Arm Not Spinning (with Solutions)
  • Frigidaire Dishwasher Door Not Closing (Simple Answers)

Courtesy: Image by zinkevych on Freepik

The Kitchen Pro Tech

16 Most Common Frigidaire Dishwasher Error Codes Explained With Fixes

Frigidaire dishwasher stands out as an indispensable kitchen companion, ensuring sparkling clean dishes with minimal effort, but it sometimes throws different error codes from time to time that rob you of its optimal performance. 

Frigidaire dishwasher error code ER means its touch control panel or membrane switch might be shorting out due to a stuck or pressed key. To fix the ER error code on the Frigidaire dishwasher, make sure the keys are not stuck on its central panel. If this fails, check the wiring between the keypad and the main control board and replace it if necessary. 

To help you with troubleshooting, we’ll list down some Frigidaire dishwasher error codes and provide easy-to-follow instructions to resolve them. 

Table of Contents

What are the most common frigidaire dishwasher error codes, what does the frigidaire dishwasher pf error mean, how do i fix the frigidaire dishwasher pf error, what does the frigidaire dishwasher ho error mean, what are the ce, ra, hs, and tu codes on a frigidaire dishwasher, how do i fix the ce, ra, hs, and tu codes on a frigidaire dishwasher, what does the ho error mean on my frigidaire dishwasher, how do i fix the ho error on my frigidaire dishwasher, what is the dp and sd code on a frigidaire dishwasher, how do i fix the dp and sd errors on my frigidaire dishwasher, what is the er code on a frigidaire dishwasher, how do i troubleshoot the er error on my frigidaire dishwasher, what is the meaning of uo and uf errors on frigidaire dishwasher, how do i get rid of the uo or uf error on my frigidaire dishwasher, what does frigidaire dishwasher cl error mean, how to fix cl error on frigidaire dishwasher, what is fl error code on the frigidaire dishwasher, how do i get rid of the fl error on my frigidaire dishwasher, what do “i” errors mean on the frigidaire dishwasher, how do i get rid of “i” errors on my frigidaire dishwasher, how do i fix my frigidaire dishwasher.

What do Frigidaire Dishwasher error codes mean

A few common error codes you may see on your Frigidaire dishwasher are PF for power supply failure, HO when the heating element is faulty, and the LO code if the appliance has low rinse aid. 

Below, we’ve listed some of the common Frigidaire dishwasher error codes, along with their meaning and fixes, you may experience while using it in your kitchen: 

PF is the most common Frigidaire dishwasher error code that indicates power failure and is usually caused by:

  • 10 % drop in voltage or unusual power outages. 
  • Loose power connection. 
  • Faulty door system. 
  • Bad water heating system (Also a probable cause for error i60) or element. 
  • Leaking water pump or faulty drain pumps. 
  • Damaged control board.

To fix the Frigidaire dishwasher PF error code :  

  • For general power outage issues, press the “Start/Cancel” button on the dishwasher and hold it for 3 seconds to soft reset it. 

How do I fix my Frigidaire dishwasher

  • Plug the dishwasher directly into the wall outlet instead of an extension board to ensure sufficient power supply. 
  • Replace or change the circuit breaker if the power drop is caused by overload. 
  • Check the connection between your dishwasher and wall outlet for a firm connection.
  • Inspect the door switch using a multimeter and replace it if damaged. 
  • Check and replace the water heating system, drain pump connector, or control panel if even one of them is not getting power. 

Frigidaire dishwasher uses hot water to clean the dishes thoroughly. However, if it detects the water temperature is too low or the heater cannot heat it, the dishwasher throws the HO or Hd error code when washing the dishes.

To Fix the HO error code on your Frigidaire dishwasher, simply run hot water in the sink to remove the cold water before starting it. This will ensure the appliance gets the water at the right temperature while washing and cleaning the dishes. 

You can also check the thermistor and heating element and replace them in case of any defect or damage to fix the HO error code. 

The Frigidaire dishwasher shows the CE error code when the control board is faulty due to a wiring problem, which leads to a communication or configuration issue. 

The RA error code on your Frigidaire dishwasher points to the problem with the rinse aid reed switch due to a malfunctioning detergent dispenser, faulty main PCB, or a wiring issue between the PCB and the main detergent dispenser.

Another common error on Frigidaire dishwashers is the TU code, which typically indicates a problem with the turbidity sensor that measures the level of dirt in the water and assists in determining the appropriate wash cycle for your dishes.

When your Frigidaire dishwasher flashes the HS error code, it signals a problem related to the Hall Sensor. This error means the motor and the main control board wiring are either faulty or loose.

To fix the CE, RA, HS, and TU error codes on your Frigidaire dishwasher, you need to check the wiring connection between:

  • The control panel and keypad.
  • PCB and main detergent dispenser.
  • Motor and main control board. 
  • Turbidity sensor and main control board.

If these wirings are defective, consult a technician to diagnose and replace them. 

If this does not fix the CE error, press and hold the Cancel button to turn off the power supply to the dishwasher for 5 minutes. In case of an RA, HS, or TU error, you may need to replace the detergent dispenser, motor, or main control board, respectively. 

The LO error message shows up on your Frigidaire dishwasher if it receives inadequate voltage (below 110 volts) due to a failed control board or it is running low on rinse aid for cleaning the dishes. 

To fix the LO error code on your Frigidaire dishwasher, check the rinse aid in your Frigidaire dishwasher and refill the product with the appropriate amount. Also, ensure the dispenser cap is closed tightly.

If the error persists, use a multimeter to get the reading of the control board. If it’s below 110 volts, replace the whole part. 

The Dp error on your Frigidaire dishwasher shows up in the relay test and means there is something wrong with the drain pump. 

Like the Dp error, the SD code appears in the relay test mode on your Frigidaire dishwasher and shows that the “detergent dispenser” is activated.

To fix the Dp error on your Frigidaire dishwasher, test the drain pump and remove any obstructions or clogs. 

If the problem persists, soft reset the dishwasher. To do this, press the “Cancel” button for 3 seconds or try disconnecting the appliance from the wall outlet for 10 minutes. 

TIP: Soft resetting the dishwasher can also help you fix the SD, RT, and RE errors.

If your Frigidaire dishwasher throws the ER error, its touch control panel or membrane switch might be shorting out due to a stuck or pressed key.

To fix the ER error on your Frigidaire dishwasher, examine the keys on its control panel to see if they are stuck. If not, unplug the dishwasher from the power source for 10 minutes. While at it, inspect the wiring between the keypad and the main control board and replace it if necessary.

The UO error on your Frigidaire dishwasher means “Vent Open,” which happens if the main control is not receiving signals from the vent assembly due to the failure of the ventilation subunit or mainboard.  

UO Error (Vent Open Issue)

The UF error indicates that the vent motor on your Frigidaire dishwasher is not running at the right speed during the drying cycle. It is also possible that the vent is clogged.

The fix to resolve the UO nd UF error on your Frigidaire dishwasher is to soft reset it with the above method or inspect the dishwasher fan, valve, sensor, and the wiring connection between the vent assembly and main control board.

If any of these components are defective or damaged, replacing them will most likely resolve the problem. Also, inspect and change the main control board to troubleshoot the error.

CL is a simple error code, which means your Frigidaire dishwasher’s door is not latched or its switch is malfunctioning. This prevents your dishwasher from turning on till you close the door correctly.  

Since the door switch plays an important role in displaying the error CL on your Frigidaire dishwasher, open it and check for any object preventing it from closing correctly. 

Checking Frigidaire dishwasher door switch

Do examine the wiring connection between the door switch and the main control board for any damage and repair or replace it.

FL error code on Frigidaire dishwasher means the “Water valve” that controls water flow into the appliance is activated during the relay test.

To fix the FL error code on your Frigidaire dishwasher, examine its supply line and pressure to ensure the water flow is uninterrupted and at the required levels. This solution will also help you troubleshoot the i10 error on the dishwasher.

Also, inspect the dishwasher and make sure the water is not leaking after washing the dishes.

Due to a blocked drainage system or clogged filters, you’ll usually see iF0, i20, or i40 errors on a Frigidaire dishwasher. The i10 error means the appliance has insufficient water due to an issue with the supply system. 

On the other hand, if water leaks into your dishwasher’s bottom pan, its cycle will be interrupted, and the appliance will display the i30 or i50 error code to point to the drain problem . 

Check the drainage system on your Frigidaire dishwasher if you are experiencing the i20, i40, or iF0 error codes, and ensure the filters are clean and the drain hose is not clogged or blocked due to debris or other obstructions.

To get rid of the i30 and i50 codes, examine the sewage system and clean or unfold its hose for proper dirty water flow. 

To fix Frigidaire dishwasher error codes, first troubleshoot the power supply issues and then run hot water in the sink before the wash cycle to ensure the right temperature. Also, add more rinse aid in the dispenser and close the cap correctly. If this doesn’t help, check the control board, drain pump, and heating system and replace them if needed. 

In this detailed guide, we’ve discussed 16 Frigidaire dishwasher error codes and explained different methods to resolve them quickly.

The RE and RT errors indicate issues related to the triac test mode or relay test mode of your Frigidaire dishwasher, respectively. So conduct them again and see if this fixes the issue.

Remember to consult your Frigidaire dishwasher’s user manual for specific instructions, and always prioritize safety when troubleshooting or performing maintenance on your appliance.

How useful was this post?

Click on a star to rate it!

Average rating 5 / 5. Vote count: 2

No votes so far! Be the first to rate this post.

Stay Connected with us

Avatar of Tauqeer

I am a kitchen appliances expert with years of experience on my back, which motivated me to share insightful tips with people who face issues while cooking, defrosting, melting, or reheating their food. I’m also a food enthusiast and spend my free time traveling the country, trying out the best recipes, reviewing cookware products, and sharing my experiences with others.

Related Posts

LG Microwave Not Heating: 7 Reasons & 10 Fixes

LG Microwave Not Heating: 7 Reasons & 10 Fixes

LG Craft Ice Not Working: How To Fix It?

LG Craft Ice Not Working: How To Fix It?

Ninja Blender Blinking Red: Here’s How to Fix

Ninja Blender Blinking Red: Here’s How to Fix

Affiliate disclosure.

Thekitchenprotech.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. We also participate in other affiliate programs which compensate us for referring traffic.

Privacy Policy Terms of Service Disclaimer Contact us

© 2023 The Kitchen Pro Tech

Frigidaire Dishwasher Repair Manual

  • Clothes Dryer
  • Washing Machine
  • Refrigerator
  • Stove & Oven
  • Dishwasher Repair
  • Table of Contents
  • CHAPTER 1 System Basics Brand ID
  • CHAPTER 2 Troubleshooting Tools & Safety Tips & Tricks
  • CHAPTER 3 Wash Quality Problems
  • CHAPTER 4 Water Leaks
  • CHAPTER 5 Pump and Motor Problems
  • CHAPTER 6 Electrical Problems

Looking for a Frigidaire Dishwasher Repair Manual?

HAS YOUR FRIGIDAIRE DISHWASHER QUIT?

ARE YOUR DISHES PILING UP?

IS YOUR FRIGIDAIRE DISHWASHER LEAKING? IS IT NOISY?

IS IT LEAVING YOUR DISHES ALL SPOTTY?

Frigidaire Dishwasher Repair Manual

Frigidaire developed the first self-contained refrigerator in 1916.

Frigidaire Dishwasher Troubleshooting

Our Frigidaire dishwasher repair manual can help! The same things tend to fail in the same designs. Why not save yourself a lot of time, hassle and money, and just go there first? Why are some dishwashers so bloomin' sensitive to food left on the dishes, when it seems like others could double as a wood chipper? Why do some dishwashers get dishes so clean, when others leave spots as heavy as a new snowfall? Our dishwasher manual attempts to answer such profound philosophical questions, as well as more acute ones, like: "where in the heck is that water on the floor coming from?" Common complaints are covered, such as wash quality problems (spotting, filming, etching, etc.), leaking, water not filling, water level and not draining problems, pump rebuilding, motor, timer, heater and electrical problems, drying troubles and other Frigidaire dishwasher problems.

NOTE: The diagnosis and repair procedures in this manual do not necessarily apply to brand-new Frigidaire dishwashers, newly-installed dishwashers or recently relocated dishwashers. Although they may posess the problems described in this manual, Frigidaire dishwashers that have recently been installed or moved are subject to special considerations not taken into account in this manual for the sake of simplicity. Such special considerations include installation parameters, installation location, the possibility of manufacturing or construction defects, damage in transit and others.

Our Free Frigidaire Dishwasher Repair Manual was designed to assist the novice technician in the repair of home (domestic) dishwashers that have been operating successfully for an extended period of months or years and have only recently stopped operating properly, with no major change in installation parameters or location. Find which Frigidaire dishwasher parts in your machine need replacing and how to do it yourself.

Please share our .

  • Dishwashers
  • Clothes Dryers
  • Top-Loading Washing Machine
  • Refrigerator or Icemaker
  • Stove or Oven
  • Terms of Use
  • Privacy Policy
  • Whirlpool Dishwasher Repair
  • Kenmore Dishwasher Repair
  • GE Dishwasher Repair
  • Hotpoint Dishwasher Repair
  • Maytag Dishwasher Repair
  • Frigidaire Dishwasher Repair
  • KitchenAid Dishwasher Repair
  • Thermador Waste King Dishwasher Repair

Follow us on social media

Copyright © 2005 - EB Publishing Inc. All Rights Reserved.

MachineLounge

Frigidaire dishwasher troubleshooting codes [Meaning and Fixes]

Frigidaire dishwasher troubleshooting codes

As an Amazon affiliate, we earn a commision from qualifying purchases.

Frigidaire dishwasher troubleshooting codes: Of course, one of the ways your Frigidaire Dishwasher signals faults is by throwing an error code.

This guide will help you troubleshoot Frigidaire dishwasher error codes- suffice to say that each Frigidaire dishwasher error code points to a different issue(they’re not universal)

Frigidaire dishwasher troubleshooting codes – What individual Frigidaire dishwasher fault codes signal and how to fix (the issue causing the Frigidaire dishwasher code you are seeing)

Frigidaire dishwasher code 188, what it means:.

If Frigidaire dishwasher error code 188 is flashing, it could point to a damaged door latch(meaning unit door is not closing properly)  

How to resolve the code

Try to observe if there’s a loose connection on the latch mechanism(when not-latched) and see if you can fix it.

The other solution is to get a new Frigidaire dishwasher door latch-And get the old one out( Check price of a replacement door latch on Amazon ).

frigidaire dishwasher code 4

Good news: It’s not a complicated repair (no hard work required)

Frigidaire dishwasher UO code /  Frigidaire gallery dishwasher UO code

This simply means the vent is open (vent not closing)- and it could be brought about by myriad issues including a fan(vent assembly) that’s not working.

Typical behavior here is your dishwasher starts filling with water after you start a cycle.

Then, the vent assembly clicks a couple of times and then your dishwasher stops and throws the error code(on the LED).

Also, you may note water is not draining from your dishwasher and it is not getting items clean.

Frigidaire dishwasher UO code fix (Frigidaire dishwasher UO code reset)

If you’re getting the notorious Frigidaire dishwasher fault code UO, try to replace the fan assembly(it could be defective hence the UO code on Frigidaire dishwasher).

That could do the trick- and it’s a really easy install!

Check the current price of a replacement Frigidaire dishwasher vent assembly.

Quick Tip: Try the above fix if you’re struggling with the Frigidaire Dishwasher Error Code UF (ER/uF indicates the fan is not running)

Frigidaire dishwasher i 40 error code / Frigidaire dishwasher i20 error / Frigidaire dishwasher i30 fault code / Frigidaire dishwasher error code i30  / Frigidaire dishwasher error code 30

You have a bad pressure sensor(pressure sensor switch) so you might notice that the drain pump in your dishwasher keeps running(and running) and the appliance won’t move to the next washing step.

It is recommended you change out the faulty pressure sensor switch ( Check price at Amazon ).

frigidaire gallery dishwasher trouble codes

Keep in mind that this is the part you probably need to change out if the Frigidaire dishwasher i20 error code and Frigidaire dishwasher i30 fault code are giving you sleepless nights.

It oftentimes works like a charm(Once you get the new part in there) so try and see how it goes.

But it’s also worth trying to clean filters….  and then leave the appliance unused for several days.

Error code i30 could also mean there is a leakage and water has overflown into the bottom tray and therefore, the anti-flooding device has been automatically activated.

Now, many times the culprit is dirty filters so do not forget to give cleaning them a shot- it could save you a few bucks.

I should add that adding too much detergent could also make it overflow with suds, leading to the Frigidaire dishwasher error code 30 (pump will incessantly run)..

Here just grab a Shop Vac then vacuum off the water completely – unplug it from power completely before and also cut off water- reconnect after you’re done and check if the i30 still shows.

Frigidaire Dishwasher HO error or Frigidaire Dishwasher HD Code

Heat delay(water not hot enough)

Change the temperature sensor.

Check connections to the unit’s heating element (you may have to change it )

Frigidaire dishwasher error code i 4

Water overflow problem(perhaps due to a drainage/leakage issue)

The code can also be triggered by leveling fault- if the unit isn’t level

  • In addition, avoid putting excessive detergent.
  • Ensure machine is perfectly level(on level surface)
  • Change drain pump- it may not be draining.
  • Check the hose/unit for leaks, sometimes it will not be filling

Frigidaire dishwasher error code LO

There’s low liquid remaining in the appliance’s rinse aid dispenser

frigidaire gallery dishwasher uo code

Refill the rinse aid dispenser with recommended liquid rinse agent-The error will stop displaying after 5 seconds(after dispenser is refilled).

Frigidaire dishwasher error code PF

There’s a power failure.

You may also see this code when Frigidaire your dishwasher is installed(for the first time).

Note that the machine also tends to flash the “HI-TEMP WASH” + “AIR DRY”/ “NO HEAT DRY” LED’s at the same time with the Frigidaire dishwasher PF code.

Frigidaire dishwasher pf code fix

Touch/Press the “START/CANCEL” pad.

You can now select your desired washing options once more and restart the cycle.

Frigidaire dishwasher error code Cd

Door not closed.

Nothing to worry about here – it is just a reminder that you have not closed the door.

Do that and the cycle should start.

Frigidaire dishwasher troubleshooting codes continued

Frigidaire dishwasher error code i50.

The drain pump or motor has failed

Get a new drain pump/motor(test the old first, as per the instructions in the tech sheet)

Check price of new drain pump ( OEM Part )

Check price of new Frigidaire dishwasher motor

Frigidaire dishwasher error code i6 0

Heating element defective

Frigidaire dishwasher error ER code (Frigidaire dishwasher code ER)

The Membrane switch has malfunctioned(Main control is detecting a stuck key/key pressed for 1+ minute).

Check connections on the control panel.

And if you find that all the connections are correct, consider swapping the entire key pad(chances are a keyboard short circuit occurred). Check this OEM Control Board Switch/Assembly Replacement .

Lastly, if error code ER on Frigidaire dishwasher still exist, replace the main control .

Frigidaire dishwasher error ER code

Frigidaire dishwasher touchpad not working? Easy fix

Frigidaire dishwasher error code ce.

Configuration error

Reset it (see steps after the next paragraph)

You might also want to see if there’s a loose connection between main electronic control board and its keypad

Frigidaire dishwasher error code iC 0

Main Board defective

Frigidaire dishwasher error code iF0, Frigidaire dishwasher error code iFo or Frigidaire dishwasher error code iF1

There’s a badly clogged drain line/filter

  • Check your Frigidaire dishwasher filter and the sump – you want to see if there are any foam/suds/debris and clean them off thoroughly.
  • Also, check drain hose for clogging – and again clear it(take it off-at the disposal- then blow until you hear it is clear).

Frigidaire dishwasher error code 199

Not really an error- just showing 199 minutes remain to delay start.

How to perform Frigidaire dishwasher error codes reset

It is best to first attempt performing a machine reset when you see a code….

Well, sometimes the code is thrown due to a misconfiguration in the appliance’s software(program).

For that reason, resetting your unit back to defaults (default factory settings) could get rid of the system error behind the fault code.

So, how do you reset it?

You simply need to do a typical hard reset- you can just flip the breaker off and then back on.

By the way, you can wait for 30+ minutes before flipping it back on(waiting longer could help clear up the memory completely).

After that check if there are still errors..and proceed with the above recommended Frigidaire dishwasher troubleshooting codes  steps if you did not succeed.

Frigidaire dishwasher UO code fix

Frigidaire dishwasher troubleshooting codes  (Frigidaire dishwasher troubleshooting error codes) – Final words

If, by any chance, the Frigidaire dishwasher code your unit is showing is not in this Frigidaire dishwasher repair manual, then search for your specific model’s tech sheet.

That’s where you are likely to find all Frigidaire dishwasher fault codes that are specific to your model along with how to resolve each.

Oh, and you can take the unit into diagnostic(test) mode by pressing the High Temp together with the Start/Cancel keys simultaneously(until Frigidaire dishwasher test mode starts)…

Why we suggest so is because you can further troubleshoot what’s actually making your appliance act up in a methodical way.

Otherwise, we hope this has helped you reset Frigidaire dishwasher error code ’s you were seeing on the display.

Frigidaire gallery dishwasher error codes [meaning and fixes]

Frigidaire dishwasher diagnostic mode [how to enter], frigidaire gallery dishwasher troubleshooting manual, frigidaire dishwasher control panel reset (step –by- step), frigidaire dishwasher not starting lights blinking [fixed], how to reset a frigidaire gallery dishwasher (instructions), frigidaire professional dishwasher troubleshooting guide, leave a comment cancel reply.

Save my name, email, and website in this browser for the next time I comment.

Customer Support 6 days a week

  • Call or text 1-877-477-7278
  • Repair Forum

AppliancePartsPros.com - appliance parts from the Pros!

  • Shop for Parts
  • Get Repair Help
  • Dishwasher Parts
  • Dryer Parts
  • Microwave Parts
  • Range & Oven Parts
  • Refrigerator Parts
  • Washer Parts
  • All Appliance Parts

Fix Your Frigidaire Dishwasher: Common Frigidaire Dishwasher Problems & Solutions

Frigidaire Dishwasher

Having trouble with your Frigidaire dishwasher not cleaning properly, showing error codes, leaking water, making unusual noises or failing to start or complete cycles? Don't call a technician yet, our DIY troubleshooting tips can help you accurately identify issues and handle basic Frigidaire dishwasher repairs yourself in no time. Whether it's soap residue left on dishes, annoying grinding noises, broken spray arms, unexpected pooling of water on the floor, or failure to effectively wash the dishes, we provide the knowledge you need to diagnose the specific problem and fix many common issues. Learn what's causing your Frigidaire dishwasher woes based on the symptoms, then gain the skills to get your appliance washing dishes sparkling clean again. Additionally, check our inventory for OEM replacement Frigidaire dishwasher parts if you find the issue requires a replacement

frigidaire dishwasher problem solving

Frigidaire Dishwasher buttons not working

frigidaire dishwasher problem solving

Frigidaire Dishwasher dispenser not dispensing soap

frigidaire dishwasher problem solving

Frigidaire Dishwasher has a burning smell

frigidaire dishwasher problem solving

Frigidaire Dishwasher leaking

frigidaire dishwasher problem solving

Frigidaire Dishwasher leaking from motor area

frigidaire dishwasher problem solving

Frigidaire Dishwasher lights flashing or blinking

frigidaire dishwasher problem solving

Frigidaire Dishwasher making noise

frigidaire dishwasher problem solving

Frigidaire Dishwasher not cleaning

frigidaire dishwasher problem solving

Frigidaire Dishwasher not draining

frigidaire dishwasher problem solving

Frigidaire Dishwasher not drying dishes

frigidaire dishwasher problem solving

Frigidaire Dishwasher overflowing

frigidaire dishwasher problem solving

Frigidaire Dishwasher stops mid-cycle

frigidaire dishwasher problem solving

Frigidaire Dishwasher won't fill

frigidaire dishwasher problem solving

Frigidaire Dishwasher won't latch

frigidaire dishwasher problem solving

Frigidaire Dishwasher won't start

  • Dehumidifier
  • Garbage disposal
  • Oven / Microwave Combo
  • Range vent hood
  • Ranges / Stove / Oven
  • Refrigerator
  • Trash compactor
  • Washer Dryer Combo
  • Hedge trimmer
  • Leaf blower
  • Log splitter
  • Pole pruner
  • Pressure washer
  • Small engine
  • String trimmer
  • Wood chipper
  • Fault Codes
  • Kitchen Aid
  • Sears / Kenmore

We are here to help you!

Connecting with agent . . .

Please introduce yourself to start live chat

Thank you for chatting with us. We are always happy to help you!

Are you sure you want to leave the chat? Connection with the agent will be lost

Do you want to continue chat or start new sesson?

Appliances made simple logo

Fixing Your Frigidaire Dishwasher: 7 Common Problems & Solutions

Common problems with frigidaire dishwashers not cleaning dishes.

Frigidaire has long been a leader in the manufacturing of household appliances, particularly dishwashers, but these appliances can sometimes fail to function correctly without any warning. Dishwashers that no longer clean dishes properly can be a major hassle, making it necessary to troubleshoot and identify the problem in order to get the dishwasher up and running again.

This article covers some of the more common issues that cause a Frigidaire machine not cleaning dishes properly and provides solutions for each. All the models mentioned in this article, such as the DW1800Y0, DW4500FW1, DW5900PW1, or any other non-listed models, should be treated similarly when repairing.

What could be causing it not to clean dishes properly?

There can be a variety of reasons why it may not clean dishes properly. Some of the more common issues include a clogged water inlet valve, a worn or broken water pump belt, a clogged center spray arm or filter, or worn out tub seals or bearings. Each of these problems can cause the appliance to become inefficient, leaving dishes unclean after a cycle has finished.

How do I fix a Frigidaire DW1800Y0 dishwasher not cleaning dishes?

If you have a Frigidaire DW1800Y0 dishwasher that is not cleaning dishes properly, the first step is to check the water inlet valve for signs of clogging or blockage. If the valve appears to be clogged, remove and clean it with warm water. Another possible reason for an inefficient machine is a worn or broken water pump belt. Check the belt for wear and tear and replace as needed. If the center spray arm is clogged, remove and clean it with warm water and dish soap.

What should I do if my Frigidaire DW4500F isn’t cleaning dishes?

For issues with a Frigidaire DW4500FW1, the first step is to examine the filter system, checking for any clogs or debris. If the filter appears to be dirty or blocked, remove it and clean it with warm, soapy water. Additionally, make sure to check the center spray arm and water inlet valve, both of which may be clogged or blocked. Lastly, inspect the tub seals and bearings, replacing anything that looks worn or damaged.

leaking dishwasher due to door hinge problems

What are the most common problems with Frigidaire dishwashers?

The most common problems with Frigidaire dishwashers are related to their water inlet valves, water pumps, filters, and tub seals. Clogs and blockages in pipes and valves can lead to an inefficient appliance, while worn out parts can cause further problems.

How can I troubleshoot a Frigidaire DW5900PW1 not cleaning dishes?

When troubleshooting a Frigidaire DW5900PW1 dishwasher not cleaning dishes properly, the first step is to check the water inlet valve for any clogging or buildup. Additionally, make sure to check the filter system for any blockages or debris. A clogged center spray arm can also prevent it from cleaning dishes properly, so it’s important to remove and clean this as well. Lastly, inspect the tub seals and bearings for any worn-out parts that need replacing.

Can clogged water inlet valves prevent a Frigidaire from cleaning dishes?

Yes, a clogged water inlet valve can cause a Frigidaire dishwasher to not clean dishes properly. The valve is responsible for supplying water, so any kind of build-up or blockage will restrict the flow of water, leading to inefficient performance.

Frigidaire Dishwasher Rack Repair Kit or Paint 5303310273

Are there any quick fixes for a Frigidaire not cleaning dishes?

Unfortunately, there are no quick fixes for a Frigidaire dishwasher not cleaning dishes properly. The only way to get it back to working correctly is to identify the root cause of the problem and repair or replace any faulty parts.

How can I determine if a water pump belt is worn or broken?

In order to determine if a Frigidaire dishwasher’s water pump belt is worn or broken, you will have to open it up and inspect the belt itself. If the belt is visibly frayed or appears to be stretched out, it will need to be replaced.

Is it possible for a clogged center spray arm to cause a Frigidaire dishwasher not to clean dishes?

Yes, a clogged center spray arm can prevent a Frigidaire dishwasher from cleaning dishes properly. This part is responsible for spraying water throughout, so if it’s blocked with debris or mineral deposits, it won’t be able to effectively distribute water.

What are the steps for replacing parts in a Frigidaire dishwasher to get it to clean dishes properly?

Replacing parts in a Frigidaire dishwasher to get it to clean dishes properly requires a few steps. The first step is to identify the part that needs to be replaced, then locate and purchase the correct replacement part for your model. Once you have the new part, you’ll need to remove the old part, clean any areas where the new part will be attached, then install the new part. Finally, make sure to test it to ensure it is cleaning dishes properly.

Once you’ve obtained the correct part, the next step is to disconnect the dishwasher’s power source and remove the faulty part. After that, simply replace the part with the new one and reconnect the power source to test it.

Expert Tip:

When troubleshooting a Frigidaire dishwasher not cleaning dishes properly, remember to check for blockages in the water inlet valve, worn or broken water pump belt, clogged center spray arm, and worn out tub seals or bearings. If you’re unfamiliar with how to open it up and check these parts, consult the owner manual or technical support from the manufacturer.

Can worn-out tub seals or bearings prevent a Frigidaire dishwasher from cleaning dishes?

Yes, worn out tub seals or bearings can lead to an inefficient Frigidaire dishwasher not cleaning dishes properly. The tub seals act as a barrier to prevent water from leaking out, while the bearings allow the tub to rotate. If these parts become worn out or broken, it can cause a disruption in the rotation of the tub, resulting in an inefficient appliance.

How do I check for clogs in my Frigidaire dishwasher water inlet valve?

One way to check for clogs in the Frigidaire dishwasher water inlet valve is to remove the valve and examine the area where the water enters. If there is any blockage or buildup, it will need to be cleaned with warm soapy water in order to restore the performance.

Is it important to clean the filter system on a regular basis for a Frigidaire dishwasher?

Yes, it is important to regularly clean the filter system on a Frigidaire dishwasher in order to maintain its efficient performance. Doing so will help to prevent clogs or debris from building up, which can reduce the effectiveness.

What should I do if I can’t locate the source of the problem with my Frigidaire dishwasher?

If you are unable to locate the source of the problem with your Frigidaire dishwasher, it can be beneficial to contact a professional repair technician . A technician can inspect it and quickly diagnose the issue, saving you time and money in the long run.

What is the best way to clean the center spray arm of a Frigidaire dishwasher?

The best way to clean the center spray arm of a Frigidaire dishwasher is to submerge it in a mixture of warm water and dish soap. Let the spray arm soak for a few minutes, and then use a soft-bristled brush to scrub away any blockages or debris. Make sure to rinse the arm afterward with warm water.

Are there any common mistakes to avoid when troubleshooting a Frigidaire dishwasher?

Yes, some common mistakes to avoid when troubleshooting a Frigidaire dishwasher include assuming the cause of the problem before inspecting it and forgetting to check the filter system. Additionally, it is important to make sure all the parts are correctly installed after performing repairs.

What steps can I take to fix the tub seals on my Frigidaire dishwasher?

In order to fix the tub seals on a Frigidaire dishwasher , you will need to remove the old tub seal, clean the area of any debris, and then install the new seal. This process requires tools, so it is recommended to consult a professional technician to ensure the job is done correctly.

Can mineral deposits cause my Frigidaire dishwasher to not clean dishes properly?

Yes, mineral deposits can cause a Frigidaire dishwasher to not clean dishes properly. Mineral deposits that build up over time can restrict the flow of water, preventing it from reaching all areas of the dishwasher and leaving dishes unclean.

If I replace the water pump belt on my Frigidaire dishwasher, what other parts should I inspect?

When replacing the water pump belt on a Frigidaire dishwasher, it is also important to inspect the center spray arm, filter system, and water inlet valve for any signs of clogging or blockage. Make sure to check the tub seals and bearings for any wear and tear, and make sure all parts are correctly installed after performing repairs.

The most common problems with Frigidaire dishwashers arise from their water inlet valves , water pumps, filters and tub seals. Clogs and blockages, as well as worn-out parts, can lead to inefficieny and unclean dishes. Troubleshooting a defective Frigidaire dishwasher requires an inspection of these components, as well as cleaning any debris, mineral deposits or blockages that may be present. It is also important to remember to check and assess the water pump belt and tub seals for any signs of wear or damage. Professional help should be sought if the source of the problem cannot be identified.

' src=

Written by David Lewis

David, a dedicated engineering student, is a rising authority in the tech and gaming world. He's known for his innovative problem-solving skills and hands-on approach to engineering projects. When he's not immersed in his studies, he's exploring the latest gaming trends, bringing a fresh and informed perspective to his discussions. David's relentless pursuit of knowledge and his passion for engaging in meaningful dialogues make him a trustworthy source for insightful, experience-based content.

Appliances made simple. 

frigidaire dishwasher problem solving

Apartso

Frigidaire Dishwasher Troubleshooting Guide

Are you facing issues with your Frigidaire dishwasher? Don’t worry, our comprehensive Frigidaire Dishwasher Troubleshooting Guide is here to help you diagnose and resolve common problems, ensuring your dishwasher runs smoothly and efficiently.

With step-by-step instructions and expert tips, you’ll be able to troubleshoot with confidence and get your dishwasher back to its sparkling best in no time.

“Don’t let dishwashing problems dampen your spirits. Find your fix!”

Introduction

Frigidaire dishwashers are known for their reliable performance, innovative features, and sleek design. They offer a range of types, sizes, and advanced technologies for efficient and convenient dishwashing.

Frigidaire prioritizes energy efficiency and sustainability, with many models being ENERGY STAR® certified. Overall, Frigidaire dishwashers provide a reliable and efficient solution for households of all sizes.

Types of Frigidaire Dishwashers

Here are the types of Frigidaire dishwashers:

Built-in Dishwashers : These dishwashers are designed to be installed directly into your kitchen cabinetry, providing a seamless and integrated look. They offer various sizes and configurations to fit different kitchen layouts.

Portable Dishwashers : Portable dishwashers are freestanding units that can be moved around and connected to the kitchen faucet when needed. They are ideal for those who don’t have a dedicated space for a built-in dishwasher or for renters.

Compact Dishwashers : Compact dishwashers are smaller in size and are designed for kitchens with limited space. They offer the convenience of a dishwasher while taking up less room, making them suitable for apartments, small kitchens, or as a secondary dishwasher.

Drawer Dishwashers : Frigidaire also offers drawer dishwashers, which feature separate drawers that can be operated independently. This allows for more flexible usage and the ability to run smaller loads or different wash cycles simultaneously.

These are the main types of Frigidaire dishwashers, each with its own advantages and suitability for different kitchen setups and user preferences.

Frigidaire Dishwasher Series

Here are some of the Frigidaire dishwasher series:

Frigidaire Gallery Series : The Frigidaire Gallery series offers a range of stylish and feature-rich dishwashers. They are known for their sleek design, advanced cleaning technologies, and a variety of wash cycle options. The Gallery series often incorporates smudge-proof stainless steel finishes and customizable features for a modern kitchen aesthetic.

Frigidaire Professional Series : The Frigidaire Professional series is designed for those who seek high-performance dishwashers with professional-grade features. These dishwashers often include powerful cleaning capabilities, advanced drying systems, and durable construction. They are built to withstand heavy use and deliver exceptional results.

Frigidaire Affinity Series : The Frigidaire Affinity series focuses on combining efficiency with versatility. These dishwashers offer a range of innovative features such as adjustable racks, quiet operation, and energy-saving options. The Affinity series is known for delivering reliable performance and accommodating various dishwashing needs.

Frigidaire Classic Series : The Frigidaire Classic series provides reliable and affordable dishwashers without compromising on quality. These dishwashers offer essential features for efficient cleaning and simple operation. They are a budget-friendly option for those seeking a dependable dishwasher without extra frills.

Please note that Frigidaire may introduce new series or discontinue certain series over time. It is always recommended to check the latest product offerings on Frigidaire’s official website or consult with a retailer for the most up-to-date information.

Popular Frigidaire Dishwasher Models

Here is a list of 20 popular Frigidaire dishwasher models.

  • Frigidaire FFCD2418US
  • Frigidaire FGID2466QF
  • Frigidaire FFID2426TS
  • Frigidaire FGID2479SF
  • Frigidaire FFCD2413US
  • Frigidaire FFBD2412SS
  • Frigidaire FGID2468UD
  • Frigidaire FFCD2418UW
  • Frigidaire FGID2476SF
  • Frigidaire FFID2426TD
  • Frigidaire FFBD1831US
  • Frigidaire FGID2468UF
  • Frigidaire FFCD2418UB
  • Frigidaire FFCD2418USW
  • Frigidaire FGID2466QW
  • Frigidaire FFBD1831UW
  • Frigidaire FGID2466QB
  • Frigidaire FFCD2418UT
  • Frigidaire FFID2426TW
  • Frigidaire FGID2474QF

Please keep in mind that this list is not exhaustive and is subject to change as new models are introduced and older ones are phased out. It’s always best to check with Frigidaire or authorized retailers for the most current and popular models available.

Common Problems with Frigidaire Dishwashers

Here are 10 common problems that users may experience with Frigidaire dishwashers:

Poor Cleaning Performance : The dishwasher may not effectively clean dishes, leaving residue or spots behind.

Dishes Not Drying : The dishwasher may complete the cycle, but dishes remain wet or have water spots after drying.

Leaking Water : Water leakage can occur during or after the dishwasher cycle, potentially causing damage to the surrounding area.

Noisy Operation : Excessive noise during operation can be caused by various factors, such as worn-out parts or improper installation.

Dishwasher Not Draining : The dishwasher may fail to drain properly, resulting in standing water at the bottom of the tub.

Foul Odors : Unpleasant smells may emanate from the dishwasher, indicating a buildup of food particles or mold.

Control Panel Malfunctions : Issues with the control panel, such as unresponsive buttons or error messages, can disrupt the dishwasher’s operation.

Spray Arm Blockage : Clogged spray arms can impede the water flow and reduce cleaning effectiveness.

Faulty Door Latch : A faulty door latch may prevent the dishwasher from starting or cause it to stop mid-cycle.

Error Codes : The dishwasher may display error codes, indicating specific malfunctions or issues that need to be addressed.

It’s important to note that these problems can have various causes, and troubleshooting steps may differ depending on the specific model.

Consulting the dishwasher’s user manual or contacting Frigidaire customer support can provide more detailed guidance for resolving these issues.

“For comprehensive appliance troubleshooting, check out the Repair Clinic Appliance Troubleshooting Guide. It provides step-by-step instructions to help you diagnose and fix issues the Frigidaire dishwashers.”

Commonly Damaged Parts

Here are some commonly damaged parts of Frigidaire dishwashers:

Dishwasher Door Seal/Gasket : The door seal/gasket is prone to wear and tear over time, leading to leaks and water seepage.

Spray Arms : The spray arms can get clogged or damaged, affecting the dishwasher’s cleaning performance.

Drain Pump : The drain pump can become clogged or malfunction, causing drainage issues or water pooling in the dishwasher.

Heating Element : The heating element can fail or become damaged, resulting in poor drying performance or cold water during cycles.

Door Latch Assembly : The door latch assembly can break or become misaligned, preventing the dishwasher from starting or staying closed during operation.

Float Switch : The float switch, responsible for monitoring the water level in the dishwasher, can get stuck or malfunction, leading to overfilling or underfilling issues.

Electronic Control Board : The control board can experience electrical failures, resulting in various operational issues or error codes.

Water Inlet Valve : The water inlet valve can develop leaks or fail to open/close properly, leading to water supply issues or inconsistent water flow.

Silverware Basket : The silverware basket can crack or have broken dividers, affecting the organization and protection of utensils.

Filters : Dishwasher filters can become clogged with food debris, affecting the dishwasher’s performance and causing drainage problems.

It’s worth noting that not all of these parts may be present in every Frigidaire dishwasher model.

Attention: If you encounter any issues or suspect damage to specific parts, consulting the dishwasher’s user manual or contacting Frigidaire customer support can provide more information on replacement parts and repair options.

“Click here to find parts and check prices at Repair Clinic for your Frigidaire dishwasher.”

Troubleshooting Frigidaire Dishwashers

Troubleshooting Frigidaire Dishwashers can help you identify and resolve common issues, ensuring optimal performance and efficient cleaning.

This section provides a comprehensive guide to troubleshooting various problems, including error codes, poor cleaning performance, drainage issues, and more.

1. Dishwasher Poor Cleaning Performance

Effects of poor cleaning performance:.

  • Dishes have residue or food particles after a cycle.
  • Glasses and silverware may appear cloudy or have spots.
  • Food particles may accumulate in the dishwasher.

Possible Damaged Parts:

  • Spray Arms : Clogged or damaged spray arms can result in insufficient water circulation and inadequate cleaning.
  • Filters : Clogged filters can restrict water flow and prevent proper cleaning.
  • Water Inlet Valve : A faulty water inlet valve may not supply enough water to effectively clean dishes.
  • Detergent Dispenser : A malfunctioning detergent dispenser can prevent the proper distribution of detergent during the cycle.
  • Wash Pump Motor : A malfunctioning wash pump motor may not provide sufficient water pressure for effective cleaning.

Step-by-Step Troubleshooting Guide:

  • Ensure dishes are loaded properly, avoiding overcrowding and blocking spray arms.
  • Arrange dishes and utensils to allow proper water circulation.
  • Remove the spray arms from the dishwasher.
  • Check for clogs or debris in the spray arm holes.
  • Use a toothpick or small brush to remove any obstructions.
  • Rinse the spray arms thoroughly and reinstall them.
  • Locate and remove the dishwasher filters.
  • Rinse the filters under running water to remove any trapped debris.
  • Use a soft brush to gently scrub away stubborn particles.
  • Reinstall the filters securely.
  • Ensure the water supply valve is fully open.
  • Check for kinks or blockages in the water supply hose.
  • Clean the water inlet valve screen if it’s clogged.
  • Check for any blockages or residue in the detergent dispenser.
  • Clean the dispenser compartment with warm, soapy water.
  • Ensure the dispenser door opens freely during the cycle.
  • Run the kitchen faucet on hot water for a few minutes before starting the dishwasher.
  • This ensures hot water is readily available for optimal cleaning performance.
  • Ensure you are using the correct type and amount of dishwasher detergent recommended by Frigidaire.
  • Avoid using excessive detergent, as it can lead to poor cleaning and residue buildup.
  • Place a dishwasher-safe cup filled with white vinegar on the top rack.
  • Run a hot water cycle without any dishes to help remove buildup and odors.
  • Refer to the user manual for specific troubleshooting steps or recommendations for your Frigidaire dishwasher model.
  • Consider contacting Frigidaire customer support if the issue persists or if any parts need replacement.

By following these troubleshooting steps, you can address poor cleaning performance in your Frigidaire dishwasher and ensure sparkling clean dishes after each cycle.

2. Dishes Not Drying

Dish drying issues can be frustrating after running a dishwasher cycle. This troubleshooting guide will help you identify and resolve the common causes of dishes not drying in your Frigidaire dishwasher.

Surely, following the step-by-step instructions, you can regain optimal drying performance.

Effects of Not Drying Dishes:

When dishes don’t dry properly, you may notice water spots, streaks, or moisture remaining on the dishes and inside the dishwasher. This can affect the overall cleanliness and appearance of your dishes.

Several parts can contribute to drying problems in a Frigidaire dishwasher. Here are some potentially damaged or malfunctioning parts to check:

  • Heating Element : A faulty or damaged heating element can result in insufficient heat during the drying cycle.
  • Vent : A malfunctioning vent can restrict airflow, preventing proper evaporation of moisture from the dishwasher.
  • Rinse Aid Dispenser : If the rinse aid dispenser is empty or not dispensing properly, it can hinder the drying process.

Troubleshooting Guide – Dishes Not Drying:

Step 1: Check Rinse Aid Level and Settings

  • Ensure that your dishwasher has rinse aid and that the dispenser is filled according to the manufacturer’s instructions.
  • Adjust the rinse aid settings on your dishwasher if applicable. Consult the user manual for specific instructions on adjusting rinse aid levels.

Step 2: Load Dishes Properly

  • Ensure that dishes are loaded in a way that allows proper water drainage and airflow during the drying cycle.
  • Avoid overcrowding the dishwasher, as this can restrict airflow and impede drying.

Step 3: Verify Water Temperature

  • Verify that the water entering your dishwasher is hot. Run the hot water faucet nearest to your dishwasher before starting a cycle to ensure the dishwasher receives hot water from the beginning.

Step 4: Check Heating Element

  • Turn off the dishwasher and disconnect it from the power source.
  • Locate the heating element at the bottom of the dishwasher. Inspect it for any visible damage or signs of burning.
  • If the heating element appears damaged or burnt, it may need to be replaced. Contact Frigidaire customer support or a professional technician for assistance.

Step 5: Examine Vent and Airflow

  • Ensure that the vent opening on the dishwasher door is unobstructed and free from debris.
  • Check for any visible damage or blockage in the vent system. Clear any obstructions or debris if necessary.
  • If you suspect a faulty vent, contact Frigidaire customer support or a professional technician for further troubleshooting and repair.

Step 6: Run a Different Wash Cycle

  • Try running a different wash cycle specifically designed for enhanced drying performance, if available. Consult your dishwasher’s user manual for information on specific cycles that optimize drying.
  • Observe if the dishes dry properly with the new cycle. If the issue persists, proceed to the next step.

Step 7: Contact Frigidaire Customer Support or Professional Technician

If none of the previous steps resolve the drying issue, it’s recommended to contact Frigidaire customer support or schedule a service visit from a professional technician.

No question, they can provide further assistance in diagnosing and repairing the underlying problem.

3. Dishwasher Leaking Water

Leaking water is a common issue that can occur with Frigidaire dishwashers. This troubleshooting guide will help you identify the possible causes of the leakage and provide step-by-step instructions on how to address the problem.

Effects of Using a Leaking Dishwasher:

Using a dishwasher that is leaking water can lead to potential water damage to your kitchen flooring, cabinets, or nearby appliances. It is crucial to address the issue promptly to prevent further damage and ensure the proper functioning of your dishwasher.

  • Door Seal/Gasket : A worn or damaged door seal/gasket can result in water seepage around the dishwasher door.
  • Tub Seal : A faulty tub seal can cause water to leak from the bottom of the dishwasher.
  • Water Inlet Valve : A damaged or malfunctioning water inlet valve can lead to water leakage during the dishwasher’s operation.
  • Drain Hose : A loose or damaged drain hose can cause water to leak from the dishwasher during the draining process.
  • Tub or Pump Assembly : Cracked or damaged components in the tub or pump assembly can result in water leakage.

Troubleshooting Steps: Dishwasher Leaking Water

  • Turn off the dishwasher and unplug it from the power source to ensure safety during troubleshooting.
  • Overloading the dishwasher with too many dishes or improper loading can lead to water leakage. Ensure that the dishwasher is not overloaded and that items are properly arranged.
  • Examine the door seal/gasket for signs of wear, damage, or debris. Clean the seal/gasket with a damp cloth and check for any visible cracks or tears. Replace the seal/gasket if necessary.
  • Inspect the tub seal located at the bottom of the dishwasher for any visible damage or deterioration. If the seal is damaged, it may need to be replaced.
  • Inspect the water inlet valve for any leaks or loose connections. Tighten any loose connections and replace the valve if it is damaged or malfunctioning.
  • Check the drain hose for any cracks, kinks, or loose connections. Ensure that the hose is properly attached to the dishwasher and the drain system. Replace the hose if needed.
  • Examine the tub and pump assembly for any visible cracks, damage, or loose components. If any parts are damaged, they may need to be replaced.
  • After addressing the possible causes and making necessary repairs, run a test cycle to check for any remaining leakage. Observe the dishwasher closely during the cycle to ensure there is no water leakage.
  • If the leakage persists or you are unable to identify the cause, it is recommended to contact Frigidaire customer support or a professional technician for further assistance.

Remember to always follow the safety guidelines provided by Frigidaire and consult the dishwasher’s user manual for specific instructions related to your model.

4. Dishwasher Noisy Operation

A noisy dishwasher can be disruptive and indicate underlying issues. In this troubleshooting guide, we will address common causes of noisy operation in Frigidaire dishwashers and provide step-by-step instructions to help diagnose and resolve the problem.

Effects of Noisy Operation:

  • Disruption : Excessive noise can disturb your household activities, especially if the dishwasher is located in an open living area or near bedrooms.
  • Inefficient Cleaning : Noise can indicate issues with spray arms or other components, affecting the dishwasher’s cleaning performance.
  • Potential Damage : Persistent noise may indicate parts that are not functioning properly, which can lead to further damage if not addressed promptly.

Noisy operation in a Frigidaire dishwasher can be attributed to various damaged or malfunctioning parts, including:

  • Wash Arms : Clogs, cracks, or loose fittings can cause noisy spinning of the wash arms.
  • Pump Motor : A faulty or worn-out pump motor can create excessive noise during operation.
  • Bearings : Worn-out bearings in the pump assembly or motor can result in grinding or screeching noises.
  • Spray Arm Mounting Bracket : A loose or damaged spray arm mounting bracket can cause rattling or clanking sounds.

Troubleshooting Steps:

Step 1: Check for Obstructions

  • Turn off the dishwasher and ensure it is fully disconnected from the power supply.
  • Inspect the wash arms for any food debris, utensils, or other obstructions.
  • Carefully remove any blockages using a soft brush or toothpick.
  • Ensure the wash arms are securely attached and positioned correctly.

Step 2: Examine the Pump and Motor

  • Remove the bottom rack and locate the dishwasher’s pump and motor assembly.
  • Check for any loose or damaged components, such as loose connections, worn-out seals, or broken parts.
  • Tighten any loose fittings or replace damaged parts as needed.

Step 3: Inspect Bearings and Spray Arm Mounting Bracket

  • If the noise persists, you may need to inspect the bearings and spray arm mounting bracket.
  • Consult the dishwasher’s user manual or refer to Frigidaire’s official documentation for guidance on accessing and examining these components.
  • Look for signs of wear, damage, or misalignment.
  • If necessary, replace worn-out bearings or damaged spray arm mounting brackets.

Step 4: Level the Dishwasher

  • Check if the dishwasher is level by using a spirit level.
  • Adjust the leveling feet or base as needed to ensure the dishwasher is stable and balanced.

Step 5: Run a Test Cycle

  • Once you have completed the necessary inspections and repairs, reconnect the dishwasher to the power supply.
  • Run a test cycle to verify if the noise has been resolved.

If the issue persists or you are uncertain about performing the troubleshooting steps, it is recommended to seek professional assistance from a qualified technician or contact Frigidaire customer support for further guidance.

Remember to prioritize safety throughout the troubleshooting process, disconnect the dishwasher from power when necessary, and consult the dishwasher’s user manual for model-specific instructions.

5. Dishwasher Not Draining

Dishwasher drainage issues can be frustrating, but they are often solvable with proper troubleshooting. In this guide, we will address the possible causes and provide step-by-step instructions to troubleshoot a Frigidaire dishwasher that is not draining properly.

Effects of Not Draining: When a dishwasher fails to drain properly, it can result in standing water at the bottom of the tub, dirty dishes, and potential water leakage.

It is important to address this issue promptly to avoid further complications and ensure optimal dishwasher performance.

Several parts can contribute to a dishwasher not draining properly. Commonly damaged parts that may be causing the issue include:

  • Drain Pump : Clogging or malfunctioning of the drain pump can hinder water removal.
  • Drain Hose : A kinked, blocked, or damaged drain hose can restrict water flow and prevent proper drainage.
  • Filter : A clogged or dirty filter can impede water flow and cause drainage problems.
  • Air Gap or Garbage Disposal : If the dishwasher is connected to an air gap or garbage disposal, a clog or blockage in these components can hinder drainage.

Troubleshooting Guide: Dishwasher Not Draining

Step 1: Check for Clogs or Blockages

  • Remove any dishes or debris from the dishwasher.
  • Inspect the drain pump, drain hose, and air gap (if applicable) for any visible clogs or blockages.
  • Clear any debris using a soft brush or a cloth. Take caution not to damage any parts.

Step 2: Clean the Filter

  • Locate and remove the dishwasher filter. Refer to the user manual for specific instructions as the filter placement may vary.
  • Rinse the filter under running water to remove any debris or residue.
  • Inspect the filter for any damage. If damaged, replace it with a new one.

Step 3: Check the Drain Hose

  • Verify that the drain hose is properly connected to the dishwasher and the drain point.
  • Ensure that the drain hose is not kinked, twisted, or blocked.
  • If a blockage is present, use a long, flexible brush or plumber’s snake to gently clear the obstruction.

Step 4: Inspect the Air Gap or Garbage Disposal (if applicable)

  • If your dishwasher is connected to an air gap or garbage disposal, check for any clogs or blockages.
  • Clear any debris or buildup using a small brush or by flushing water through the component.

Step 5: Test the Drainage

  • Reassemble any parts that were removed during the troubleshooting process.
  • Restore power to the dishwasher and run a short cycle with no dishes inside.
  • Observe if the dishwasher is draining properly. Check for any signs of standing water at the end of the cycle.

If the problem persists after following these troubleshooting steps, it is recommended to contact Frigidaire customer support or a professional appliance repair service for further assistance.

They can help identify any underlying issues and guide you through additional troubleshooting or arrange for necessary repairs.

Remember to refer to the user manual provided with your specific dishwasher model for detailed instructions and to ensure compatibility with replacement parts.

6. Dishwasher Foul Odors

Foul odors coming from a dishwasher can be unpleasant and indicate the presence of food debris, mold, or bacterial buildup.

This troubleshooting guide will help you identify the causes of foul odors in your Frigidaire dishwasher and provide step-by-step instructions on how to resolve the issue.

Effects of Using a Dishwasher with Foul Odors:

  • Unpleasant Smells : Foul odors can permeate your kitchen and affect the cleanliness of your dishes.
  • Poor Hygiene : Lingering odors may indicate the presence of bacteria or mold, which can compromise the sanitation of your dishwasher and dishes.
  • Unappetizing Food Residue : Odors can transfer to your dishes, leaving them with an unpleasant smell that affects the taste of your food.
  • Filter : A clogged or dirty filter can trap food particles and create a breeding ground for bacteria, resulting in foul odors.
  • Spray Arms : Clogged or damaged spray arms can lead to inefficient cleaning and the accumulation of food debris, contributing to odors.
  • Door Gasket : A damaged or dirty door gasket can trap moisture and food residue, creating an environment for odor-causing bacteria to thrive.
  • Drain Hose : A clogged or partially blocked drain hose can prevent proper drainage, causing stagnant water and foul odors.
  • Interior Tub: Mold or mildew can develop on the interior walls or corners of the dishwasher, leading to persistent odors.
  • a. Locate the dishwasher’s filter, usually at the bottom of the dishwasher tub.
  • b. Remove the filter according to the user manual instructions.
  • c. Rinse the filter under running water to remove food debris and buildup.
  • d. Scrub the filter gently with a soft brush to dislodge stubborn residue.
  • e. Reinstall the filter securely.
  • a. Remove the spray arms by twisting or unlatching them, following the user manual guidelines.
  • b. Check for any clogs or obstructions in the spray arm holes.
  • c. Use a small brush or toothpick to clear any debris from the spray arm holes.
  • d. Rinse the spray arms thoroughly to remove any remaining debris.
  • e. Reinstall the spray arms securely.
  • a. Inspect the door gasket for signs of damage or mold.
  • b. Mix a solution of equal parts water and vinegar or use a dishwasher-safe cleaning agent.
  • c. Moisten a cloth or sponge with the cleaning solution and wipe the door gasket thoroughly.
  • d. Pay close attention to the folds and crevices of the gasket.
  • e. Rinse the gasket with clean water and dry it with a towel.
  • a. Disconnect the dishwasher from the power source.
  • b. Locate the drain hose at the back of the dishwasher.
  • c. Inspect the drain hose for any kinks, clogs, or damage.
  • d. If there are any clogs, use a plumber’s snake or a long, flexible brush to clear the obstruction.
  • e. Ensure that the drain hose is properly connected and not pinched or twisted.
  • f. Reconnect the dishwasher to the power source.
  • a. Empty the dishwasher of any dishes or debris.
  • c. Wipe the interior walls and corners of the dishwasher with the cleaning solution using a cloth or sponge.
  • d. Pay attention to areas with visible mold or mildew.
  • e. Rinse the interior thoroughly with clean water.
  • f. Leave the dishwasher door open to allow it to air dry.

If foul odors persist after following these troubleshooting steps, or if you notice any signs of damage to the dishwasher’s parts, it is recommended to consult the user manual or contact Frigidaire customer support for further assistance.

7. Control Panel Malfunctions

Control panel malfunctions can disrupt the normal operation of your Frigidaire dishwasher, causing inconvenience and frustration. This troubleshooting guide will help you identify and resolve common control panel issues, ensuring that your dishwasher operates smoothly.

Effects of Control Panel Malfunctions:

  • Unresponsive Buttons : The control panel may not respond when you press the buttons, preventing you from selecting desired settings or starting the dishwasher.
  • Error Messages : The control panel may display error codes or error messages, indicating specific malfunctions or issues that need to be addressed.
  • Inaccurate Display : The control panel’s display might show incorrect or garbled information, making it difficult to understand the dishwasher’s status or settings.
  • Electronic Control Board : A faulty control board can cause various control panel malfunctions, including unresponsive buttons or inaccurate displays.
  • Wiring Connections : Loose or damaged wiring connections between the control panel and the control board can result in erratic behavior or complete non-functionality of the panel.
  • Turn off the dishwasher and unplug it from the power outlet.
  • Wait for a few minutes, then plug the dishwasher back in.
  • Turn on the dishwasher and check if the control panel responds.
  • If the control panel displays an error code, consult the dishwasher’s user manual or Frigidaire’s official website for a list of error codes and their meanings.
  • Follow the recommended actions or troubleshooting steps provided for the specific error code.
  • Disconnect the dishwasher from the power supply.
  • Open the dishwasher door and locate the control panel.
  • Carefully remove the control panel cover to access the wiring connections.
  • Inspect the wiring connections between the control panel and the control board.
  • Ensure that all connections are secure and free from damage. Reconnect any loose or disconnected wires.
  • If the control panel continues to malfunction after power reset and checking the connections, the control board may be faulty.
  • Consult the dishwasher’s user manual or Frigidaire’s customer support for guidance on ordering a replacement control board.
  • Follow the manufacturer’s instructions or seek professional assistance to safely replace the control board.
  • If the troubleshooting steps above do not resolve the control panel malfunctions, it is recommended to contact Frigidaire’s customer support or schedule a service appointment with a certified technician.
  • They can provide further guidance, diagnose the issue accurately, and perform any necessary repairs or replacements.

Note: Remember to always refer to the dishwasher’s user manual or consult Frigidaire’s official resources for specific troubleshooting instructions and safety precautions.

8. Spray Arm Blockage

Spray arm blockage is a common issue that can impact the cleaning performance of your Frigidaire dishwasher. When the spray arms are clogged or obstructed, water cannot properly circulate, resulting in dishes not being thoroughly cleaned.

This troubleshooting guide will help you identify and resolve spray arm blockage problems in your Frigidaire dishwasher.

Effects of Spray Arm Blockage:

  • Poor Cleaning Performance : Dishes may come out of the dishwasher with food particles or residue still on them.
  • Water Not Reaching all Areas : Some areas of the dishwasher may not receive sufficient water spray, resulting in uneven cleaning.
  • Long Duration of Cleaning Cycles : If the spray arms are partially blocked, the dishwasher may need to run longer cycles to compensate for the reduced water flow.
  • Spray Arm : The spray arm itself may have debris or mineral buildup causing the blockage.
  • Spray Arm Nozzles : The small nozzles on the spray arm can become clogged with food particles or mineral deposits.
  • Filter : A dirty or clogged filter can lead to debris being carried onto the spray arms, causing blockage.

Take out the lower and upper dishwasher racks to access the spray arms and inspect them properly.

Examine the spray arms for any visible signs of debris or blockage. Remove any food particles, labels, or other obstructions.

Inspect the small nozzles on the spray arms and clean them with a small brush or toothpick. Be gentle to avoid damage to the nozzles.

Locate the dishwasher’s filter, typically located at the bottom of the dishwasher tub. Remove the filter and rinse it under warm water to remove any debris. If necessary, use a soft brush to scrub away stubborn residue. Ensure the filter is completely clean before reinserting it.

Check the water inlet to ensure it is not blocked or obstructed. Clean any debris or mineral buildup from the inlet valve using a soft brush or cloth.

Once you have cleaned the spray arms, filter, and water inlet, reassemble the dishwasher racks. Start a test cycle with no dishes inside to observe the spray arm performance. Ensure the spray arms rotate freely and distribute water evenly.

To prevent future blockages, perform routine maintenance by clearing food particles from dishes before loading them into the dishwasher. Clean the filter regularly, and periodically check and clean the spray arms and nozzles.

If the spray arm blockage problem persists even after following these troubleshooting steps, it may be necessary to contact Frigidaire customer support or a professional dishwasher repair service for further assistance.

Remember, always refer to your dishwasher’s user manual for specific instructions and safety guidelines related to your model.

9. Faulty Door Latch

The door latch of a Frigidaire dishwasher plays a crucial role in ensuring proper operation and sealing of the dishwasher during a cycle.

If you’re experiencing issues with a faulty door latch, such as the dishwasher not starting or stopping mid-cycle, it’s important to troubleshoot and address the problem promptly.

This guide will provide step-by-step instructions for troubleshooting a faulty door latch in your Frigidaire dishwasher.

Effects of Using a Dishwasher with a Faulty Door Latch:

  • Inability to Start : The dishwasher may not start or respond when attempting to initiate a cycle.
  • Interrupted Cycle: The dishwasher may start but stop mid-cycle, leaving dishes partially cleaned and water remaining in the tub.
  • Leaks and Water Seepage : A faulty door latch can cause water to leak or seep out during a cycle, leading to potential damage to the surrounding area.
  • Door Latch Assembly : The door latch assembly itself may be damaged or misaligned.
  • Door Latch Switch : The switch responsible for detecting the door’s closed position may be malfunctioning.
  • Door Lock Strike : The strike, which engages with the latch to secure the door, may be worn out or broken.

Examine the door latch assembly for any visible damage or misalignment. Ensure that it is securely fastened to the dishwasher.

Use a damp cloth or sponge to clean the latch and surrounding areas. Accumulated dirt or debris can sometimes interfere with proper latch engagement.

Locate the door latch switch inside the dishwasher door frame. Gently press and release the switch several times to ensure it moves freely. If the switch feels sticky or doesn’t move smoothly, it may need cleaning or replacement.

If the latch appears misaligned, use a screwdriver to loosen the screws holding it in place. Carefully reposition the latch, ensuring it aligns properly with the strike plate on the dishwasher body. Tighten the screws to secure the latch in its new position.

Examine the strike plate on the dishwasher body that engages with the door latch. Check for any signs of damage or wear. If the strike is worn or broken, it may need replacement.

Close the dishwasher door firmly and try to start a cycle. Pay attention to any error messages or indicators. If the dishwasher starts and operates normally, the door latch issue may be resolved. If not, continue troubleshooting.

Refer to the dishwasher’s user manual for specific troubleshooting instructions and further guidance on resolving door latch-related issues. Frigidaire’s customer support can also provide assistance if needed.

If the above troubleshooting steps do not resolve the issue with the faulty door latch, it’s recommended to contact a qualified technician or Frigidaire’s authorized service center for further diagnosis and repair.

Remember, always prioritize safety by disconnecting the dishwasher from the power source before attempting any troubleshooting or repair activities.

10. Frigidaire Dishwasher Error Codes

A Frigidaire dishwasher is a reliable and efficient appliance for cleaning your dishes. However, like any other machine, it may encounter issues from time to time.

This troubleshooting guide will help you identify common problems, understand the effects of using a malfunctioning dishwasher, determine possible damaged parts, and provide a step-by-step troubleshooting process for error codes.

Effects of Using a Malfunctioning Dishwasher:

Using a malfunctioning Frigidaire dishwasher can lead to various issues, including:

  • Poor cleaning performance, leaving residue or spots on dishes.
  • Inadequate drying, resulting in wet dishes or water spots.
  • Water leakage, causing damage to the surrounding area.
  • Excessive noise during operation, disrupting your kitchen environment.
  • Drainage problems, such as standing water in the dishwasher.

The following parts are commonly susceptible to damage in a Frigidaire dishwasher:

  • Dishwasher Door Seal/Gasket
  • Heating Element
  • Door Latch Assembly
  • Float Switch
  • Control Board
  • Water Inlet Valve
  • Silverware Basket

Step-by-Step Troubleshooting Guide: Error Codes

Consult your Frigidaire dishwasher’s user manual to identify the specific error codes and their meanings. The manual will provide valuable information and troubleshooting steps for each error code.

Turn off the dishwasher’s power at the circuit breaker for about one minute, then turn it back on. This simple reset can often resolve minor glitches or temporary errors.

Identify the error code displayed on your Frigidaire dishwasher’s control panel. Look up the error code in the manual or search online for specific information about its cause and possible solutions.

Inspect the dishwasher’s spray arms and filters for any blockages or debris that could be causing the error. Clean them thoroughly or replace damaged parts as needed.

Ensure that the dishwasher is receiving sufficient water supply. Check the water inlet valve for any blockages or malfunctions. Clear any obstructions and ensure the valve is opening and closing properly.

Examine the drain pump, drain hose, and air gap (if applicable) for any clogs or restrictions. Clear any debris and ensure proper drainage.

Check the dishwasher’s heating element, control board, and wiring connections for any signs of damage or malfunction. If necessary, consult a professional technician for further inspection or replacement.

If the error persists or you are unable to resolve the issue through troubleshooting, contact Frigidaire customer support or schedule a service appointment for professional assistance.

Remember, safety should always be a priority when troubleshooting appliances. If you’re unsure or uncomfortable performing any steps, it’s best to consult a professional technician or contact Frigidaire customer support for guidance.

Frigidaire Dishwasher Error Codes

Here are some common error codes that you may encounter on Frigidaire dishwashers:

ER/CL : This error code indicates a problem with the dishwasher’s door latch mechanism. It could be due to a faulty door latch assembly or a misalignment issue.

ER/SU : This code suggests a problem with the dishwasher’s vent assembly. It may indicate a malfunctioning vent motor or a blockage in the vent system.

ER/UF : This error code points to a drainage issue. It indicates that the dishwasher is not draining properly, possibly due to a clogged drain hose, a faulty drain pump, or an obstruction in the drainage system.

ER/LS: This code signifies a problem with the dishwasher’s lower spray arm. It may indicate a blockage or restriction in the spray arm’s movement or a malfunctioning spray arm motor.

ER/CL/TO : This error code indicates a problem with the dishwasher’s electronic control board. It suggests a communication error or a malfunctioning control board that may require professional diagnosis and repair.

ER/LE : This code suggests a problem with the dishwasher’s water leak detection system. It may indicate water leakage or a malfunctioning leak sensor.

ER/CO : This error code indicates a communication problem between the dishwasher’s control board and the user interface board. It may require professional diagnosis and repair.

ER/HS : This code suggests a problem with the dishwasher’s heating system. It may indicate a faulty heating element, a malfunctioning thermostat, or a wiring issue related to the heating system.

Please note that the specific error codes may vary depending on the model and generation of your Frigidaire dishwasher.

Consult your dishwasher’s user manual or contact Frigidaire customer support for accurate and model-specific information regarding error codes and their troubleshooting steps.

Tips to Maintain Frigidaire Dishwashers

Here are some tips to help you maintain your Frigidaire dishwasher and ensure its optimal performance:

Regular Cleaning : Clean the interior of the dishwasher regularly to remove any food particles, debris, or residue. Wipe down the door, gaskets, spray arms, and filters using a soft cloth or sponge.

Clean Filters : Clean or replace the dishwasher filters as recommended by the manufacturer. Clogged filters can affect the dishwasher’s performance and may lead to drainage issues.

Scrape Dishes : Before loading the dishwasher, scrape off excess food from dishes to prevent clogs and improve cleaning efficiency. Avoid placing large food particles or objects that can obstruct the spray arms.

Load Properly: Arrange dishes, glasses, and utensils in a way that allows water to flow freely and ensures even cleaning. Avoid overcrowding the dishwasher, as it can interfere with the spray patterns and reduce effectiveness.

Use the Right Detergent : Choose a high-quality dishwasher detergent recommended for your Frigidaire dishwasher. Follow the manufacturer’s instructions regarding the amount of detergent to use for each wash cycle.

Use Rinse Aid : Adding rinse aid to the dishwasher can help improve drying performance and reduce the appearance of water spots on dishes and glassware. Refill the rinse aid dispenser regularly.

Check Water Temperature : Ensure that the water entering the dishwasher is at the recommended temperature (usually around 120°F or 49°C). Hot water aids in effective cleaning and sanitizing.

Avoid Excessive Pre-rinsing : Most modern dishwashers, including Frigidaire models, are designed to handle lightly soiled dishes. Avoid excessive pre-rinsing, as it can waste water and detergent without providing additional benefits.

Inspect Hoses and Connections : Periodically check the dishwasher’s hoses and connections for leaks, cracks, or signs of damage. Replace any damaged parts promptly to prevent water damage or operational issues.

Schedule Regular Maintenance : Consider scheduling professional maintenance or servicing for your Frigidaire dishwasher at regular intervals. Professional technicians can inspect and address any potential issues before they become major problems.

By following these maintenance tips, you can keep your Frigidaire dishwasher in optimal condition, ensure reliable performance, and extend its lifespan.

Always refer to the user manual for specific maintenance instructions and recommendations provided by Frigidaire.

In conclusion, this Frigidaire Dishwasher Troubleshooting Guide provides valuable information for troubleshooting common issues, understanding the effects of using a malfunctioning dishwasher, identifying possible damaged parts, and following step-by-step troubleshooting for error codes.

By referring to this guide, you can effectively address problems such as poor cleaning performance, drainage issues, error codes, and more.

Maintaining your Frigidaire dishwasher is crucial for its optimal performance and longevity. Regular cleaning, proper loading, using the right detergent and rinse aid, and checking for leaks or damaged parts are essential maintenance practices that can help you avoid issues and ensure efficient operation.

Remember to consult your dishwasher’s user manual for specific instructions and recommendations from Frigidaire. In some cases, it may be necessary to contact Frigidaire customer support or schedule professional service for more complex problems.

By employing the troubleshooting techniques and maintenance tips outlined in this guide, certainly you can keep your Frigidaire dishwasher running smoothly, enjoying clean and spotless dishes for years to come.

“Visit Repair Clinic to find genuine Frigidaire dishwasher parts at competitive prices for your repair needs.”

More Appliance Troubleshooting and Repair Parts:

  • GE Dryer Troubleshooting Guide
  • Whirlpool Oven Troubleshooting Guide: Fix like a Pro!
  • Bosch Dishwasher Troubleshooting Guide: Easy Steps!

You might be interested:

frigidaire dishwasher problem solving

Leave a Comment Cancel reply

Save my name, email, and website in this browser for the next time I comment.

Fix My Home Tech

frigidaire dishwasher problem solving

Frigidaire Gallery Dishwasher Troubleshooting – 9 Problems Solved

In this guide we will delve into troubleshooting methods, for the Frigidaire Gallery Dishwasher. If you’re facing any concerns regarding its cleaning performance, water leakage or unusual noises don’t worry! We have you covered. Our comprehensive troubleshooting steps will assist you in identifying and resolving issues guaranteeing that your dishwasher operates seamlessly and effectively.

frigidaire dishwasher problem solving

Quick Troubleshooting Guide Frigidaire Gallery Dishwasher

1. dishwasher not cleaning properly, a. inspecting spray arms and nozzles.

One of the issues that many people have with frigidaire gallery dishwashers is that they often fail to effectively clean dishes. If you happen to notice any food residue or dirty dishes after a wash cycle its definitely time to figure out what’s causing the problem.

frigidaire dishwasher problem solving

B. Troubleshooting Spray Arms and Nozzles

Here’s a step, by step troubleshooting guide on how you can Frigidaire gallery dishwasher and resolve this issue;

1. Check for Blockages in Spray Arms; Begin by removing both the upper spray arms from your dishwasher. Take a look at them to see if there are any clogs, debris or mineral build-up blocking their effectiveness. Make sure to give them a cleaning under running water before putting them in place.

2. Inspect Spray Nozzles; It’s important to ensure that the spray nozzles on your spray arms are not blocked in any way. Use either a toothpick or a small brush to clear away any obstructions that may be hindering their function.

3. Examine Spinner Hub; If you find that your spray arms appear to be intact but they’re not spinning properly it would be wise to inspect the spinner hub. This component should rotate freely without any issues. However, if you notice any damage or problems with it may need replacement.

4. Adjust Spray Arm Positions; Take note of whether or not your spray arms are being obstructed by dishes, within the dishwasher. If necessary rearrange the dishes in order to allow for water flow during the cleaning cycle.

5. Verify Water Temperature; Keep in mind that proper cleaning also relies on having a water temperature within your dishwasher. Double check if your dishwasher is indeed receiving water for its cycles; if not adjust accordingly by modifying your water heater settings.

6. Use High Quality Detergent; Lastly always ensure that you’re using a notch dishwasher detergent known for its effectiveness and cleaning power.

7. Perform a cleaning cycle every now and then using a dishwasher cleaner to get rid of any residue that may have accumulated inside the machine.

C. Checking the Filters and Drain

It’s important to keep the filters and drain clean. Follow frigidaire gallery dishwasher troubleshooting steps to ensure effectively cleans.

1. Find and Remove the Filters; Depending on your dishwasher model you might have one or more filters. Take them out. Rinse them thoroughly under running water. Check for any damage while you’re, at it.

2. Clean the Filter Housing; Give the filter housing a wipe down and check for debris or food particles. Make sure there are no blockages in that area.

3. Inspect the Drain Area; Take a look at the dishwashers drain area, including the sump for any obstructions. If you find any debris clear it out.

4. Check the Drain Hose; Ensure that the drain hose isn’t twisted, kinked or blocked in any way. It’s crucial to have a flowing drain hose for drainage.

5. Run a Cycle; Run a cycle with a dishwasher cleaner to clean the interior and get rid of any remaining residue.

frigidaire dishwasher problem solving

2. Dishwasher Leaking Water

A. examining door seals and gaskets.

Dealing with water leakage from your dishwasher can be quite frustrating. If left unresolved it has the potential to cause damage, to your kitchen floor and cabinetry.

Here are some frigidaire gallery dishwasher troubleshooting steps can take for this issue;

1.Check the door seals and gaskets for any signs of wear, tears or damage. If you notice any issues make sure to replace them

2. Clean the door seals using a detergent and a soft brush to remove any dirt or debris that could affect their effectiveness.

3. Ensure that the dishwasher door closes properly and securely. If it seems misaligned it might lead to leaks.

4. Double check, for any objects obstructing the doors closure. Sometimes dishes in the place can prevent a seal.

5. Take a look at the edges of the dishwasher tub for any damage. Warping that could hinder a proper seal. In case of issues consider replacing the tub.

B. Inspecting the Tub and Hoses

If everything seems fine with your door seals and gaskets lets move on to frigidaire gallery dishwasher troubleshooting

1.Carefully examine the interior of your dishwasher tub, for cracks or damage as even small ones can cause leaks. Replace the tub if necessary.

2. Check all hoses connected to your dishwasher for signs of damage or loose connections. Replace them as needed.

3. To determine the cause of water leakage it is important to assess the drain pump. During its operation carefully examine the drain pump, for any signs of damage or leaks.

Additionally, addressing issues with the door seal and tub as inspecting hoses and the drain pump can assist in identifying and resolving these problems.

If you continue to experience issues or notice noises while operating the appliance please proceed to the section, for further frigidaire gallery dishwasher troubleshooting steps.

3. Unusual Noises During Operation

A. identifying noise types.

Hearing sounds coming from your dishwasher can be quite unsettling. It’s important to identify the type of noise as it can provide clues.

For frigidaire gallery dishwasher troubleshooting. Here are some common noises that dishwashers make and their potential causes;

1. Grinding or Crunching Noises; When you hear these sounds it often means that there are objects like broken glass or utensils stuck in the dishwasher’s pump or spray arms.

2. Buzzing or Humming Noises; If you notice these noises they may indicate a problem with the motor or pump. It could also be caused by debris trapped in the impeller.

3. Squealing or Whining Noises; When you hear pitched sounds like these it might suggest that the motor bearings have worn out and need to be replaced.

4. Clicking or Rattling Noises; During a wash cycle, dishes or secured utensils, inside the dishwasher can create clicking or rattling sounds.

Understanding these types of noises can help you troubleshoot any issues with your dishwasher effectively.

B. Troubleshooting Motor and Pump Problems

If you’ve noticed any sounds coming from your dishwasher while its running here are some steps you can take to troubleshoot and fix the problem;

1. Check for Foreign Objects; Turn off the dishwasher and carefully inspect the inside paying attention to the pump area and spray arms. Remove any debris or objects that may be causing a blockage.

2. Examine the Impeller; If you continue to hear buzzing or humming noises examine the impeller for any obstructions. You might have to disassemble the pump in order to access it properly.

3. Inspect Motor Bearings; If you hear squealing or whining sounds there’s a possibility that the motor bearings are worn out. In cases its recommended to replace the motor assembly.

4. Secure Dishes and Utensils; If you experience clicking or rattling noises make sure all your dishes and utensils are securely placed in their slots, within the dishwasher racks.

5. Check Dish Rack and Spray Arms; Loose or damaged dish racks as spray arms can also contribute to unusual noises. Tighten them up. Replace them if necessary.

6. Run a Cycle; Once you’ve addressed the issue run a cycle without any dishes, in it to ensure that the noise has been resolved.

By identifying which type of noise is occurring and following these troubleshooting steps accordingly you’ll be able to enjoy a quieter and dishwasher experience.

4. Dishwasher Won’t Start

A. checking power supply.

When your dishwasher refuses to start it can be quite frustrating. Let’s go through a troubleshooting process step, by step;

1. Confirm Power Supply; Make sure that the dishwasher is properly plugged into the outlet. If its connected directly check the circuit breaker to ensure that power is reaching the dishwasher.

2. Inspect Control Panels and Buttons; Take a look, at the control panel for any damage or buttons that may not be working correctly. Sometimes a faulty control panel can prevent the dishwasher from starting.

3. Check Door Latch and Interlock Switch; A malfunctioning door latch or interlock switch can also be the reason why your dishwasher won’t start. Ensure that the door closes securely and that the latch engages properly.

4. Resetting the Dishwasher; Try resetting the dishwasher by turning off its power at the circuit breaker for a minute turning it back on again. This simple step often resolves issues.

5. Look for Error Codes; Some dishwasher models display error codes when theres a problem. Consult your user manual to interpret any error codes you see.

6. Test Power Outlet; If your dishwasher is plugged into an outlet check if it works properly by testing it with another appliance.

These steps should help you troubleshoot and hopefully resolve any issues preventing your dishwasher from starting. For detailed guide do visit Troubleshooting Frigidaire Dishwasher Not Starting

5. Dishwasher Not Draining

A. clearing clogs in the drain hose.

If your dishwasher is not draining properly it can result in water at the bottom causing smells and possible damage.

Follow these frigidaire gallery dishwasher troubleshooting steps and resolve the problem;

1. Find the drain hose; Locate the hose that connects your dishwasher to either the sinks drain or garbage disposal.

2. Check for blockages; Inspect the drain hose, for any clogs or bends and remove any obstructions that you find.

3. The air gap; If your dishwasher is connected to an air gap examine it for any blockages. Clear away any debris.

4. Examine the drain pump; Sometimes the drain pump can get clogged or obstructed. Access the pump. Remove any debris or foreign objects that may be causing issues.

5. Inspect the connection to the garbage disposal; If your dishwasher drains into a garbage disposal make sure that there are no obstructions in the connection.

6. Test the drainage function; After addressing blockages run a cycle to test if your dishwasher drains properly.

Frigidaire Gallery Dishwasher Not Draining? 10 Fixes

6. Dishwasher Not Dispensing Detergent

A. checking the detergent dispenser mechanism.

If your dishwasher isn’t properly releasing detergent it can result in dishes after a wash cycle.

Follow these steps to troubleshoot and resolve this problem;

1. Check the compartment; Open the dishwasher door and inspect the compartment where you put the detergent. Make sure it is clean and free, from any residue or blockages.

2. Verify detergent type and amount; Ensure that you are using the type of detergent recommended for your dishwasher. Refer to the user manual for guidance. Also avoid overfilling the compartment as it can cause issues.

3. Examine the mechanism for dispensing detergent; Some dishwashers have a dispenser that may get stuck or stop working over time. Take a look at this mechanism. Clean it thoroughly to ensure smooth operation.

4. Test detergent release; Run a test cycle without any detergent in the compartment to see if water is released correctly. If not, you may need to replace the dispenser.

5. Inspect the water inlet valve; If there is no water being dispensed due to a lack of water examine the water inlet valve, for any clogs or faults that might be preventing water from entering your dishwasher.

By addressing these concerns related to detergent dispensing you can ensure that your dishwasher effectively cleans your dishes.

7. Overcoming Hard Water Issues

A. understanding the impact of hard water.

Dealing with water is crucial, for maintaining your dishwasher’s performance. Here are some tips to help you tackle the challenges associated with mineral content;

1. Detect the Indications; Keep an eye out for signs of water like white spots on glassware mineral deposits on heating elements and a chalky residue on dishes.

2. Impact on Dishwasher; Hard water can hamper the effectiveness of detergents resulting in cleaning performance. It can also cause scale build-up in components of your dishwasher.

3. Consider Water Softeners; Installing a water softener for your homes water supply can be beneficial. These devices remove the minerals for hardness ultimately improving your dishwasher’s efficiency.

4. Embrace Rinse Aids; Regularly using rinse aids can help prevent mineral deposits from forming on your dishes and glassware. This will enhance drying. Reduce spotting.

5. Don’t Forget Descaling; Periodically running a dishwasher cleaner or descaling agent will effectively eliminate any mineral build-up, inside the dishwasher and its components.

By following these frigidaire gallery dishwasher troubleshooting guidelines you’ll be able to combat the effects of water and maintain performance from your dishwasher.

B. Environmentally Friendly Detergents

If you’re worried, about how regular dishwasher detergents affect the environment you might want to consider using eco alternatives;

1. Biodegradable Detergents; Look for dishwasher detergents that’re biodegradable as they are less harmful to the environment.

2. Phosphate Free Detergents; Detergents containing phosphates can contribute to water pollution. Choose options that’re phosphate free to minimize their impact on the environment.

3. Detergents with Ingredients; Some detergents contain ingredients that are both safe for the environment and effective, at cleaning dishes.

By addressing issues related to water and choosing friendly detergents you can ensure your dishwasher performs well while staying committed to sustainability.

8. Addressing Rust and Stains

A. preventing rust formation.

Rust can be an issue, in dishwashers causing stains and potentially damaging the appliance. Here’s how you can prevent rust from forming;

1. Choose Stainless Steel Dishes; Opt for dishes and utensils made of steel as they are less prone to rust compared to materials.

2. Clean Off Food Residue; Make sure to clean off any food residue from the dishes before loading them into the dishwasher. Food particles can speed up the formation of rust.

3. Check Rack Coating; Inspect the coating on your dishwashers’ racks, for any signs of damage or wear. If you notice any exposed metal apply a rack repair coating to prevent rust.

4. Maintenance; Regularly inspect your dishwasher for any signs of rust. Address them promptly to prevent further corrosion.

B. Removing Rust and Stains

If you notice any rust or stains, in your dishwasher here are some steps you can take to address the issue;

1. Consider using rust removers specifically designed for dishwashers. Follow the instructions provided by the manufacturer to ensure effective use.

2. For an approach take a lemon. Cut it in half. Sprinkle some salt on the area. Gently rub it. The citric acid present in lemons can help dissolve rust stains.

3. Create a paste by mixing baking soda with water. Apply this paste to the rust stains allow it to sit for a while and then gently scrub with a brush.

4. Prepare a solution by mixing equal parts vinegar and water. Use this mixture to wipe down any surfaces that have been stained with rust. The acidic properties of vinegar can aid in breaking down rust.

By taking these steps you can prevent rust formation. Effectively remove any existing stains from your dishwasher ensuring that it remains clean and free, from rust.

frigidaire dishwasher problem solving

9. Error Codes and Diagnostic Mode

A. decoding error codes.

Modern dishwashers often utilize error codes to assist users in diagnosing and resolving problems. Here’s a guide, on how to interpret these error codes and take the actions;

1. Consult the User Manual; Make sure to refer to your dishwasher’s user manual for a list of error codes and their corresponding meanings. This information is crucial for troubleshooting.

2. Take Note of the Error Code; Whenever an error code is displayed it’s important to jot it down exactly as shown. This code will serve as a key in identifying the issue.

3. Restart the Dishwasher; In cases error codes may appear due to malfunctions or glitches. Attempt restarting the dishwasher to see if the error resolves itself.

4. Address Common Error Codes; Some error codes tend to have causes associated with them. For instance, an E1 error could indicate a problem with water inlet issues. Take a moment to inspect for any water supply problems or clogged filters.

5. Check for Obstructions; examine all components and connections within the dishwasher for any obstructions or damage that might be indicated by the given error code.

6. Clearing Error Codes; Once you’ve addressed and resolved the identified issue, its important to follow your user manuals instructions on how to clear out any remaining error codes or simply unplug and wait for a minutes before plugging it in.

By following these steps you’ll be able to decode dishwasher error codes and act, towards resolving any encountered problems.

B. Accessing Diagnostic Mode

Many dishwashers offer a mode that allows users to test components and functions. Here’s how you can access the mode;

1. Consult the User Manual; Take a look, at your dishwasher’s user manual for instructions on how to access the mode tailored to your dishwasher model.

2. Follow Common Activation Steps; For dishwashers you can activate the mode by pressing a specific sequence of buttons on the control panel. Refer to your manual for the button sequence.

3. Conduct Component Tests; Once you’re in the mode you’ll be able to run tests on dishwasher components, like the heating element, pump and sensors to identify any potential issues.

4. Observe Error Codes; Pay attention to any error codes or diagnostic results displayed during these tests. These codes serve as indicators that guide troubleshooting and necessary repairs.

By deciphering error codes and utilizing the mode you’ll be able to pinpoint and resolve any problems with your dishwasher more accurately.

Regular Maintenance

A. cleaning the interior.

Regularly maintaining your dishwasher is crucial to ensure its operation and prolong its lifespan. Here are some steps you can take to keep the interior of your dishwasher in condition;

1. Clean the filters on a basis. This will prevent any debris from accumulating and ensure that water circulates efficiently.

2. Clean the spray arms making sure there are no obstructions that could affect their performance.

3. After each use wipe down the interior of the dishwasher including the door gasket and edges to remove any food particles or residue.

4. Periodically check for any worn-out parts , in your dishwasher. If you find any tighten them. Replace them as necessary.

5. Every now and then run a cycle with a dishwasher cleaner to eliminate any lingering odors or build-up inside.

6. Take a look at the door gasket and seals for signs of wear or damage replacing them if needed to prevent leaks.

7. Lastly don’t forget to keep the exterior of your dishwasher clean! Pay attention to areas like the control panel and door to maintain its appearance.

By following these maintenance steps you can ensure that your dishwasher functions optimally, for a time while also keeping it looking its best on the outside.

It is essential to perform maintenance, on your dishwasher to ensure it functions correctly and minimize the risk of repairs. If you are unsure, about how to handle maintenance tasks or have tried troubleshooting without success it is advisable to reach out to customer support or professional service providers as mentioned in the following section.

When to Seek Professional Help

While there are instances where you can troubleshoot and fix dishwasher problems on your own there are situations where its best to seek professional help;

1. Complex Repairs; If the issue involves mechanical components it’s advisable to leave it to trained technicians who have the necessary expertise.

2. Safety Concerns; If you come across any safety concerns, during troubleshooting, such as exposed wires or gas leaks it’s important to disconnect the power and reach out to professionals for assistance.

3. Warranty Coverage; If your dishwasher is still under warranty attempting DIY repairs could potentially void the warranty. In cases its recommended to contact customer support or the manufacturer for repairs covered by the warranty.

4. Issues; If you’ve followed all troubleshooting steps and the problem persists its time to consult professionals who possess tools and knowledge for diagnosis and repair.

5. Gathering Information; Before reaching out to customer support or a service technician gather information, about your dishwasher including its model number, warranty status. Provide a detailed description of the problem.

In these situations, mentioned above seeking assistance is often the course of action.

People Also Ask

What is the most common problem with the frigidaire dishwasher.

One common issue that often arises with Frigidaire dishwashers is that they don’t clean dishes enough. This can be due, to either the spray arms getting clogged or the water temperature during the wash cycle not being sufficient.

How do you reset a Frigidaire Gallery dishwasher?

If you need to reset a Frigidaire Gallery dishwasher here’s what you can do; Simply press the “Start/Cancel” button, on the control panel of the dishwasher. Afterward give it about 20 seconds to reset itself. Once thats done you can proceed to start a wash cycle like you normally would.

How do I put my Frigidaire Gallery dishwasher in diagnostic mode?

To activate the mode, on your Frigidaire Gallery dishwasher follow these steps. Press the buttons labeled “Temp” and “Start/Cancel” on the control panel of the dishwasher in order. Once you’ve done that all you need to do is close the dishwasher door. This will start the mode allowing you to troubleshoot and identify any problems.

What is the reason why Frigidaire dishwasher won’t drain?

When a Frigidaire dishwasher fails to drain there could be reasons behind it. Some common causes include blocked drain hoses, a malfunctioning drain pump or issues with air gaps and connections, to garbage disposals. To find out why its not draining properly thoroughly inspect these components.

In this guide, on how to troubleshoot your Frigidaire Gallery Dishwasher we have covered a range of common problems that could potentially affect its performance. We have provided solutions for issues like cleaning difficulties, water leakage, unusual noises and start-up glitches. Our focus has been on promoting maintenance and proactive troubleshooting to help you extend the lifespan and enhance the efficiency of your dishwasher. However, for safety related concerns it is advisable to seek professional assistance. It’s also important to understand your warranty coverage as it can offer peace of mind and potential cost savings. With this information, at your disposal you can confidently. Enjoy the benefits of using your dishwasher for many years ahead.

Frigidaire Dishwasher Not Starting Lights Blinking – 7 Fixes

KitchenAid Dishwasher Touchpad Not Working Solutions

Leave a Comment Cancel reply

Save my name, email, and website in this browser for the next time I comment.

frigidaire dishwasher problem solving

  • Account Settings

Home Services

  • Home Security
  • Pest Control
  • Living Room
  • Other Rooms

Home Improvement

  • Cost Guides
  • Floor Plans

Housekeeping

  • Cleaning Tips
  • Organization
  • Popular Brands
  • Sizes & Dimensions

Smart Living

  • Dangerous Areas
  • Safest Areas
  • Most Affordable Areas

Top stories

Do You Tip On White Glove Delivery?

  • Manufacturers

28 Common Frigidaire Dishwasher Error Codes Explained

Stacy Randall

Just like the rest of our technology, dishwashers have become “smarter” in recent years. The newest models are full of sensors that can tell us exactly what part of their complicated mechanism needs attention. So once you’ve identified the problem, what do you do next?

There are 28 common dishwasher codes for the Frigidaire including:

  • i20, 140 or iFo
  • i50, i60, iCo

The steps you take next will be dependent upon the code that your dishwasher is showing.

When error codes pop up on dishwashers, it can be extremely frustrating and stressful. But, this article will explain the 28 most common ones for Frigidaire dishwashers so you can fix the issue as soon as it pops up. Let’s get started!

Do You Need Appliance Repair Services?

Get free, zero-commitment quotes from pro contractors near you.

frigidaire dishwasher problem solving

What Are The Error Codes For Frigidaire Dishwashers?

Sometimes things go wrong, and your dishwasher is trying to communicate a problem. Reading these codes can be like speaking a different language. Here’s a list of Frigidaire dishwasher error codes and how to resolve them.

HO- Heat Delay Or Low Water Temperature

This error code signifies a heat delay or low water temperature. This simply means you’ll have a delayed cycle start until the water temperature rises. The dishwasher should be able to do it on its own in a short period of time.

This code is relatively common, especially if you have a small or older-model water heater. If you see this light consistently, try running the hot water in your sink before running your dishwasher. This will flush any cold water sitting in your pipes and allow the hot water to enter more quickly.

LO- Rinse Aid Is Low

In this case, the rinse aid is low. You can efficiently resolve this code by refilling the rinse aid dispenser. Rinse aid is a surfactant that prevents water from forming into droplets.

As the water is encouraged to stream away instead of pooling, your dishes will emerge from the dishwasher spot-free.

PF- Power Failure

This error code stands for power failure and is one of the most common dishwasher error codes. There could have been a power flicker, power outage, or tripped breaker. You can often resolve this code by opening and closing the dishwasher door to reset the cycle.

If this code occurs frequently, check the dishwasher’s voltage power to ensure it’s consistent and appropriate for this appliance.

i10- Low Fill Has Been Detected

This error code means that a low fill has been detected. There is not enough water in the dishwasher. Make sure the water supply line is not pinched or kinked up in any way. Ensure that your water shutoff valve is all the way open.

i20, i40, or iFo- Clogged Filters

These codes can mean that filters are clogged, or a restricted drain line has been detected. To resolve it, try cleaning the filters and the sump area. Check for a pinched or blocked drain hose.

Does the drain line connect to a disposal? Make sure that you have removed the knockout plug, and contents can flow freely.

i30- Overflow Of Water

If this error code pops up, there is a leak or overflow of water in the bottom pan. To resolve the issue, check to see if there’s a loose connection at the water inlet valve that’s allowing water to leak out. Ensure that the dishwasher is appropriately leveled to prevent pooling .

i50, i60, and iCo- Unit Needs Restarting

These three codes have different meanings but the same recommended solution.

  • Error code i50: A problem has been detected with the drain or wash motor.
  • Code i60: This means a problem has been detected with the water heating system.
  • Error code iC0: Implies that there’s an issue with the electronic control system.

Unfortunately, these are not necessarily problems that you, as the user, can problem-solve yourself. To clear the error code and restart the unit, press and hold the cancel button.

Alternatively, turn the power off at the breaker for five minutes. If this doesn’t resolve the problem, you’ll need to call a professional to service the unit.

UO- Vent Is Open

This dishwasher error code indicates that the vent is open. If this code appears, check the vent assembly to make sure nothing is blocking the vent. You can also check the wiring to make sure everything is intact.

UF- Vent Fan Failed

If you see this code, the dishwasher is signaling that the vent fan has failed or is not running. To troubleshoot, check the vent fan assembly and wiring. You may need to replace the vent fan, which costs around $50 (not including labor if you use a professional).

ER- Membrane Switch Failure

No, this code does not mean that you need to take your dishwasher to the emergency room. It signifies a membrane switch failure or a stuck key.

This can occur if a button on the control panel is malfunctioning. To resolve, check the wiring connections between the main control panel and the keypad.

CE- Configuration Error

This error code means that your dishwasher is experiencing a configuration error. Similar to the ER code, problem-solve this code by checking the connections between the main control panel and the keypad.

CL- Door Is Open

This code is one of the most common: it means that the door is open. Try opening and closing the door again, making sure it latches fully. You should hear a click; make sure there’s nothing in the way of the door.

If the door doesn’t close properly, check to make sure that nothing is blocking the latch. If you continue to see this error message, check the door switches to ensure they’re not broken or damaged.

You can also check the wiring between the door switches and the main control board to ensure proper connections.

dP- Drain Pump Issues

This error code relates to the drain pump. It will show up during relay tests when the drain pump is activated.

FL- Open Water Valve

No, your dishwasher isn’t on vacation in Florida. This code indicates that the water valve is open. It’s displayed during a relay test when the water valve is activated.

HS- Hall Sensor

This dishwasher error code is known as a hall sensor error, and it relates to the motor. To troubleshoot, check the wiring between the motor and the main control board. If you can’t resolve the error, it may be time to replace the motor.

RA- Rinse Aid Switch Failure

Unlike the RA that lived on your floor in college, this one won’t reprimand you for having a few beers. This code indicates a rinse aid reed switch failure.

First, try refilling the rinse aid dispenser to see if that clears the code. If not, check the wiring between the main control board and the dispenser. If all else fails, you may need to replace the dispenser assembly.

RE and RF- Rinse Aid Reed Switch

Both of these codes refer to the rinse aid reed switch. The RE code indicates a closed switch in the dispenser.

The RF code tells you that the reed switch is open. Try refilling the rinse aid dispenser to clear this code. If that doesn’t work, you may need to replace the dispenser assembly.

RT- Relay Test

Your dishwasher just retweeted your last message! Just kidding. It’s referencing the relay/Triac test, telling you that the relay test has been activated.

SD- Detergent Dispenser Error

This error code refers to the detergent dispenser. It will display in relay test mode when the dispenser has been activated.

TU- Turbidity Sensor Failure

The TU error code indicates a turbidity sensor failure. You’ll need to check the wiring between this sensor and the main control board. As a last resort, you may need to replace the turbidity sensor.

User Instruction Codes for Frigidaire Dishwashers

Sometimes your Frigidaire dishwasher will show you a code that’s simply an instruction or piece of pertinent information. This information is not an error message. Here are some standard user instruction codes.

LOC- Door Is Locked

This code shows you that the door is locked. A locked door is necessary for the cycle to start and may remain locked for a moment after the cycle has finished.

L0-L6- Level Of Rinse Aid

This number indicates the level of rinse aid that your machine will disperse. Use L0 for less and L6 for more rinse aid, or anything in between based on your preferences.

Can I Fix An Error Code Myself?

Once you’ve located the cause of your error code, you can do some basic investigating. If you find a clear issue (like a clog in a drain) that you can resolve yourself, congratulations! Your dishwasher will be back in working order in no time.

However, not all problems are easy for homeowners to see or fix. If the error code you’re seeing involves electrical wiring, detailed plumbing, or another unfamiliar trade, call a pro. The cost of an appliance repair call may be inconvenient, but it’s worth it to have the dishwasher repaired safely.

Related Guide

Frigidaire dishwasher high temp and heat dry lights flashing.

  • Frigidaire Dishwasher Start Button Not Working?
  • Frigidaire Dishwasher Not Draining? (Possible Causes & Fixes)

Stacy Randall

Stacy Randall is a wife, mother, and freelance writer from NOLA that has always had a love for DIY projects, home organization, and making spaces beautiful. Together with her husband, she has been spending the last several years lovingly renovating her grandparent's former home, making it their own and learning a lot about life along the way.

More by Stacy Randall

Seven Great Ways To Make Coffee Without A Coffee Maker

Seven Great Ways To Make Coffee Without A Coffee Maker

Popular articles.

Common Plants That Can Cause Allergic Reactions

Common Plants That Can Cause Allergic Reactions

Can The HOA Come To My Property?

Can The HOA Come To My Property?

How To Fix Salt Damage On Concrete

How To Fix Salt Damage On Concrete

Do Dog Doors Decrease Home Value?

Do Dog Doors Decrease Home Value?

How to Protect Your Plants From Cats

How to Protect Your Plants From Cats

You may also be interested in.

Frigidaire Dishwasher Not Draining? (Possible Causes & Fixes)

Frigidaire Dishwasher Not Draining? (Possible Causes & Fixes)

Frigidaire Dishwasher High Temp And Heat Dry Lights Flashing?

Frigidaire Dishwasher Start Button Not Working? (Fix It Now!)

Frigidaire Gallery Dishwasher Leaking? (Possible Causes & Fixes)

Frigidaire Gallery Dishwasher Leaking? (Possible Causes & Fixes)

Tamper-Resistant Outlet Can't Plug-In: Possible Solutions

Tamper-Resistant Outlet Can't Plug-In: Possible Solutions

Samsung Washing Machine Error Codes (Ultimate Guide)

Samsung Washing Machine Error Codes (Ultimate Guide)

Master Bedroom Dimensions & Layout Guidelines (with Photos)

Master Bedroom Dimensions & Layout Guidelines (with Photos)

How Much Is A Water Heater Worth In Scrap Metal?

How Much Is A Water Heater Worth In Scrap Metal?

Can You Use Cement That Has Hardened In The Bag?

Can You Use Cement That Has Hardened In The Bag?

How To Bypass The Lid Lock On My Washing Machine (Do This!)

How To Bypass The Lid Lock On My Washing Machine (Do This!)

Heating Pad Flashing A Red Light While On High? (Do This!)

Heating Pad Flashing A Red Light While On High? (Do This!)

Main Parts of a Furnace (with Diagram)

Main Parts of a Furnace (with Diagram)

Maytag Washer Violently Shaking During Spin Cycle? (Fix It Now!)

Maytag Washer Violently Shaking During Spin Cycle? (Fix It Now!)

Nest Says It's Heating But It's Not? (Possible Causes & Fixes)

Nest Says It's Heating But It's Not? (Possible Causes & Fixes)

What Is The Best Lubricant for Electric Fan Motors?

What Is The Best Lubricant for Electric Fan Motors?

Walk-In Pantry Dimensions & Layout Guide (with Photos)

Walk-In Pantry Dimensions & Layout Guide (with Photos)

How To Stop Water Coming In Under A Door Threshold

How To Stop Water Coming In Under A Door Threshold

10 Places That Will Cut Wood For You (Free and Paid)

10 Places That Will Cut Wood For You (Free and Paid)

Machine Answered

Frigidaire Dishwasher Troubleshooting Manual (4 Problems Fixed!)

Nothing suck than a Frigidaire dishwasher model that won’t work when you need it the most. However, running a Frigidaire dishwasher troubleshooting manual can help you fix most, if not all, the problems right from the comfort of your home.

The most common Frigidaire dishwasher problems include failure to finish a wash cycle, inability to drain, power supply issues, water supply problems, and incorrect dishwasher settings. A faulty drain solenoid valve and water pooling are other issues you may have to deal with.

In this guide, I’ll look at each of these problems and explain exactly why they occur and what you can do to fix them from home.

Frigidaire Dishwasher Troubleshooting

Frigidaire Dishwasher Troubleshooting Manual (4 Common Issues & Relevant Fixes)

The table below is a summary of the most common Frigidaire dishwasher problems as well as how to fix them:

Let’s discuss these issues in more details to give you more troubleshooting insights.

1. Frigidaire Dishwasher Won’t Start

The following are reasons why your Frigidaire dishwasher won’t start as well as how to fix each error to get the unit to start working again:

(a) Power Supply Issue

Frigidaire dishwasher will not start if not connected to a power source. Therefore, this is the first check you need to consider before looking for any other problem.

To solve this issue, just make sure you have the dishwasher properly plugged into a power source. Do not tap power from an extension cord to the dishwasher because most extensions cannot accommodate the required voltage.

Check below the sink if necessary to ensure the socket supplying power to the Frigidaire dishwasher is ON. In addition, confirm that the dishwasher’s circuit breaker is in the right position.

(b) Water Supply Problem

The dishwasher might be getting power but still not working. In such a case, the possible problem might be the water supply.

Check the water supply valve, the water inlet hoses, and the water pressure

Make sure the water supply valve is ON. If faulty, get the Edgewater Dishwasher inlet valve for replacement.

Edgewater Parts 154637401 dishwasher valve

Ensure the hose is in good condition, that it doesn’t have signs of damage or kinking. If there are kinks or damages on the hose, replace it.

Lastly, using a water pressure gauge , check for water pressure and make sure the reading is nothing below 30psi. To improve water pressure, do not run water on your washing machine, sink or shower.

(c) Incorrect Dishwasher Settings

Frigidaire dishwasher will not work if you are running an incorrect cycle. It will also boycott doing your dishes if you don’t have a wash cycle selected.

To avoid such an inconvenience:

  • Make sure you have selected a cycle and then press start.
  • Make sure the control panel doesn’t get wet because it might cause miscommunication in the dishwasher.

(d) Door Latch Problem

The door latch prevents water from leaking from the dishwasher, and the machine will therefore not start if there’s a problem with the door latch.

So, make sure the door latch properly closes if not you will need to have it replaced.

2. Frigidaire Dishwasher Not Finishing a Cycle

Frigidaire dishwasher can malfunction in the middle of a cycle and the possible explanation might be:

(a) The Door Latch is Loose

You already know by now that an improperly closed door is one of the reasons why a Frigidaire dishwasher won’t start .

But what if the dishwasher starts and then fails to finish a cycle? Well, there’s a high chance the door latch went loose.

I suggest that you tighten the door. However, if tightening the door latch doesn’t get the unit to work, you may have to replace the door latch altogether.

You can get a door latch kit compatible with your dishwasher model and do the replacement on your own, right from the comfort of your home.

Frigidaire 5304516818 Dishwasher Door Latch

(b) Shorting from Thermal Fuse

Your Frigidaire dishwasher might fail to finish a wash cycle because its thermal fuse is dirty, fouled, loosely attached, or broken.

The main function of a thermal fuse is to stop the kitchen appliance when it gets too hot. Since the fuse is shorting out, it will be hard to register the correct water temperatures.

Use a multimeter to gauge the thermal fuse. Replace the thermal fuse if the reading on multimeter show infinity.

(c) Shorting from the Main Control Board

Although rare, the Frigidaire dishwasher’s main control board can damage and begin to short out and stop the dishwater in the middle of a wash cycle.

In case the control board is causing of the problem, consider inspecting the board to find out what could be the issue. For example, there might be loose connection that needs adjustments, and these are usually an easy fix.

If the main control board is faulty, replace it. Ensure you buy a Frigidaire dishwasher specific control board , making sure the option you pick blends well in your model.

The timer ensures the dishwasher turns on and then runs a wash cycle the right way. However, the unit will stop in the middle of a cycle if the timer is inaccurate.

Having the current defective timer replaced is the right thing to do.

3. Frigidaire Dishwasher not Draining

You will need to fix the drainage issue as quickly as possible the moment you realize it because the more the water stays in the unit, the more likely an odor will dominate your kitchen.

Here are the reasons why the dishwasher isn’t draining as well as how you can fix the problem fast: 

(a) Blocked Garbage Disposal

Make sure you remove the drainage knockout plug when installing the garbage disposal or the dishwasher won’t drain water very well.

Often check the garbage disposal for debris that could cause drainage issues.

(b) Blocked Drain Hose

The most likely reason why your Frigidaire dishwasher isn’t draining is a blocked drain hose. In other words, there may be large food particles stuck in the cause, causing improper drainage.

A kink on the hose might also be a reason why the dishwasher isn’t draining. So, frequently check the hose for kinks.

To unblock the drain hose:

  • Disconnect the drain hose from the sink pipe
  • Put one end of the hose into the bucket and run water into it.

The blockage will blow out into the bucket. The dishwasher is now free and can now drain used water. 

(c) Pump Belt

The pump belt will be unable to drain used water from the Frigidaire dishwasher if comes off – or if it slips.

Remove the access panel located beneath the dishwasher to access the pump belt and troubleshoot using the blocked drain hose instructions above.

(d) Blocked Filter or Glass Trap

Frigidaire dishwashers come with filters or glass traps that can fill with food debris, causing the drainage not to work.

You will need to retrieve the filter from the dishwasher and clean it. To retrieve the filter remove the dishwasher rack, silverware basket, and spray arm.

Use baking soda or vinegar with a sponge or a soft brush to clean the filter. Consider replacing the damaged glass trap or filter with a new one to prevent further damage to the motor seals and pump.

(e) Defective Drainage Pump

A defective drainage pump might be another very reason why your Frigidaire isn’t draining. More often than not, the pump becomes defective because of a faulty motor.

The damage to the drain pump’s motor can be electrical or mechanical. Often, replacing the impeller is the best thing to do to fix the damage.

Frigidaire 154844301 Motor Kit

You can use the multimeter to test the impeller. If the continuity test turns out negative, you have a damaged motor, which needs a replacement.  

4. Frigidaire Dishwasher Water Pooling in the Bottom

The first and the most important thing is switching off the dishwasher and removing the plug from the socket to get rid of the water inside the dishwasher.

  • Examine the drainage system and remove any debris that could create a blockage. Using a soft bristle brush and water clean the filter and spray arm.
  • If the water remains stagnant, consider assessing the supply line. Have a bucket when opening the supply line to hold the water that pours.
  • Watch out for clogs as the water runs into the bucket. Reattach the line and run an empty cycle. If nothing seems to work, consider running the garbage disposal, straightening the drain hose, or the drain line.

Now plug the dishwasher back into the power source, turn it on, and run a complete dishwashing cycle to ensure the dishwasher is draining wastewater properly.

Open the door latch to see whether the water still pools.

Frequently Asked Questions

1. how i reset a frigidaire dishwasher.

One the far right of the Frigidaire dishwasher is a cancel button that you can use to reset the unit. Press and hold down the button for about three seconds. ( Belbien )

Another option is to disconnect the unit from the power and turn it back on after 5 seconds.

2. Why is My Frigidaire Dishwasher Start Button Blinking?

The start button of your Frigidaire dishwasher is blinking because the door is open. Other common cause include a faulty door latch, an issue with the control panel, and malfunctioning heating element.

3. Why is y Frigidaire Dishwasher Not Washing?

Your Frigidaire dishwasher isn’t washing because there’s a problem with the water inlet valve.

A water inlet valve is important because it allows water to get into the dishwasher tub several times when the unit is in use. If clogged with deposits or becomes defective, the dishwasher fails to get enough water to clean the dishes thoroughly.

I hope this Frigidaire dishwasher troubleshooting guide has helped you to figure out what problem your unit has and enabled you to fix the issue.

Thanks for stopping by Frigidaire

<p>to help you make the most of your time with us, begin by choosing your preferred site.</p>.

English / French

Refrigerators

  • Refrigerators
  • French-Door
  • Single-Door
  • Side-by-Side
  • Top-Freezer
  • Wine & Beverage
  • Bottom Freezer

Ranges & Stoves

  • Ranges & Stoves

Dishwashers

  • Dishwashers

Wall Ovens

  • Microwave Combination

Other Products

  • Ventilation

Washers

  • Laundry Centers
  • All Laundry Centers

Air Conditioners

  • Air Conditioners
  • Window Mounted Air Conditioners
  • Built-in Air Conditioners
  • Portable Air Conditioners

Dehumidifiers

  • Dehumidifiers

OTHER PRODUCTS

frigidaire dishwasher problem solving

  • Water Filters
  • Refrigerator Air Filters
  • Complete Care Bundles
  • Room Air Filters
  • Furnace & AC Filters
  • Microwave Filters
  • Ventilation Filters
  • Subscribe & Save
  • Genuine Water Filters

Cooking Accessories

  • Cooking Accessories
  • Oven Thermometers
  • Air Fry Trays
  • Replacement Parts
  • Installation Parts

Refrigerator Accessories

  • Refrigerator Accessories
  • Refrigeration Trim Kits
  • Bins, Shelves & Trays

Dishwasher Accessories

  • Dishwasher Accessories
  • Dishwasher Installation Parts
  • Dishwasher Replacement Parts
  • Microwave Accessories
  • Microwave Trim Kits
  • Washer and Dryer Accessories
  • Air Conditioning Accessories
  • Freezer Accessories
  • Light Bulbs
  • Touch Up Paint

Owner Center

  • Appliance Guides & Manuals
  • Register for a chance to win $1000*
  • Login for a Personalized Experience
  • Owner Center Hub
  • Guides and Manuals by Product Type
  • FAQs and Troubleshooting
  • Service & Repair
  • Appliance Protection Plans
  • Certified Frigidaire Replacement Parts
  • Create an Account
  • Write a Review
  • Register Your Appliance
  • Resource Library
  • FAQs & How-Tos
  • Guides & Manuals by Product

Service & Maintenance

  • Extended Service Warranties
  • Warranty & Service Support
  • Recall Information
  • Mon-Fri, 8:30am - 8pm (EST)

Where is my model number?

Don't know your model number? Browse by product category

Browse Products

  • Kitchen Appliances
  • Laundry Appliances
  • Air Conditioner
  • Accessories

Other Support for Your Appliances

Register your product or buy replacement filters.

frigidaire dishwasher problem solving

  • Home Comfort
  • Small Appliances

frigidaire dishwasher problem solving

Frigidaire Dishwasher Not Draining

Frigidaire Dishwasher Not Draining .css-85r32f{transition-property:var(--chakra-transition-property-common);transition-duration:var(--chakra-transition-duration-fast);transition-timing-function:var(--chakra-transition-easing-ease-out);cursor:pointer;-webkit-text-decoration:none;text-decoration:none;outline:2px solid transparent;outline-offset:2px;color:inherit;display:-webkit-inline-box;display:-webkit-inline-flex;display:-ms-inline-flexbox;display:inline-flex;place-items:center start;padding-left:var(--chakra-space-2);min-width:var(--chakra-sizes-7);}.css-85r32f:hover,.css-85r32f[data-hover]{-webkit-text-decoration:underline;text-decoration:underline;}.css-85r32f:focus-visible,.css-85r32f[data-focus-visible]{box-shadow:var(--chakra-shadows-outline);} .css-oy56l9{display:-webkit-box;display:-webkit-flex;display:-ms-flexbox;display:flex;-webkit-align-items:center;-webkit-box-align:center;-ms-flex-align:center;align-items:center;height:55%;max-height:var(--chakra-sizes-4);color:var(--chakra-colors-gray-500);opacity:0;-webkit-transition:opacity 0.1s ease-in-out;transition:opacity 0.1s ease-in-out;}

Introduction.

While Frigidaire dishwashers are as prone to part failure as other devices, they also require regularly scheduled maintenance. Refer to your owner's manual and this troubleshooting guide to get your machine running.

Before replacing electrical components or hoses, consider disconnecting the electrical and draining the water supplies to the dishwasher. This will look like flipping the related breaker to the off position or removing its fuse, then locating the water supply for the dishwasher and closing the valve.

Dishwashing Tips

Your dishwasher was designed to run with a dishwasher-compatible soap, and will periodically need cleaning. Routine dishwasher cleaning will help keep dishes clean.

Incomplete wash cycle

Check to make sure the last wash cycle is completed properly—if your dishwasher has a “Clean” indicator light, it should be illuminated. If not, the wash cycle may have been interrupted. Close the door and press the Start button.

Garbage Disposal Incorrectly Installed

Try running the garbage disposal (if you have one) — it usually shares the same drain as the dishwasher, this can prevent the dishwasher from draining.

  • Flush with cold water for 20 seconds afterward to move debris down the drain.

If the dishwasher is hooked up to a new garbage disposal, verify that the disposal was installed properly and does not still have a knockout plug in the disposer's drain tube.

  • The plug is located right inside the nipple where the drain hose from the dishwasher attaches to the disposal. If it’s not removed, the dishwasher can’t drain properly.
  • If the plug has been removed, it's possible the disposer is clogged with debris. Clear out the drain tube from any obstructions.

Filters Clogged

A clogged filter will certainly cause issues with draining. Take the filter out of the bottom of the machine, usually done by twisting counter-clockwise and lifting out.

  • Clean thoroughly and put back, twisting clockwise to lock the filter back in place.

Clogged or Kinked Drain Hose

The drain hose transfers fluid from the bottom of your dishwasher to your garbage disposal or under the sink drain connection. Solid debris — food, hair, etc — can accumulate in the drain hose with time, but clogs normally form with broken plastic, stickers, or porcelain chips.

  • Check for a kink in the drain hose that runs from the bottom of your dishwasher to the drain pipe (usually below the sink). Make sure it’s not pinched or kinked. If necessary, replace it with a new hose.
  • Check for a clog. Remove the drain hose end from the nipple it's connected to below the sink or disposal, put the end in a bucket, then fill and drain the dishwasher to see if a garbage clog will simply blow out.
  • Remember, there's still water in the unit—so put a drain pan under it before removing the hose.
  • Remove the sump pump screen at the bottom of your dishwasher and remove any materials that shouldn't be there. This screen is usually held in by a couple of screws. Remove the coarse and fine filters and remove all foreign material.

Clogged Air Gap Fitting

After the drain hose leaves the bottom of the dishwasher the hose passes through a loop on the outside of the machine. The hose then travels to an air gap, check valve, or high loop under your sink before connecting to the garbage disposal or under the sink drain connector.

Air gaps are a plumbing standard in some locations and optional in others. Check local codes if you're unsure. Without an air gap, there is a small possibility to siphon sewage contaminants into your drinking water system.

  • Check your air gap fittings at the sink for any obstructions.

Defective Drain Solenoid Valve

Your machine may have a drain solenoid valve, which lets water drain.

  • If your motor has two or three wires, then it is a single direction motor. A motor with four wires is a reversing motor. If you have a reversing motor, you can skip this section because it will not apply to your dishwasher.
  • If the solenoid tests negative for continuity or nowhere near 40 Ohm, it will need to be replaced.

Malfunctioning Check Valve or Ball

If the check valve gets stuck in the closed position, water will not drain. The valve and ball are normally underneath the filters at the bottom of the machine.

  • Remove the lower rack, sprayer arm and filters.
  • Inspect and clean your check valve. It may need replacing if washer still will not drain. Some models use a check ball instead of a valve. This ball may be stuck, or need replacing.

The check valve may also be located underneath the dishwasher, just before the drain hose.

  • If the valve is located under your machine, grab a drain pan and remove the drain hose from the dishwasher.
  • Check to make sure the valve is clean and opens correctly.

Defective Drain or Circulation Pump

A new drain pump should only take a few minutes to remove all water from your dishwasher. Taking longer to remove the water or leaving standing water in the machine is a sign of a bad pump. Low humming or squealing noises also point to a pump problem. Pumps can fail both electrically and mechanically. Some models of dishwashers may have separate pumps to drain and circulate the water, so check both pumps. These pumps are normally on the bottom of your dishwasher.

If the dishwasher adds water, heats, and empties water, but the dishes are not clean then the circulation pump is likely the issue.

Let's listen to our dishwasher.

A loud buzzing noise indicates a blocked or dirty drain pump or wash pump.

  • Underneath the filter is a removable plastic cover over the impeller. This can be pried out using a blunt knife and then lifted out. Check if the propeller moves freely and is clean of debris. Replace the clip and filter.
  • If the pump is jammed, remove the blockage. You may have to replace the drain pump if there are no blockages.

A squealing or droning suggests a failing wash pump. Search for blockages to the pump, and replace the wash pump .

A scraping sound suggests a damaged impeller or impeller fin scraping against the pump housing. The impeller is inside of the pump and is what moves the water through the system. Replacing the impeller instead of the whole pump may be possible. Inspect the impeller. If it's broken, replace it .

A worn drain pump may also have a hole, crack, or worn bearings causing a leak. Replace the drain pump in this case.

If none of the above tones are evident, then disconnect the drain pump from the system, and test its continuity . If the measured impedance in Ohm (Ω) between terminals is 15-40Ω, your drain pump is likely fine.

If the pump just hums when it should be running, the entire pump assembly might need to be replaced.

How To Use A Multimeter

Every fixer should know their way around a multimeter , which has just north of a zillion uses for testing electronic components and circuits. Follow along to master the three most basic functions of a multimeter.

Part 1: Testing Continuity

Part 2: Measuring Voltage

Part 3: Measuring Resistance

To learn how to use your multimeter to make advanced measurements such as current and capacitance, check out this guide .

Worn Water Pump Belt

Very few dishwashers have a water pump belt, so verify if your model has one. If the belt is broken or worn, replace it.

Additional Resources

  • Error Codes for Frigidaire
  • Does not drain the water at the end of cycle
  • Dishwasher is draining slowly , and not completely draining
  • Should there be any standing water left in the sump?
  • How do I get an awful, rotten smell out of my dishwasher?

Related Problems

Garbage Disposal

Garbage Disposal

Dishwasher

13 common problems

View statistics:

Past 24 Hours:

Past 7 Days:

Past 30 Days:

IMAGES

  1. Frigidaire dishwasher won't start, here's how to fix it

    frigidaire dishwasher problem solving

  2. Frigidaire Professional Dishwasher Troubleshooting Guide

    frigidaire dishwasher problem solving

  3. Frigidaire Dishwasher Troubleshooting Manual

    frigidaire dishwasher problem solving

  4. Frigidaire dishwasher won't start, here's how to fix it

    frigidaire dishwasher problem solving

  5. How To Reset A Frigidaire Dishwasher

    frigidaire dishwasher problem solving

  6. Why My Frigidaire Dishwasher Not Draining? Learn How to Fix

    frigidaire dishwasher problem solving

VIDEO

  1. inside frigidaire dishwasher pt.1

  2. Frigidaire dishwasher noise

  3. Frigidaire Dishwasher

  4. Frigidaire dishwasher jingle

  5. Frigidaire GDSP4715AF Dishwasher Review

  6. (Honest Review) Frigidaire Dishwasher

COMMENTS

  1. Frigidaire Dishwasher Repair

    Genuine Frigidaire dishwasher parts with diagrams, manuals & videos. Orders ship same day. Appliance Parts Pros® has everything you need to fix and repair any Frigidaire appliance.

  2. Frigidaire Dishwasher Troubleshooting: Fix Common Problems

    Having a dishwasher malfunction can be frustrating, but often, the issues you encounter can be solved with some simple troubleshooting. This guide is designed to help you identify and resolve common problems with your dishwasher right at home. Whether you're dealing with a dishwasher that won't start, isn't cleaning properly, or has a leak, our ...

  3. Frigidaire Dishwashers Problems: 7 Common Issues (Must Read)

    Frigidaire dishwashers are high-quality and long-lasting, as are all Frigidaire appliances. Dishwashers, like all machines, are prone to malfunction, leaving you with an annoying feeling and a mountain of dirty dishes. Before you give up and start handwashing your dishes, read this article. Contents1 Frigidaire Dishwashers Problems: 7 Common Issues (Must Read)2 Frigidaire Dishwashers Any ...

  4. Frigidaire Dishwasher Troubleshooting & Repair

    Find the most common problems that can cause a Frigidaire Dishwasher not to work - and the parts & instructions to fix them. Free repair advice! En español. 1-800-269-2609 24/7. Track Order. ... Shop by Popular Frigidaire Dishwasher Models. DW1800Y0 DW4500FW1 DW5900PW1 F71C663BB0 F71C663BD0 F71C663BS0.

  5. Frigidaire Dishwasher Troubleshooting

    If you're looking for help fixing your Frigidaire Dishwasher, look no further! Our comprehensive Frigidaire Dishwasher Troubleshooting guide will explain com...

  6. Frigidaire Dishwasher Troubleshooting & Repair

    Find the most common problems that can cause a Frigidaire Dishwasher not to work - and the parts & instructions to fix them. Free repair advice! En español. 1-800-269-2609 24/7. Track Order. ... Related Videos for Frigidaire Dishwasher Model FFCD2413US2A. 02:34. Disassembly. Frigidaire Dishwasher Disassembly. View Solution. 03:11. Disassembly.

  7. What To Do If Your Dishwasher Is Not Cleaning

    Is your dishwasher leaving your dishes dirty or spotty? Watch this video from Frigidaire to learn some simple tips and tricks to improve your dishwasher's performance and get sparkling clean dishes every time. If you still need help, you can also contact Frigidaire's appliance repair service for professional assistance.

  8. A how-to guide: Troubleshoot your Frigidaire dishwasher

    First, make sure the dishwasher's water supply line is intact. Next, ensure there aren't any leaks, as evidenced by water on the floor after use. Also, confirm that you're using the correct wash cycle. With these basic points ticked off your troubleshooting list, check the water pressure and supply.

  9. 16 Most Common Frigidaire Dishwasher Error Codes Explained With Fixes

    I am a kitchen appliances expert with years of experience on my back, which motivated me to share insightful tips with people who face issues while cooking, defrosting, melting, or reheating their food.

  10. Frigidaire Dishwasher Troubleshooting, Manual & Repair Guide

    Chapter 6: Frigidaire Dishwasher Electrical problems. NOTE: The diagnosis and repair procedures in this manual do not necessarily apply to brand-new Frigidaire dishwashers, newly-installed dishwashers or recently relocated dishwashers. Although they may posess the problems described in this manual, Frigidaire dishwashers that have recently been ...

  11. Frigidaire dishwasher troubleshooting codes [Meaning and Fixes]

    Frigidaire dishwasher troubleshooting codes - What individual Frigidaire dishwasher fault codes signal and how to fix (the issue causing the Frigidaire dishwasher code you are seeing) Frigidaire dishwasher code 188

  12. Frigidaire Dishwasher Troubleshooting

    Don't call a technician yet, our DIY troubleshooting tips can help you accurately identify issues and handle basic Frigidaire dishwasher repairs yourself in no time. Whether it's soap residue left on dishes, annoying grinding noises, broken spray arms, unexpected pooling of water on the floor, or failure to effectively wash the dishes, we ...

  13. Frigidaire Dishwasher: 7 Common Problems & Solutions

    For issues with a Frigidaire DW4500FW1, the first step is to examine the filter system, checking for any clogs or debris. If the filter appears to be dirty or blocked, remove it and clean it with warm, soapy water. Additionally, make sure to check the center spray arm and water inlet valve, both of which may be clogged or blocked.

  14. Frigidaire Dishwasher Troubleshooting & Repair

    Find the most common problems that can cause a Frigidaire Dishwasher not to work - and the parts & instructions to fix them. Free repair advice! En español. 1-800-269-2609 24/7. Your Account. ... Related Videos for Frigidaire Dishwasher Model FGID2474QF3B. 02:34. Disassembly. Frigidaire Dishwasher Disassembly. View Solution. 03:11. Disassembly.

  15. Frigidaire Dishwasher Troubleshooting Guide: Find an Fix!

    4. Dishwasher Noisy Operation. A noisy dishwasher can be disruptive and indicate underlying issues. In this troubleshooting guide, we will address common causes of noisy operation in Frigidaire dishwashers and provide step-by-step instructions to help diagnose and resolve the problem.

  16. Frigidaire Dishwasher Troubleshooting & Repair

    Find the most common problems that can cause a Frigidaire Dishwasher not to work - and the parts & instructions to fix them. Free repair advice! En español. 1-800-269-2609 24/7. Your Account. ... When your Frigidaire dishwasher leaks, doesn't drain or simply leaves dishes spotted with food, it's time to let our troubleshooting guide help you ...

  17. Frigidaire Dishwasher Complete Repair Guide

    Totally we'll teach you how to fix your Frigidaire Dishwasher. Learn error codes and troubleshooting in the Appliance Helpers' newest repair guide. If you ne...

  18. What To Do If Your Dishwasher Is Not Draining

    Is your dishwasher not draining properly? Don't worry, Frigidaire has some helpful tips and videos to help you troubleshoot and fix the problem. Learn how to check the drain hose, the filter, the cycle status, and more. Find out how to get your dishwasher back to its best performance with Frigidaire.

  19. Frigidaire Gallery Dishwasher Troubleshooting

    Follow these frigidaire gallery dishwasher troubleshooting steps and resolve the problem; 1. Find the drain hose; Locate the hose that connects your dishwasher to either the sinks drain or garbage disposal. 2. Check for blockages; Inspect the drain hose, for any clogs or bends and remove any obstructions that you find.

  20. 28 Common Frigidaire Dishwasher Error Codes Explained

    Similar to the ER code, problem-solve this code by checking the connections between the main control panel and the keypad. CL- Door Is Open. This code is one of the most common: it means that the door is open. Try opening and closing the door again, making sure it latches fully. ... what do you do next?There are 28 common dishwasher codes for ...

  21. Frigidaire Dishwasher Troubleshooting Manual (4 Problems Fixed!)

    Cause. Solution. 1. Frigidaire dishwasher not starting. It could be because of power supply issues, water supply problems, faulty door latch, or incorrect dishwasher settings. Ensure the unit gets power, set the water supply valve to on, replace the faulty door latch, and reset the unit to select the correct dishwasher settings. 2.

  22. Frigidaire Trouble Shooting FAQs

    Begins 12:00 a.m. ET on September 1, 2022 & ends 11:59 p.m. ET on August 31, 2024. For official rules visit frigidaireregistration2.dja.com. Having problems with your Frigidaire appliances? Review our frequently asked questions to help troubleshoot your Frigidaire appliances.

  23. Frigidaire Dishwasher Not Draining

    Remove the lower rack, sprayer arm and filters. Inspect and clean your check valve. It may need replacing if washer still will not drain. Some models use a check ball instead of a valve. This ball may be stuck, or need replacing. The check valve may also be located underneath the dishwasher, just before the drain hose.

  24. Frigidaire Dishwasher Troubleshooting & Repair

    Find the most common problems that can cause a Frigidaire Dishwasher not to work - and the parts & instructions to fix them. Free repair advice! En español. 1-800-269-2609 24/7. Your Account. ... Related Videos for Frigidaire Dishwasher Model FGID2466QF7A. 02:34. Disassembly. Frigidaire Dishwasher Disassembly. View Solution. 03:11. Disassembly.