how to write abstract dissertation

  • How to Write an Abstract for a Dissertation or Thesis
  • Doing a PhD

What is a Thesis or Dissertation Abstract?

The Cambridge English Dictionary defines an abstract in academic writing as being “ a few sentences that give the main ideas in an article or a scientific paper ” and the Collins English Dictionary says “ an abstract of an article, document, or speech is a short piece of writing that gives the main points of it ”.

Whether you’re writing up your Master’s dissertation or PhD thesis, the abstract will be a key element of this document that you’ll want to make sure you give proper attention to.

What is the Purpose of an Abstract?

The aim of a thesis abstract is to give the reader a broad overview of what your research project was about and what you found that was novel, before he or she decides to read the entire thesis. The reality here though is that very few people will read the entire thesis, and not because they’re necessarily disinterested but because practically it’s too large a document for most people to have the time to read. The exception to this is your PhD examiner, however know that even they may not read the entire length of the document.

Some people may still skip to and read specific sections throughout your thesis such as the methodology, but the fact is that the abstract will be all that most read and will therefore be the section they base their opinions about your research on. In short, make sure you write a good, well-structured abstract.

How Long Should an Abstract Be?

If you’re a PhD student, having written your 100,000-word thesis, the abstract will be the 300 word summary included at the start of the thesis that succinctly explains the motivation for your study (i.e. why this research was needed), the main work you did (i.e. the focus of each chapter), what you found (the results) and concluding with how your research study contributed to new knowledge within your field.

Woodrow Wilson, the 28th President of the United States of America, once famously said:

how to write abstract dissertation

The point here is that it’s easier to talk open-endedly about a subject that you know a lot about than it is to condense the key points into a 10-minute speech; the same applies for an abstract. Three hundred words is not a lot of words which makes it even more difficult to condense three (or more) years of research into a coherent, interesting story.

What Makes a Good PhD Thesis Abstract?

Whilst the abstract is one of the first sections in your PhD thesis, practically it’s probably the last aspect that you’ll ending up writing before sending the document to print. The reason being that you can’t write a summary about what you did, what you found and what it means until you’ve done the work.

A good abstract is one that can clearly explain to the reader in 300 words:

  • What your research field actually is,
  • What the gap in knowledge was in your field,
  • The overarching aim and objectives of your PhD in response to these gaps,
  • What methods you employed to achieve these,
  • You key results and findings,
  • How your work has added to further knowledge in your field of study.

Another way to think of this structure is:

  • Introduction,
  • Aims and objectives,
  • Discussion,
  • Conclusion.

Following this ‘formulaic’ approach to writing the abstract should hopefully make it a little easier to write but you can already see here that there’s a lot of information to convey in a very limited number of words.

How Do You Write a Good PhD Thesis Abstract?

The biggest challenge you’ll have is getting all the 6 points mentioned above across in your abstract within the limit of 300 words . Your particular university may give some leeway in going a few words over this but it’s good practice to keep within this; the art of succinctly getting your information across is an important skill for a researcher to have and one that you’ll be called on to use regularly as you write papers for peer review.

Keep It Concise

Every word in the abstract is important so make sure you focus on only the key elements of your research and the main outcomes and significance of your project that you want the reader to know about. You may have come across incidental findings during your research which could be interesting to discuss but this should not happen in the abstract as you simply don’t have enough words. Furthermore, make sure everything you talk about in your thesis is actually described in the main thesis.

Make a Unique Point Each Sentence

Keep the sentences short and to the point. Each sentence should give the reader new, useful information about your research so there’s no need to write out your project title again. Give yourself one or two sentences to introduce your subject area and set the context for your project. Then another sentence or two to explain the gap in the knowledge; there’s no need or expectation for you to include references in the abstract.

Explain Your Research

Some people prefer to write their overarching aim whilst others set out their research questions as they correspond to the structure of their thesis chapters; the approach you use is up to you, as long as the reader can understand what your dissertation or thesis had set out to achieve. Knowing this will help the reader better understand if your results help to answer the research questions or if further work is needed.

Keep It Factual

Keep the content of the abstract factual; that is to say that you should avoid bringing too much or any opinion into it, which inevitably can make the writing seem vague in the points you’re trying to get across and even lacking in structure.

Write, Edit and Then Rewrite

Spend suitable time editing your text, and if necessary, completely re-writing it. Show the abstract to others and ask them to explain what they understand about your research – are they able to explain back to you each of the 6 structure points, including why your project was needed, the research questions and results, and the impact it had on your research field? It’s important that you’re able to convey what new knowledge you contributed to your field but be mindful when writing your abstract that you don’t inadvertently overstate the conclusions, impact and significance of your work.

Thesis and Dissertation Abstract Examples

Perhaps the best way to understand how to write a thesis abstract is to look at examples of what makes a good and bad abstract.

Example of A Bad Abstract

Let’s start with an example of a bad thesis abstract:

In this project on “The Analysis of the Structural Integrity of 3D Printed Polymers for use in Aircraft”, my research looked at how 3D printing of materials can help the aviation industry in the manufacture of planes. Plane parts can be made at a lower cost using 3D printing and made lighter than traditional components. This project investigated the structural integrity of EBM manufactured components, which could revolutionise the aviation industry.

What Makes This a Bad Abstract

Hopefully you’ll have spotted some of the reasons this would be considered a poor abstract, not least because the author used up valuable words by repeating the lengthy title of the project in the abstract.

Working through our checklist of the 6 key points you want to convey to the reader:

  • There has been an attempt to introduce the research area , albeit half-way through the abstract but it’s not clear if this is a materials science project about 3D printing or is it about aircraft design.
  • There’s no explanation about where the gap in the knowledge is that this project attempted to address.
  • We can see that this project was focussed on the topic of structural integrity of materials in aircraft but the actual research aims or objectives haven’t been defined.
  • There’s no mention at all of what the author actually did to investigate structural integrity. For example was this an experimental study involving real aircraft, or something in the lab, computer simulations etc.
  • The author also doesn’t tell us a single result of his research, let alone the key findings !
  • There’s a bold claim in the last sentence of the abstract that this project could revolutionise the aviation industry, and this may well be the case, but based on the abstract alone there is no evidence to support this as it’s not even clear what the author did .

This is an extreme example but is a good way to illustrate just how unhelpful a poorly written abstract can be. At only 71 words long, it definitely hasn’t maximised the amount of information that could be presented and the what they have presented has lacked clarity and structure.

A final point to note is the use of the EBM acronym, which stands for Electron Beam Melting in the context of 3D printing; this is a niche acronym for the author to assume that the reader would know the meaning of. It’s best to avoid acronyms in your abstract all together even if it’s something that you might expect most people to know about, unless you specifically define the meaning first.

Example of A Good Abstract

Having seen an example of a bad thesis abstract, now lets look at an example of a good PhD thesis abstract written about the same (fictional) project:

Additive manufacturing (AM) of titanium alloys has the potential to enable cheaper and lighter components to be produced with customised designs for use in aircraft engines. Whilst the proof-of-concept of these have been promising, the structural integrity of AM engine parts in response to full thrust and temperature variations is not clear.

The primary aim of this project was to determine the fracture modes and mechanisms of AM components designed for use in Boeing 747 engines. To achieve this an explicit finite element (FE) model was developed to simulate the environment and parameters that the engine is exposed to during flight. The FE model was validated using experimental data replicating the environmental parameters in a laboratory setting using ten AM engine components provided by the industry sponsor. The validated FE model was then used to investigate the extent of crack initiation and propagation as the environment parameters were adjusted.

This project was the first to investigate fracture patterns in AM titanium components used in aircraft engines; the key finding was that the presence of cavities within the structures due to errors in the printing process, significantly increased the risk of fracture. Secondly, the simulations showed that cracks formed within AM parts were more likely to worsen and lead to component failure at subzero temperatures when compared to conventionally manufactured parts. This has demonstrated an important safety concern which needs to be addressed before AM parts can be used in commercial aircraft.

What Makes This a Good Abstract

Having read this ‘good abstract’ you should have a much better understand about what the subject area is about, where the gap in the knowledge was, the aim of the project, the methods that were used, key results and finally the significance of these results. To break these points down further, from this good abstract we now know that:

  • The research area is around additive manufacturing (i.e. 3D printing) of materials for use in aircraft.
  • The gap in knowledge was how these materials will behave structural when used in aircraft engines.
  • The aim was specifically to investigate how the components can fracture.
  • The methods used to investigate this were a combination of computational and lab based experimental modelling.
  • The key findings were the increased risk of fracture of these components due to the way they are manufactured.
  • The significance of these findings were that it showed a potential risk of component failure that could comprise the safety of passengers and crew on the aircraft.

The abstract text has a much clearer flow through these different points in how it’s written and has made much better use of the available word count. Acronyms have even been used twice in this good abstract but they were clearly defined the first time they were introduced in the text so that there was no confusion about their meaning.

The abstract you write for your dissertation or thesis should succinctly explain to the reader why the work of your research was needed, what you did, what you found and what it means. Most people that come across your thesis, including any future employers, are likely to read only your abstract. Even just for this reason alone, it’s so important that you write the best abstract you can; this will not only convey your research effectively but also put you in the best light possible as a researcher.

Browse PhDs Now

Join thousands of students.

Join thousands of other students and stay up to date with the latest PhD programmes, funding opportunities and advice.

The Writing Center • University of North Carolina at Chapel Hill

What this handout is about

This handout provides definitions and examples of the two main types of abstracts: descriptive and informative. It also provides guidelines for constructing an abstract and general tips for you to keep in mind when drafting. Finally, it includes a few examples of abstracts broken down into their component parts.

What is an abstract?

An abstract is a self-contained, short, and powerful statement that describes a larger work. Components vary according to discipline. An abstract of a social science or scientific work may contain the scope, purpose, results, and contents of the work. An abstract of a humanities work may contain the thesis, background, and conclusion of the larger work. An abstract is not a review, nor does it evaluate the work being abstracted. While it contains key words found in the larger work, the abstract is an original document rather than an excerpted passage.

Why write an abstract?

You may write an abstract for various reasons. The two most important are selection and indexing. Abstracts allow readers who may be interested in a longer work to quickly decide whether it is worth their time to read it. Also, many online databases use abstracts to index larger works. Therefore, abstracts should contain keywords and phrases that allow for easy searching.

Say you are beginning a research project on how Brazilian newspapers helped Brazil’s ultra-liberal president Luiz Ignácio da Silva wrest power from the traditional, conservative power base. A good first place to start your research is to search Dissertation Abstracts International for all dissertations that deal with the interaction between newspapers and politics. “Newspapers and politics” returned 569 hits. A more selective search of “newspapers and Brazil” returned 22 hits. That is still a fair number of dissertations. Titles can sometimes help winnow the field, but many titles are not very descriptive. For example, one dissertation is titled “Rhetoric and Riot in Rio de Janeiro.” It is unclear from the title what this dissertation has to do with newspapers in Brazil. One option would be to download or order the entire dissertation on the chance that it might speak specifically to the topic. A better option is to read the abstract. In this case, the abstract reveals the main focus of the dissertation:

This dissertation examines the role of newspaper editors in the political turmoil and strife that characterized late First Empire Rio de Janeiro (1827-1831). Newspaper editors and their journals helped change the political culture of late First Empire Rio de Janeiro by involving the people in the discussion of state. This change in political culture is apparent in Emperor Pedro I’s gradual loss of control over the mechanisms of power. As the newspapers became more numerous and powerful, the Emperor lost his legitimacy in the eyes of the people. To explore the role of the newspapers in the political events of the late First Empire, this dissertation analyzes all available newspapers published in Rio de Janeiro from 1827 to 1831. Newspapers and their editors were leading forces in the effort to remove power from the hands of the ruling elite and place it under the control of the people. In the process, newspapers helped change how politics operated in the constitutional monarchy of Brazil.

From this abstract you now know that although the dissertation has nothing to do with modern Brazilian politics, it does cover the role of newspapers in changing traditional mechanisms of power. After reading the abstract, you can make an informed judgment about whether the dissertation would be worthwhile to read.

Besides selection, the other main purpose of the abstract is for indexing. Most article databases in the online catalog of the library enable you to search abstracts. This allows for quick retrieval by users and limits the extraneous items recalled by a “full-text” search. However, for an abstract to be useful in an online retrieval system, it must incorporate the key terms that a potential researcher would use to search. For example, if you search Dissertation Abstracts International using the keywords “France” “revolution” and “politics,” the search engine would search through all the abstracts in the database that included those three words. Without an abstract, the search engine would be forced to search titles, which, as we have seen, may not be fruitful, or else search the full text. It’s likely that a lot more than 60 dissertations have been written with those three words somewhere in the body of the entire work. By incorporating keywords into the abstract, the author emphasizes the central topics of the work and gives prospective readers enough information to make an informed judgment about the applicability of the work.

When do people write abstracts?

  • when submitting articles to journals, especially online journals
  • when applying for research grants
  • when writing a book proposal
  • when completing the Ph.D. dissertation or M.A. thesis
  • when writing a proposal for a conference paper
  • when writing a proposal for a book chapter

Most often, the author of the entire work (or prospective work) writes the abstract. However, there are professional abstracting services that hire writers to draft abstracts of other people’s work. In a work with multiple authors, the first author usually writes the abstract. Undergraduates are sometimes asked to draft abstracts of books/articles for classmates who have not read the larger work.

Types of abstracts

There are two types of abstracts: descriptive and informative. They have different aims, so as a consequence they have different components and styles. There is also a third type called critical, but it is rarely used. If you want to find out more about writing a critique or a review of a work, see the UNC Writing Center handout on writing a literature review . If you are unsure which type of abstract you should write, ask your instructor (if the abstract is for a class) or read other abstracts in your field or in the journal where you are submitting your article.

Descriptive abstracts

A descriptive abstract indicates the type of information found in the work. It makes no judgments about the work, nor does it provide results or conclusions of the research. It does incorporate key words found in the text and may include the purpose, methods, and scope of the research. Essentially, the descriptive abstract describes the work being abstracted. Some people consider it an outline of the work, rather than a summary. Descriptive abstracts are usually very short—100 words or less.

Informative abstracts

The majority of abstracts are informative. While they still do not critique or evaluate a work, they do more than describe it. A good informative abstract acts as a surrogate for the work itself. That is, the writer presents and explains all the main arguments and the important results and evidence in the complete article/paper/book. An informative abstract includes the information that can be found in a descriptive abstract (purpose, methods, scope) but also includes the results and conclusions of the research and the recommendations of the author. The length varies according to discipline, but an informative abstract is rarely more than 10% of the length of the entire work. In the case of a longer work, it may be much less.

Here are examples of a descriptive and an informative abstract of this handout on abstracts . Descriptive abstract:

The two most common abstract types—descriptive and informative—are described and examples of each are provided.

Informative abstract:

Abstracts present the essential elements of a longer work in a short and powerful statement. The purpose of an abstract is to provide prospective readers the opportunity to judge the relevance of the longer work to their projects. Abstracts also include the key terms found in the longer work and the purpose and methods of the research. Authors abstract various longer works, including book proposals, dissertations, and online journal articles. There are two main types of abstracts: descriptive and informative. A descriptive abstract briefly describes the longer work, while an informative abstract presents all the main arguments and important results. This handout provides examples of various types of abstracts and instructions on how to construct one.

Which type should I use?

Your best bet in this case is to ask your instructor or refer to the instructions provided by the publisher. You can also make a guess based on the length allowed; i.e., 100-120 words = descriptive; 250+ words = informative.

How do I write an abstract?

The format of your abstract will depend on the work being abstracted. An abstract of a scientific research paper will contain elements not found in an abstract of a literature article, and vice versa. However, all abstracts share several mandatory components, and there are also some optional parts that you can decide to include or not. When preparing to draft your abstract, keep the following key process elements in mind:

  • Reason for writing: What is the importance of the research? Why would a reader be interested in the larger work?
  • Problem: What problem does this work attempt to solve? What is the scope of the project? What is the main argument/thesis/claim?
  • Methodology: An abstract of a scientific work may include specific models or approaches used in the larger study. Other abstracts may describe the types of evidence used in the research.
  • Results: Again, an abstract of a scientific work may include specific data that indicates the results of the project. Other abstracts may discuss the findings in a more general way.
  • Implications: What changes should be implemented as a result of the findings of the work? How does this work add to the body of knowledge on the topic?

(This list of elements is adapted with permission from Philip Koopman, “How to Write an Abstract.” )

All abstracts include:

  • A full citation of the source, preceding the abstract.
  • The most important information first.
  • The same type and style of language found in the original, including technical language.
  • Key words and phrases that quickly identify the content and focus of the work.
  • Clear, concise, and powerful language.

Abstracts may include:

  • The thesis of the work, usually in the first sentence.
  • Background information that places the work in the larger body of literature.
  • The same chronological structure as the original work.

How not to write an abstract:

  • Do not refer extensively to other works.
  • Do not add information not contained in the original work.
  • Do not define terms.

If you are abstracting your own writing

When abstracting your own work, it may be difficult to condense a piece of writing that you have agonized over for weeks (or months, or even years) into a 250-word statement. There are some tricks that you could use to make it easier, however.

Reverse outlining:

This technique is commonly used when you are having trouble organizing your own writing. The process involves writing down the main idea of each paragraph on a separate piece of paper– see our short video . For the purposes of writing an abstract, try grouping the main ideas of each section of the paper into a single sentence. Practice grouping ideas using webbing or color coding .

For a scientific paper, you may have sections titled Purpose, Methods, Results, and Discussion. Each one of these sections will be longer than one paragraph, but each is grouped around a central idea. Use reverse outlining to discover the central idea in each section and then distill these ideas into one statement.

Cut and paste:

To create a first draft of an abstract of your own work, you can read through the entire paper and cut and paste sentences that capture key passages. This technique is useful for social science research with findings that cannot be encapsulated by neat numbers or concrete results. A well-written humanities draft will have a clear and direct thesis statement and informative topic sentences for paragraphs or sections. Isolate these sentences in a separate document and work on revising them into a unified paragraph.

If you are abstracting someone else’s writing

When abstracting something you have not written, you cannot summarize key ideas just by cutting and pasting. Instead, you must determine what a prospective reader would want to know about the work. There are a few techniques that will help you in this process:

Identify key terms:

Search through the entire document for key terms that identify the purpose, scope, and methods of the work. Pay close attention to the Introduction (or Purpose) and the Conclusion (or Discussion). These sections should contain all the main ideas and key terms in the paper. When writing the abstract, be sure to incorporate the key terms.

Highlight key phrases and sentences:

Instead of cutting and pasting the actual words, try highlighting sentences or phrases that appear to be central to the work. Then, in a separate document, rewrite the sentences and phrases in your own words.

Don’t look back:

After reading the entire work, put it aside and write a paragraph about the work without referring to it. In the first draft, you may not remember all the key terms or the results, but you will remember what the main point of the work was. Remember not to include any information you did not get from the work being abstracted.

Revise, revise, revise

No matter what type of abstract you are writing, or whether you are abstracting your own work or someone else’s, the most important step in writing an abstract is to revise early and often. When revising, delete all extraneous words and incorporate meaningful and powerful words. The idea is to be as clear and complete as possible in the shortest possible amount of space. The Word Count feature of Microsoft Word can help you keep track of how long your abstract is and help you hit your target length.

Example 1: Humanities abstract

Kenneth Tait Andrews, “‘Freedom is a constant struggle’: The dynamics and consequences of the Mississippi Civil Rights Movement, 1960-1984” Ph.D. State University of New York at Stony Brook, 1997 DAI-A 59/02, p. 620, Aug 1998

This dissertation examines the impacts of social movements through a multi-layered study of the Mississippi Civil Rights Movement from its peak in the early 1960s through the early 1980s. By examining this historically important case, I clarify the process by which movements transform social structures and the constraints movements face when they try to do so. The time period studied includes the expansion of voting rights and gains in black political power, the desegregation of public schools and the emergence of white-flight academies, and the rise and fall of federal anti-poverty programs. I use two major research strategies: (1) a quantitative analysis of county-level data and (2) three case studies. Data have been collected from archives, interviews, newspapers, and published reports. This dissertation challenges the argument that movements are inconsequential. Some view federal agencies, courts, political parties, or economic elites as the agents driving institutional change, but typically these groups acted in response to the leverage brought to bear by the civil rights movement. The Mississippi movement attempted to forge independent structures for sustaining challenges to local inequities and injustices. By propelling change in an array of local institutions, movement infrastructures had an enduring legacy in Mississippi.

Now let’s break down this abstract into its component parts to see how the author has distilled his entire dissertation into a ~200 word abstract.

What the dissertation does This dissertation examines the impacts of social movements through a multi-layered study of the Mississippi Civil Rights Movement from its peak in the early 1960s through the early 1980s. By examining this historically important case, I clarify the process by which movements transform social structures and the constraints movements face when they try to do so.

How the dissertation does it The time period studied in this dissertation includes the expansion of voting rights and gains in black political power, the desegregation of public schools and the emergence of white-flight academies, and the rise and fall of federal anti-poverty programs. I use two major research strategies: (1) a quantitative analysis of county-level data and (2) three case studies.

What materials are used Data have been collected from archives, interviews, newspapers, and published reports.

Conclusion This dissertation challenges the argument that movements are inconsequential. Some view federal agencies, courts, political parties, or economic elites as the agents driving institutional change, but typically these groups acted in response to movement demands and the leverage brought to bear by the civil rights movement. The Mississippi movement attempted to forge independent structures for sustaining challenges to local inequities and injustices. By propelling change in an array of local institutions, movement infrastructures had an enduring legacy in Mississippi.

Keywords social movements Civil Rights Movement Mississippi voting rights desegregation

Example 2: Science Abstract

Luis Lehner, “Gravitational radiation from black hole spacetimes” Ph.D. University of Pittsburgh, 1998 DAI-B 59/06, p. 2797, Dec 1998

The problem of detecting gravitational radiation is receiving considerable attention with the construction of new detectors in the United States, Europe, and Japan. The theoretical modeling of the wave forms that would be produced in particular systems will expedite the search for and analysis of detected signals. The characteristic formulation of GR is implemented to obtain an algorithm capable of evolving black holes in 3D asymptotically flat spacetimes. Using compactification techniques, future null infinity is included in the evolved region, which enables the unambiguous calculation of the radiation produced by some compact source. A module to calculate the waveforms is constructed and included in the evolution algorithm. This code is shown to be second-order convergent and to handle highly non-linear spacetimes. In particular, we have shown that the code can handle spacetimes whose radiation is equivalent to a galaxy converting its whole mass into gravitational radiation in one second. We further use the characteristic formulation to treat the region close to the singularity in black hole spacetimes. The code carefully excises a region surrounding the singularity and accurately evolves generic black hole spacetimes with apparently unlimited stability.

This science abstract covers much of the same ground as the humanities one, but it asks slightly different questions.

Why do this study The problem of detecting gravitational radiation is receiving considerable attention with the construction of new detectors in the United States, Europe, and Japan. The theoretical modeling of the wave forms that would be produced in particular systems will expedite the search and analysis of the detected signals.

What the study does The characteristic formulation of GR is implemented to obtain an algorithm capable of evolving black holes in 3D asymptotically flat spacetimes. Using compactification techniques, future null infinity is included in the evolved region, which enables the unambiguous calculation of the radiation produced by some compact source. A module to calculate the waveforms is constructed and included in the evolution algorithm.

Results This code is shown to be second-order convergent and to handle highly non-linear spacetimes. In particular, we have shown that the code can handle spacetimes whose radiation is equivalent to a galaxy converting its whole mass into gravitational radiation in one second. We further use the characteristic formulation to treat the region close to the singularity in black hole spacetimes. The code carefully excises a region surrounding the singularity and accurately evolves generic black hole spacetimes with apparently unlimited stability.

Keywords gravitational radiation (GR) spacetimes black holes

Works consulted

We consulted these works while writing this handout. This is not a comprehensive list of resources on the handout’s topic, and we encourage you to do your own research to find additional publications. Please do not use this list as a model for the format of your own reference list, as it may not match the citation style you are using. For guidance on formatting citations, please see the UNC Libraries citation tutorial . We revise these tips periodically and welcome feedback.

Belcher, Wendy Laura. 2009. Writing Your Journal Article in Twelve Weeks: A Guide to Academic Publishing Success. Thousand Oaks, CA: Sage Press.

Koopman, Philip. 1997. “How to Write an Abstract.” Carnegie Mellon University. October 1997. http://users.ece.cmu.edu/~koopman/essays/abstract.html .

Lancaster, F.W. 2003. Indexing And Abstracting in Theory and Practice , 3rd ed. London: Facet Publishing.

You may reproduce it for non-commercial use if you use the entire handout and attribute the source: The Writing Center, University of North Carolina at Chapel Hill

Make a Gift

We use cookies and similar technologies to improve your website experience and help us understand how you use our website. By continuing to use this website, you consent to the usage of cookies. Learn more about our Privacy Statement and Cookie Policy .

  • Our Mission
  • Code of Conduct
  • The Consultants
  • Hours and Locations
  • Apply to Become a Consultant
  • Make an Appointment
  • Face-to-Face Appointments
  • Zoom Appointments
  • Written Feedback Appointments
  • Support for Writers with Disabilities
  • Policies and Restrictions
  • Upcoming Workshops
  • Class Workshops
  • Meet the Consultants
  • Writing Guides and Tools
  • Schedule an appointment! Login or Register
  • For Graduate Students
  • For ESOL Students
  • For Faculty

Writing an Abstract

What is an abstract.

An abstract is a 150- to 250-word paragraph that provides readers with a quick overview of your essay or report and its organization. It should express your thesis (or central idea) and your key points; it should also suggest any implications or applications of the research you discuss in the paper.

According to Carole Slade, an abstract is “a concise summary of the entire paper.”

The function of an abstract is to describe, not to evaluate or defend, the paper.

The abstract should begin with a brief but precise statement of the problem or issue, followed by a description of the research method and design, the major findings, and the conclusions reached.

The abstract should contain the most important key words referring to method and content: these facilitate access to the abstract by computer search and enable a reader to decide whether to read the entire dissertation.

Note: Your abstract should read like an overview of your paper, not a proposal for what you intended to study or accomplish. Avoid beginning your sentences with phrases like, “This essay will examine...” or “In this research paper I will attempt to prove...”  

(The examples above are taken from Form and Style (10th ed.), by Carole Slade; The Scott, Foresman Handbook for Writers (5th ed.); and the Publication Manual of the American Psychological Association (5th ed.).)

Note: The following are specifications for an abstract in APA style, used in the social sciences, such as psychology or anthropology. If you are in another discipline, check with your professor about the format for the abstract.

Writing an Abstract for an IMRaD Paper

Many papers in the social sciences, natural sciences, and engineering sciences follow IMRaD structure: their main sections are entitled Introduction, Methods, Results, and Discussion. People use the abstract to decide whether to read the rest of the paper, so the abstract for such a paper is important.

Because the abstract provides the highlights of the paper, you should draft your abstract after you have written a full draft of the paper. Doing so, you can summarize what you’ve already written in the paper as you compose the abstract.

Typically, an abstract for an IMRaD paper or presentation is one or two paragraphs long (120 – 500 words). Abstracts usually spend

25% of their space on the purpose and importance of the research (Introduction)

25% of their space on what you did (Methods)

35% of their space on what you found (Results)

15% of their space on the implications of the research

Try to avoid these common problems in IMRaD abstracts:

1. The abstract provides a statement of what the paper will ask or explore rather than what it found:

X This report examines the causes of oversleeping. (What did it find out about these causes?) √ Individuals oversleep because they go to bed too late, forget to set their alarms, and keep their rooms dark.

2. The abstract provides general categories rather than specific details in the findings:

X The study draws conclusions about which variables are most important in choosing a movie theater. (What, specifically, are these variables?)

√ The study concludes that the most important variables in choosing a movie theater are comfortable seats and high-quality popcorn.

George Mason University Logo

The Writing Center

4400 University Drive, 2G8 Fairfax, VA 22030

Quick Links

  • Register with us

© Copyright 2024 George Mason University . All Rights Reserved. Privacy Statement | Accessibility

  • USC Libraries
  • Research Guides

Organizing Your Social Sciences Research Paper

  • 3. The Abstract
  • Purpose of Guide
  • Design Flaws to Avoid
  • Independent and Dependent Variables
  • Glossary of Research Terms
  • Reading Research Effectively
  • Narrowing a Topic Idea
  • Broadening a Topic Idea
  • Extending the Timeliness of a Topic Idea
  • Academic Writing Style
  • Choosing a Title
  • Making an Outline
  • Paragraph Development
  • Research Process Video Series
  • Executive Summary
  • The C.A.R.S. Model
  • Background Information
  • The Research Problem/Question
  • Theoretical Framework
  • Citation Tracking
  • Content Alert Services
  • Evaluating Sources
  • Primary Sources
  • Secondary Sources
  • Tiertiary Sources
  • Scholarly vs. Popular Publications
  • Qualitative Methods
  • Quantitative Methods
  • Insiderness
  • Using Non-Textual Elements
  • Limitations of the Study
  • Common Grammar Mistakes
  • Writing Concisely
  • Avoiding Plagiarism
  • Footnotes or Endnotes?
  • Further Readings
  • Generative AI and Writing
  • USC Libraries Tutorials and Other Guides
  • Bibliography

An abstract summarizes, usually in one paragraph of 300 words or less, the major aspects of the entire paper in a prescribed sequence that includes: 1) the overall purpose of the study and the research problem(s) you investigated; 2) the basic design of the study; 3) major findings or trends found as a result of your analysis; and, 4) a brief summary of your interpretations and conclusions.

Writing an Abstract. The Writing Center. Clarion University, 2009; Writing an Abstract for Your Research Paper. The Writing Center, University of Wisconsin, Madison.

Importance of a Good Abstract

Sometimes your professor will ask you to include an abstract, or general summary of your work, with your research paper. The abstract allows you to elaborate upon each major aspect of the paper and helps readers decide whether they want to read the rest of the paper. Therefore, enough key information [e.g., summary results, observations, trends, etc.] must be included to make the abstract useful to someone who may want to examine your work.

How do you know when you have enough information in your abstract? A simple rule-of-thumb is to imagine that you are another researcher doing a similar study. Then ask yourself: if your abstract was the only part of the paper you could access, would you be happy with the amount of information presented there? Does it tell the whole story about your study? If the answer is "no" then the abstract likely needs to be revised.

How to Write a Research Abstract. Office of Undergraduate Research. University of Kentucky; Staiger, David L. “What Today’s Students Need to Know about Writing Abstracts.” International Journal of Business Communication January 3 (1966): 29-33; Swales, John M. and Christine B. Feak. Abstracts and the Writing of Abstracts . Ann Arbor, MI: University of Michigan Press, 2009.

Structure and Writing Style

I.  Types of Abstracts

To begin, you need to determine which type of abstract you should include with your paper. There are four general types.

Critical Abstract A critical abstract provides, in addition to describing main findings and information, a judgment or comment about the study’s validity, reliability, or completeness. The researcher evaluates the paper and often compares it with other works on the same subject. Critical abstracts are generally 400-500 words in length due to the additional interpretive commentary. These types of abstracts are used infrequently.

Descriptive Abstract A descriptive abstract indicates the type of information found in the work. It makes no judgments about the work, nor does it provide results or conclusions of the research. It does incorporate key words found in the text and may include the purpose, methods, and scope of the research. Essentially, the descriptive abstract only describes the work being summarized. Some researchers consider it an outline of the work, rather than a summary. Descriptive abstracts are usually very short, 100 words or less. Informative Abstract The majority of abstracts are informative. While they still do not critique or evaluate a work, they do more than describe it. A good informative abstract acts as a surrogate for the work itself. That is, the researcher presents and explains all the main arguments and the important results and evidence in the paper. An informative abstract includes the information that can be found in a descriptive abstract [purpose, methods, scope] but it also includes the results and conclusions of the research and the recommendations of the author. The length varies according to discipline, but an informative abstract is usually no more than 300 words in length.

Highlight Abstract A highlight abstract is specifically written to attract the reader’s attention to the study. No pretense is made of there being either a balanced or complete picture of the paper and, in fact, incomplete and leading remarks may be used to spark the reader’s interest. In that a highlight abstract cannot stand independent of its associated article, it is not a true abstract and, therefore, rarely used in academic writing.

II.  Writing Style

Use the active voice when possible , but note that much of your abstract may require passive sentence constructions. Regardless, write your abstract using concise, but complete, sentences. Get to the point quickly and always use the past tense because you are reporting on a study that has been completed.

Abstracts should be formatted as a single paragraph in a block format and with no paragraph indentations. In most cases, the abstract page immediately follows the title page. Do not number the page. Rules set forth in writing manual vary but, in general, you should center the word "Abstract" at the top of the page with double spacing between the heading and the abstract. The final sentences of an abstract concisely summarize your study’s conclusions, implications, or applications to practice and, if appropriate, can be followed by a statement about the need for additional research revealed from the findings.

Composing Your Abstract

Although it is the first section of your paper, the abstract should be written last since it will summarize the contents of your entire paper. A good strategy to begin composing your abstract is to take whole sentences or key phrases from each section of the paper and put them in a sequence that summarizes the contents. Then revise or add connecting phrases or words to make the narrative flow clearly and smoothly. Note that statistical findings should be reported parenthetically [i.e., written in parentheses].

Before handing in your final paper, check to make sure that the information in the abstract completely agrees with what you have written in the paper. Think of the abstract as a sequential set of complete sentences describing the most crucial information using the fewest necessary words. The abstract SHOULD NOT contain:

  • A catchy introductory phrase, provocative quote, or other device to grab the reader's attention,
  • Lengthy background or contextual information,
  • Redundant phrases, unnecessary adverbs and adjectives, and repetitive information;
  • Acronyms or abbreviations,
  • References to other literature [say something like, "current research shows that..." or "studies have indicated..."],
  • Using ellipticals [i.e., ending with "..."] or incomplete sentences,
  • Jargon or terms that may be confusing to the reader,
  • Citations to other works, and
  • Any sort of image, illustration, figure, or table, or references to them.

Abstract. Writing Center. University of Kansas; Abstract. The Structure, Format, Content, and Style of a Journal-Style Scientific Paper. Department of Biology. Bates College; Abstracts. The Writing Center. University of North Carolina; Borko, Harold and Seymour Chatman. "Criteria for Acceptable Abstracts: A Survey of Abstracters' Instructions." American Documentation 14 (April 1963): 149-160; Abstracts. The Writer’s Handbook. Writing Center. University of Wisconsin, Madison; Hartley, James and Lucy Betts. "Common Weaknesses in Traditional Abstracts in hte Social Sciences." Journal of the American Society for Information Science and Technology 60 (October 2009): 2010-2018; Procter, Margaret. The Abstract. University College Writing Centre. University of Toronto; Riordan, Laura. “Mastering the Art of Abstracts.” The Journal of the American Osteopathic Association 115 (January 2015 ): 41-47; Writing Report Abstracts. The Writing Lab and The OWL. Purdue University; Writing Abstracts. Writing Tutorial Services, Center for Innovative Teaching and Learning. Indiana University; Koltay, Tibor. Abstracts and Abstracting: A Genre and Set of Skills for the Twenty-First Century . Oxford, UK: 2010; Writing an Abstract for Your Research Paper. The Writing Center, University of Wisconsin, Madison.

Writing Tip

Never Cite Just the Abstract!

Citing to just a journal article's abstract does not confirm for the reader that you have conducted a thorough or reliable review of the literature. If the full-text is not available, go to the USC Libraries main page and enter the title of the article [NOT the title of the journal]. If the Libraries have a subscription to the journal, the article should appear with a link to the full-text or to the journal publisher page where you can get the article. If the article does not appear, try searching Google Scholar using the link on the USC Libraries main page. If you still can't find the article after doing this, contact a librarian or you can request it from our free i nterlibrary loan and document delivery service .

  • << Previous: Research Process Video Series
  • Next: Executive Summary >>
  • Last Updated: Feb 8, 2024 1:57 PM
  • URL: https://libguides.usc.edu/writingguide
  • How it works

How to Write an Abstract for a Dissertation

Published by Owen Ingram at August 11th, 2021 , Revised On September 20, 2023

Dissertation Abstract – Definition

The abstract is regarded as the foremost component of a dissertation. It will be your first chance to set precise expectations for the supervisor, examiner or graduate committee members. An abstract for a dissertation is the first real significant narrative of your work and is placed at the beginning of the dissertation paper.

Presented in a shortened form, an abstract is a very brief overview of your research .

In this article, we will uncover every piece of information you need to know to write an abstract.  

According to the online archives of Simon Fraser University research database, “an abstract is not merely an introduction in the sense of a preface, preamble, or advance organizer that prepares the reader for the thesis. In addition to that function, it must be capable of substituting for the whole thesis when there are insufficient time and space for the full text. ”

Do I Need to Write an Abstract?

You will be required to include an abstract at the beginning of your paper if you are working on your thesis, dissertation, research paper, or publishing a paper in any academic journal.

Even though the abstract appears right at the start of a dissertation paper, it is generally written at last. For it is only after you have compiled all the evidence and data, interpreted every piece of finding, backed your interpretation(s) with enough theoretical evidence and answered your research questions, that you can sum it all up in 150-200 words. The general length of an abstract.

 The table of contents is the section that immediately follows an abstract. Here is a guide on how to create a table of contents for the dissertation .

Your abstract should be an  entirely autonomous and independent text and never be an extract taken from within the paper’s original content. This also implies, indirectly, that it is unethical in research contexts to copy-paste chunks from within your own research in an abstract.

In particular, an abstract aims to provide an overview of research aim and objectives, methods of research employed, results obtained, findings, most salient interpretation(s), the conclusion and implication(s) of your research. Readers should be able to completely understand all aspects of your research work just by reading your abstract.

Also Read : How to Write Dissertation Discussion Chapter , How to Write a Remarkable Dissertation?

Stuck on a difficult dissertation? We can help!

Our Essay Writing Service Features:

  • Expert UK Writers
  • Plagiarism-free
  • Timely Delivery
  • Thorough Research
  • Rigorous Quality Control

We can help

Now you can pay in up to 4 installments

How to Write a Dissertation Abstract

A dissertation abstract serves as a deal maker or breaker when it comes to making a strong impression on your readers. Your dissertation abstract can either motivate your readers to continue reading or discourage them from  moving on to the next chapters .

The abstract of a dissertation needs to be conspicuous, meaningful, interesting and of course, informative. It should contain brief but relevant information from all chapters of your dissertation to provide a brief overview of the research that has been conducted. This would mean its:

  • What (topic statement of your research)
  • Who (the sample)
  • Why (the significance/objectives/aims/questions/hypothesis of your research)
  • Where (the background/setting of your research)
  • And how (the research design/tools/methods/methodologies etc. of your research)

 Here, we have put together some guidelines for students to understand how to write an abstract for a dissertation to make a great first impression on readers.

Key Components of a Dissertation Abstract

The  key elements of a dissertation abstract are as follows:

  • Background statement/problem statement/thesis statement
  • Information regarding research sample
  • Methods of research employed
  • A brief description of the results obtained and their interpretation (only the most important one(s))
  • A summary of conclusion, limitations and future recommendations/implications (only the most salient ones)

1. Background/Problem Statement/Aims and Objectives

The first couple of sentences of your dissertation abstract should provide a summary of the purpose of your research. This can be expressed as follows:

  • Background statement – Provide a brief perspective on the theoretical and practical significance of your work.
  • The problem statement clearly communicates to the readers why there was a need to research the chosen topic.
  • Present an overview of the research’s aim and objectives to establish what your research intended to achieve.
  • Thesis statement – what is the main idea of your dissertation paper? What are your claims in reference to the established research questions?

Avoid writing this part of the abstract in future tense because it refers to concluded actions.

  • This study will investigate the relationship between coffee consumption and productivity.
  • This study investigates the relationship between coffee consumption and productivity.

Also read: How to Get Dissertation Deadline Extension – Some Practical Methods.

This one-to-two lined section will give information about who the sample in your study was; where they are located/residing, etc. The reasons for selecting that group of participants, for instance, is not relevant for mention in an abstract.

3. Research Methods

Briefly specify your  dissertation research methodology immediately after stating the purpose and sample of your dissertation paper. Here, you will be expected to summarise how you straightforwardly conducted your research.

Like the first section, a description of research  methods should also be written in the simple past tense. There is absolutely  no need to highlight the limitations and/or validity  of your research methods here.

The goal is to take the readers through the overall approach and process quickly.

4. Research Findings

Provide a brief overview of the major  findings of your dissertation study . If you think you undiscovered multiple major findings, only mention the ones that directly answer a research question or two that was/were part of your study to begin with. For instance, if you studied the relation between two variables and your findings indicate it’s a positive correlation, you simply state that finding, not the other, minor ones related to this specific one.

This section is the crux of your abstract, so make sure you demonstrate how your research addressed the research objectives.

Furthermore, due to the word limit (150-200) of the abstract and the complexity of your research, you might not be able to include all results here. If that is the case, have only the most significant results.

This portion should be written in the past simple or present tense. Here is an example:

  • Analysis of the responses has shown that there is a strong correlation between consumption and productivity.
  • Analysis of the responses shows there is a strong correlation between coffee consumption and productivity.
  • Analysis of the responses showed there was a strong correlation between coffee consumption and productivity.

5. Conclusion and Recommendation/Implication

Lastly, the  abstract of a dissertation  should  conclude your dissertation research . The conclusion should clearly report how your study addressed the research problem.

Use this part of the abstract to convince people how your research proved the argument or theory your research was built on and started off with.

Provide recommendations for practical implementation to clearly understand your audience how your work will solve the problem at hand.

Finally, do not forget to mention important research limitations briefly. For example, selecting a smaller sample size due to some constraints would be a limitation worth mentioning. This will add more weight and credibility to your research.

Make use of the present simple test when writing the conclusion.

Some institutions, however, dictate that you write one or two lines about the long- or short-term implications your research might have. This component would be the last one in an abstract, preceded by the conclusive statement.

Abstract keywords/phrases 

You might be asked to include important key terms and phrases at the end of the abstract, especially if your paper has been selected for publication in an academic journal.

These keywords help potential readers find your paper in search engines during their  desk-based research .

However, it should be noted that some academic journals have their own specific formatting requirements for keywords. It’s recommended that you read the requirements about keywords in their publication manuals to avoid any misunderstanding.

More on Abstract keywords

According to Hartley and Kostoff (2003), following are some different methods for supplying keywords for an abstract:

Researchers “supply them with no restrictions on the numbers allowed; supply up to a fixed number (e.g. six); supply key words as appropriate from a specified list; editors supplement/amend authors’ key words; editors supply key words; editors supply key words from a specified list; referees supply key words from a specified list; keywords are allocated according to the ‘house-rules’ applied to all journals; distributed by a specific publisher; keywords are determined by computer program at proof stage”.

Format of a Dissertation Abstract

The typical size of an abstract for a masters’ dissertation is 300-400 words whereas abstracts for undergraduate dissertation papers are 150-200 words in size.

Since their findings are generally more in number, abstracts for PhD-level dissertation papers are assigned 300-350 words. The dissertation abstract structure should be such that there are one or two sentences assigned to each chapter of the dissertation.

For example, if your dissertation paper has 5 chapters, there should be a minimum of 8-10 sentences in the abstract to provide a reflective summary of each chapter’s information.

As is the case  with the dissertation introduction chapter , you will be expected to specify the research questions clearly.

You might need to rearrange them and/or reduce the word count without missing out on any important element, considering there is room for only two to three research questions generally placed at the beginning of the abstract.

  Poor dissertation abstracts don’t present the findings of the research. It is important to recognize that the readers of your dissertation paper will be more interested in what findings you came up with as a result of your research and not merely what you did. Use at least 2 to 3 sentences for summarising the results and their interpretation.

Look for the formatting requirements in your dissertation handbook or writing guidelines provided by your school. Make sure to stay within the permissible word limit.  An abstract too long or too short will not serve the purpose.

Tips on How to Write the Abstract for Dissertation

Condensing your entire dissertation into just a few sentences can be a daunting task, especially if it’s your first time writing a dissertation abstract.

It is important to get your dissertation abstract right because this part of the dissertation paper is the first real piece of written description that your audience will read. You can even recall some of your own experiences where, due to shortage of time or many deadlines looming above your head, you had to skim and scam the abstract of a research article or journal paper you stumbled across. It probably gave you a good enough idea whether it was worth it to bookmark that paper to read fully later now, didn’t it?

That’s exactly the kind of effect your own abstract should have on its readers, too. It’s meant to give a holistic view of the entire research.

Here are some tips for you to make sure you write this part to the highest possible academic quality:

Also Read: Different Research Methods for Dissertation?

Tip #1: Avoid Citing Publications

Student researchers often get carried away with the research of professional researchers when writing an abstract. Avoid focusing on others’ work and demonstrate how your own research will substantially contribute to your area of study.

Depending on the allowable word limit for the abstract, you might be able to squeeze in a sentence or two about the scholarly background of the research problem you wish to address. Still, there is no need to cite any publications.

Tip #2: Be Concise and to-the-point

Your dissertation abstract should be attention-grabbing, even though you will have only a few hundred words to work with. So. it is crucial to communicate your research work in the most concise manner.  Never stuff your dissertation abstract with needless words and avoid vague verbiage that might put your readers off-track.

 Need help with writing a killer dissertation abstract? Our writers can write an abstract for a dissertation following your school’s guidelines. Or get help from our expert academics  with any part of your dissertation.

Tip # 3: Read Sample Abstracts

Learn the art of writing great dissertation abstract by reading abstract dissertation samples. It would make sense to look at how other people in your academic subject have written their abstracts.

If you have already conducted your  dissertation literature review , you might have already read many research paper abstracts – which you could use to get useful insights into how to format your dissertation abstract. Here is an abstract dissertation example to help you get started.

Tip #4: Coverage and Presentation

Remember, an abstract is one single paragraph. There are no breaks in it. It continues as a single body. Furthermore, it is written in a separate page. No other chapter or sub-headings etc. come before or after the abstract on the same page. There are also no headings – such as the topic of your research – above the title ‘Abstract’ on the abstract page. Simply give the heading of ‘Abstract’ and start it off from there. And last but not the least, another important thing to keep in mind is that abstract (pretty much like the rest of your thesis) will be double-spaced.

Tip #5: Language

Other researchers will look for key terms specific to your research field to figure out the purpose and nature of your dissertation paper. Make sure to include relevant terminology necessary for understanding your abstract and thereby determining what the research was about.

Tip #6: Shortening a Lengthy Abstract

It’s natural to sometimes get carried away while writing…even in academic writing. As Trochim and other writers state in their book, Research Methods: The Essential Knowledge Base , “In order to shorten your abstract, you should eliminate nonessential information wherever possible—this includes transitions phrases (e.g., ‘the results demonstrate . . .’).”

Can I use an excerpt from the paper as an abstract?

No, you should not. It is important for an abstract to be an entirely autonomous and independent text and never be an extract taken from within the paper’s original content. Write it in your own words, 

What is the purpose of an abstract?

The abstract of your dissertation provides a brief overview of the research conducted and the results obtained.

What should a dissertation abstract contain?

The abstract of your dissertation must give background information, mention the problem statement , research aims , and objectives, sample information, methods of research , the findings , conclusion and recommendations/implications.

Can I cite a reference in the abstract?

No, you must never cite any reference in the abstract.

You May Also Like

How to Structure a Dissertation or Thesis Need interesting and manageable Finance and Accounting dissertation topics? Here are the trending Media dissertation titles so you can choose one most suitable to your needs.

Table of contents is an essential part of dissertation paper. Here is all you need to know about how to create the best table of contents for dissertation.

Dissertation discussion is where you explore the relevance and significance of results. Here are guidelines to help you write the perfect discussion chapter.

USEFUL LINKS

LEARNING RESOURCES

DMCA.com Protection Status

COMPANY DETAILS

Research-Prospect-Writing-Service

  • How It Works

Purdue Online Writing Lab Purdue OWL® College of Liberal Arts

OWL logo

Welcome to the Purdue OWL

This page is brought to you by the OWL at Purdue University. When printing this page, you must include the entire legal notice.

Copyright ©1995-2018 by The Writing Lab & The OWL at Purdue and Purdue University. All rights reserved. This material may not be published, reproduced, broadcast, rewritten, or redistributed without permission. Use of this site constitutes acceptance of our terms and conditions of fair use.

Scholars often write abstracts for various applications: conference presentations may require an abstract or other short summary for a program; journal articles almost always require abstracts; invited talks and lectures are often advertised using an abstract. While the application may necessarily change the length of the abstract (a conference program may only allow for 50-75 words, for instance), the purpose and structure remains fairly constant.

Abstracts are generally kept brief (approximately 150-200 words). They differ by field, but in general, they need to summarize the article so that readers can decide if it is relevant to their work. The typical abstract includes these elements:

  • A statement of the problem and objectives
  • A statement of the significance of the work
  • A summary of employed methods or your research approach
  • A summary of findings or conclusions of the study
  • A description of the implications of the findings

Regardless of field, abstract authors should explain the purpose of the work, methods used, the results and the conclusions that can be drawn. However, each field purports slightly different ways to structure the abstract. A reliable strategy is to write the abstract as a condensed version of your article, with 1-2 sentences summarizing each major section. This means that in many of the sciences and a large portion of the humanities, abstracts follow a version of the IMRAD structure: Introduction, Methods, Results, and Discussion.

Most scientific journals require authors to submit such abstracts. It is generally advisable to write the abstract in the English language. That is because most papers in other languages, especially Asian nations, tend to publish an English abstract with common search engines, such as, the MLA site.

Example Abstract

This example abstract follows the IMRAD structure closely. The first two sentences are the introduction and background information. Sentences 3-5 describe the methods used in the study. Sentence 6 summarizes the results, while the last two sentences summarize the discussion and conclusion of the study; they also indicate the significance of the results.

Usability and User-Centered Theory for 21 st Century OWLs — by Dana Lynn Driscoll, H. Allen Brizee, Michael Salvo, and Morgan Sousa from The Handbook of Research on Virtual Workplaces and the New Nature of Business Practices . Eds. Kirk St. Amant and Pavel Zemlansky. Hershey, PA: Idea Group Publishing, 2008.

This article describes results of usability research conducted on the Purdue Online Writing Lab (OWL). The Purdue OWL is an information-rich educational website that provides free writing resources to users worldwide. Researchers conducted two generations of usability tests. In the first test, participants were asked to navigate the OWL and answer questions. Results of the first test and user-centered scholarship indicated that a more user-centered focus would improve usability. The second test asked participants to answer writing-related questions using both the OWL website and a user-centered OWL prototype. Participants took significantly less time to find information using the prototype and reported a more positive response to the user-centered prototype than the original OWL. Researchers conclude that a user-centered website is more effective and can be a model for information-rich online resources. Researchers also conclude that usability research can be a productive source of ideas, underscoring the need for participatory invention.

 alt=

Academic & Employability Skills

Subscribe to academic & employability skills.

Enter your email address to subscribe to this blog and receive notifications of new posts by email.

Join 400 other subscribers.

Email Address

' src=

Writing an abstract - a six point checklist (with samples)

Posted in: abstract , dissertations

how to write abstract dissertation

The abstract is a vital part of any research paper. It is the shop front for your work, and the first stop for your reader. It should provide a clear and succinct summary of your study, and encourage your readers to read more. An effective abstract, therefore should answer the following questions:

  • Why did you do this study or project?
  • What did you do and how?
  • What did you find?
  • What do your findings mean?

So here's our run down of the key elements of a well-written abstract.

  • Size - A succinct and well written abstract should be between approximately 100- 250 words.
  • Background - An effective abstract usually includes some scene-setting information which might include what is already known about the subject, related to the paper in question (a few short sentences).
  • Purpose  - The abstract should also set out the purpose of your research, in other words, what is not known about the subject and hence what the study intended to examine (or what the paper seeks to present).
  • Methods - The methods section should contain enough information to enable the reader to understand what was done, and how. It should include brief details of the research design, sample size, duration of study, and so on.
  • Results - The results section is the most important part of the abstract. This is because readers who skim an abstract do so to learn about the findings of the study. The results section should therefore contain as much detail about the findings as the journal word count permits.
  • Conclusion - This section should contain the most important take-home message of the study, expressed in a few precisely worded sentences. Usually, the finding highlighted here relates to the primary outcomes of the study. However, other important or unexpected findings should also be mentioned. It is also customary, but not essential, to express an opinion about the theoretical or practical implications of the findings, or the importance of their findings for the field. Thus, the conclusions may contain three elements:
  • The primary take-home message
  • Any additional findings of importance
  • Implications for future studies 

abstract 1

Example Abstract 2: Engineering Development and validation of a three-dimensional finite element model of the pelvic bone.

bone

Abstract from: Dalstra, M., Huiskes, R. and Van Erning, L., 1995. Development and validation of a three-dimensional finite element model of the pelvic bone. Journal of biomechanical engineering, 117(3), pp.272-278.

And finally...  A word on abstract types and styles

Abstract types can differ according to subject discipline. You need to determine therefore which type of abstract you should include with your paper. Here are two of the most common types with examples.

Informative Abstract

The majority of abstracts are informative. While they still do not critique or evaluate a work, they do more than describe it. A good informative abstract acts as a surrogate for the work itself. That is, the researcher presents and explains all the main arguments and the important results and evidence in the paper. An informative abstract includes the information that can be found in a descriptive abstract [purpose, methods, scope] but it also includes the results and conclusions of the research and the recommendations of the author. The length varies according to discipline, but an informative abstract is usually no more than 300 words in length.

Descriptive Abstract A descriptive abstract indicates the type of information found in the work. It makes no judgements about the work, nor does it provide results or conclusions of the research. It does incorporate key words found in the text and may include the purpose, methods, and scope of the research. Essentially, the descriptive abstract only describes the work being summarised. Some researchers consider it an outline of the work, rather than a summary. Descriptive abstracts are usually very short, 100 words or less.

(Adapted from: http://www.ncbi.nlm.nih.gov/pmc/articles/PMC3136027/ )

Share this:

  • Click to print (Opens in new window)
  • Click to email a link to a friend (Opens in new window)
  • Click to share on WhatsApp (Opens in new window)
  • Click to share on LinkedIn (Opens in new window)
  • Click to share on Twitter (Opens in new window)
  • Click to share on Facebook (Opens in new window)

Click here to cancel reply.

  • Email * (we won't publish this)

Write a response

' src=

Navigating the dissertation process: my tips for final years

Imagine for a moment... After months of hard work and research on a topic you're passionate about, the time has finally come to click the 'Submit' button on your dissertation. You've just completed your longest project to date as part...

Vanda Sigel and another HSS student working on laptops.

8 ways to beat procrastination

Whether you’re writing an assignment or revising for exams, getting started can be hard. Fortunately, there’s lots you can do to turn procrastination into action.

A post-it note reading 'Procrastination' surrounded by balls of screwed-up paper

My takeaways on how to write a scientific report

If you’re in your dissertation writing stage or your course includes writing a lot of scientific reports, but you don’t quite know where and how to start, the Skills Centre can help you get started. I recently attended their ‘How...

Person in a lab coat looking into a microscope doing an experiment in a laboratory. There's a row of test tubes on the bench. The person is writing on a clipboard.

How to Write an Abstract for a Dissertation

At roughly 200 words, the abstract is the shortest part of the dissertation! Thankfully, it’s also one of the simplest to write – as long as you approach it sensibly…

The cardinal rule for writing an abstract is to leave it ‘til last. After all, the abstract is a summary of the entire dissertation, so it makes sense to leave it until the end.

Having said that, it’s a good idea to prepare yourself. If you learn how to write an abstract well ahead of time, there’ll be no last-minute panics. With that in mind, let’s run through the basics of writing a dissertation abstract.

What is the purpose of an abstract?

As mentioned, the abstract is essentially a summary of your dissertation. Think of it like a film synopsis or a book blurb. In roughly 200 words, it should tell the reader exactly what to expect from reading your dissertation.

A good abstract will also hint at the relevance and usefulness of the project. Indeed, in many ways, the abstract is an opportunity for you to ‘sell’ your project to the reader. The more compelling the abstract is, the more likely they are to read your dissertation.

What should an abstract include?

Later on, we’ll show you exactly how to structure an abstract. But first, it’s important to understand the elements of an abstract. In brief, an abstract should:

  • Intrigue – In the first few sentences, you should introduce your topic to the reader, and highlight a key debate or issue that inspired the dissertation. If you can intrigue your reader in the opening sentence, they’re much more likely to continue reading!
  • Convince – You’ll then need to convince your reader that your dissertation is necessary and worthwhile. Often, this is achieved by explaining how your dissertation extends or challenges the existing literature.
  • Describe – You should describe the research methods very briefly but accurately.
  • Inform – The abstract should be informative, particularly in relation to the findings of the study. It is not necessary to state all the findings, but you should highlight the key insights.
  • Demonstrate relevance and usefulness – As mentioned, a good abstract finishes by saying who will find this research useful and why. Occasionally, it may also suggest directions for future research.

Remember, since the abstract is a summary of a project you’ve completed, it should be written in the present or past simple tense .

How should you structure an abstract?

The structure of an abstract can vary depending on the subject you are studying at university. Also, some universities have specific guidelines for writing an abstract, so always check with your tutor first. In particular, APA style has quite specific rules for formatting an abstract.

Though, generally speaking, the following structure is a good starting point for students in most subject areas:

1. Provide some background

The first 1-2 sentences should provide a very brief background to your topic of study. Remember, the aim is to intrigue here. These sentences are usually written in the present tense.

2. Refer to existing debates

Next, you should briefly explain the existing theory/research that has informed your chosen topic. If there are any key debates relevant to your topic, briefly mention them here. Try to limit this to 1-2 sentences and stick with the present or past tense.

3. Explain why the dissertation was worthwhile

In the next sentence or two, you’ll need to convince your reader that this study was worthwhile. Try to use the previous few sentences as a springboard, but explain why your study was unique.

4. State your research question

If it was not stated in the last section, the next sentence should clearly state your research question. You may have had more than one research question/research aim, but try to be as succinct as possible here.

5. State the methodology

In this sentence, you should clearly describe the methodology used . There is no need to explain why this method was chosen; just be as precise and succinct as possible.

6. State the key findings

The next sentence should explain the findings of your dissertation. Try not to be too technical here as your reader may be a novice. Also, there probably won’t be space to state all your findings, so present the ones that are most relevant and interesting. In fact, leaving a bit to the imagination is a good thing because it should intrigue the reader…

7. State who will find this research useful and why

In the last sentence, you should explain the usefulness and relevance of your dissertation. Consider: Who will benefit from this research? Does it have any practical applications?

8. List of keywords

Depending on your subject, you may be expected to provide a short list of keywords. This is common in Psychology research, for example. Check with your tutor if keywords are necessary. Remember, these should be listed in alphabetical order underneath the body of the abstract.

What’s the secret to writing a great abstract?

So, we’ve covered the basics of writing an abstract, but how can you write a first-class dissertation abstract? Well, we have two pieces of advice.

Firstly, be precise and succinct. Once you’ve written your abstract, you should set it aside for at least 24 hours, and then return to it with fresh eyes. As you read through it, cut out anything that’s not absolutely essential. Also, consider rewording sentences so that they are clear and readable. You can use our disseration writing services to help you with this.

Secondly, when you reveal your findings, try to find the right balance between revealing too much and revealing too little. It’s important to demonstrate that your study was interesting and relevant, but if you reveal too much, the reader may not want to bother reading your dissertation.

Indeed, writing a good dissertation is all about taking your reader on a journey and building momentum as you go. If you can manage this, you’ll keep your reader’s attention until the very last page! Creating this balance is not easy but it is a skill that can be developed through practice.

Common mistakes to avoid

So, we’ve reviewed the components of a good dissertation abstract. But what constitutes a bad abstract? Let’s finish by exploring some of the common mistakes students make when writing an abstract:

  • Too long – Generally speaking, an abstract should be between 150 and 250 words, and it should fit on one page. If you make it too long, it won’t be compelling, and it’ll probably just confuse the reader.
  • Lack of relevant keywords in the body of the abstract – Although an abstract should be written in reasonably non-technical language, it should include some relevant keywords. E.g. In the above example “Green marketing” and “Green purchasing behaviour” were pertinent keywords. Using appropriate keywords shows you’ve done wider reading and you understand where your project ‘fits in’ to the literature. Also, if your research were to be published, keywords would help other researchers to find it.
  • Written in the wrong tense – A common mistake students make is that they write their abstract in the future tense (I.e. “This dissertation will explore the relationship between…”). The research has already been conducted, so it should be written in the past tense.
  • Wrong positioning – The abstract should go after the title page and before the contents page.
  • References and quotes – Generally speaking, an abstract should not contain references or quotations from other theorists. The only exception might be if your dissertation was solely focused on one particular theory/debate. In that case, keep quotes and references to an absolute minimum – your introduction and literature review will provide a comprehensive description of the theory!

You may also like

Have a language expert improve your writing

Run a free plagiarism check in 10 minutes, generate accurate citations for free.

  • Knowledge Base
  • Dissertation

What Is a Dissertation? | Guide, Examples, & Template

Structure of a Dissertation

A dissertation is a long-form piece of academic writing based on original research conducted by you. It is usually submitted as the final step in order to finish a PhD program.

Your dissertation is probably the longest piece of writing you’ve ever completed. It requires solid research, writing, and analysis skills, and it can be intimidating to know where to begin.

Your department likely has guidelines related to how your dissertation should be structured. When in doubt, consult with your supervisor.

You can also download our full dissertation template in the format of your choice below. The template includes a ready-made table of contents with notes on what to include in each chapter, easily adaptable to your department’s requirements.

Download Word template Download Google Docs template

  • In the US, a dissertation generally refers to the collection of research you conducted to obtain a PhD.
  • In other countries (such as the UK), a dissertation often refers to the research you conduct to obtain your bachelor’s or master’s degree.

Instantly correct all language mistakes in your text

Upload your document to correct all your mistakes in minutes

upload-your-document-ai-proofreader

Table of contents

Dissertation committee and prospectus process, how to write and structure a dissertation, acknowledgements or preface, list of figures and tables, list of abbreviations, introduction, literature review, methodology, reference list, proofreading and editing, defending your dissertation, free checklist and lecture slides.

When you’ve finished your coursework, as well as any comprehensive exams or other requirements, you advance to “ABD” (All But Dissertation) status. This means you’ve completed everything except your dissertation.

Prior to starting to write, you must form your committee and write your prospectus or proposal . Your committee comprises your adviser and a few other faculty members. They can be from your own department, or, if your work is more interdisciplinary, from other departments. Your committee will guide you through the dissertation process, and ultimately decide whether you pass your dissertation defense and receive your PhD.

Your prospectus is a formal document presented to your committee, usually orally in a defense, outlining your research aims and objectives and showing why your topic is relevant . After passing your prospectus defense, you’re ready to start your research and writing.

Receive feedback on language, structure, and formatting

Professional editors proofread and edit your paper by focusing on:

  • Academic style
  • Vague sentences
  • Style consistency

See an example

how to write abstract dissertation

The structure of your dissertation depends on a variety of factors, such as your discipline, topic, and approach. Dissertations in the humanities are often structured more like a long essay , building an overall argument to support a central thesis , with chapters organized around different themes or case studies.

However, hard science and social science dissertations typically include a review of existing works, a methodology section, an analysis of your original research, and a presentation of your results , presented in different chapters.

Dissertation examples

We’ve compiled a list of dissertation examples to help you get started.

  • Example dissertation #1: Heat, Wildfire and Energy Demand: An Examination of Residential Buildings and Community Equity (a dissertation by C. A. Antonopoulos about the impact of extreme heat and wildfire on residential buildings and occupant exposure risks).
  • Example dissertation #2: Exploring Income Volatility and Financial Health Among Middle-Income Households (a dissertation by M. Addo about income volatility and declining economic security among middle-income households).
  • Example dissertation #3: The Use of Mindfulness Meditation to Increase the Efficacy of Mirror Visual Feedback for Reducing Phantom Limb Pain in Amputees (a dissertation by N. S. Mills about the effect of mindfulness-based interventions on the relationship between mirror visual feedback and the pain level in amputees with phantom limb pain).

The very first page of your document contains your dissertation title, your name, department, institution, degree program, and submission date. Sometimes it also includes your student number, your supervisor’s name, and the university’s logo.

Read more about title pages

The acknowledgements section is usually optional and gives space for you to thank everyone who helped you in writing your dissertation. This might include your supervisors, participants in your research, and friends or family who supported you. In some cases, your acknowledgements are part of a preface.

Read more about acknowledgements Read more about prefaces

Here's why students love Scribbr's proofreading services

Discover proofreading & editing

The abstract is a short summary of your dissertation, usually about 150 to 300 words long. Though this may seem very short, it’s one of the most important parts of your dissertation, because it introduces your work to your audience.

Your abstract should:

  • State your main topic and the aims of your research
  • Describe your methods
  • Summarize your main results
  • State your conclusions

Read more about abstracts

The table of contents lists all of your chapters, along with corresponding subheadings and page numbers. This gives your reader an overview of your structure and helps them easily navigate your document.

Remember to include all main parts of your dissertation in your table of contents, even the appendices. It’s easy to generate a table automatically in Word if you used heading styles. Generally speaking, you only include level 2 and level 3 headings, not every subheading you included in your finished work.

Read more about tables of contents

While not usually mandatory, it’s nice to include a list of figures and tables to help guide your reader if you have used a lot of these in your dissertation. It’s easy to generate one of these in Word using the Insert Caption feature.

Read more about lists of figures and tables

Similarly, if you have used a lot of abbreviations (especially industry-specific ones) in your dissertation, you can include them in an alphabetized list of abbreviations so that the reader can easily look up their meanings.

Read more about lists of abbreviations

In addition to the list of abbreviations, if you find yourself using a lot of highly specialized terms that you worry will not be familiar to your reader, consider including a glossary. Here, alphabetize the terms and include a brief description or definition.

Read more about glossaries

The introduction serves to set up your dissertation’s topic, purpose, and relevance. It tells the reader what to expect in the rest of your dissertation. The introduction should:

  • Establish your research topic , giving the background information needed to contextualize your work
  • Narrow down the focus and define the scope of your research
  • Discuss the state of existing research on the topic, showing your work’s relevance to a broader problem or debate
  • Clearly state your research questions and objectives
  • Outline the flow of the rest of your work

Everything in the introduction should be clear, engaging, and relevant. By the end, the reader should understand the what, why, and how of your research.

Read more about introductions

A formative part of your research is your literature review . This helps you gain a thorough understanding of the academic work that already exists on your topic.

Literature reviews encompass:

  • Finding relevant sources (e.g., books and journal articles)
  • Assessing the credibility of your sources
  • Critically analyzing and evaluating each source
  • Drawing connections between them (e.g., themes, patterns, conflicts, or gaps) to strengthen your overall point

A literature review is not merely a summary of existing sources. Your literature review should have a coherent structure and argument that leads to a clear justification for your own research. It may aim to:

  • Address a gap in the literature or build on existing knowledge
  • Take a new theoretical or methodological approach to your topic
  • Propose a solution to an unresolved problem or advance one side of a theoretical debate

Read more about literature reviews

Theoretical framework

Your literature review can often form the basis for your theoretical framework. Here, you define and analyze the key theories, concepts, and models that frame your research.

Read more about theoretical frameworks

Your methodology chapter describes how you conducted your research, allowing your reader to critically assess its credibility. Your methodology section should accurately report what you did, as well as convince your reader that this was the best way to answer your research question.

A methodology section should generally include:

  • The overall research approach ( quantitative vs. qualitative ) and research methods (e.g., a longitudinal study )
  • Your data collection methods (e.g., interviews or a controlled experiment )
  • Details of where, when, and with whom the research took place
  • Any tools and materials you used (e.g., computer programs, lab equipment)
  • Your data analysis methods (e.g., statistical analysis , discourse analysis )
  • An evaluation or justification of your methods

Read more about methodology sections

Your results section should highlight what your methodology discovered. You can structure this section around sub-questions, hypotheses , or themes, but avoid including any subjective or speculative interpretation here.

Your results section should:

  • Concisely state each relevant result together with relevant descriptive statistics (e.g., mean , standard deviation ) and inferential statistics (e.g., test statistics , p values )
  • Briefly state how the result relates to the question or whether the hypothesis was supported
  • Report all results that are relevant to your research questions , including any that did not meet your expectations.

Additional data (including raw numbers, full questionnaires, or interview transcripts) can be included as an appendix. You can include tables and figures, but only if they help the reader better understand your results. Read more about results sections

Your discussion section is your opportunity to explore the meaning and implications of your results in relation to your research question. Here, interpret your results in detail, discussing whether they met your expectations and how well they fit with the framework that you built in earlier chapters. Refer back to relevant source material to show how your results fit within existing research in your field.

Some guiding questions include:

  • What do your results mean?
  • Why do your results matter?
  • What limitations do the results have?

If any of the results were unexpected, offer explanations for why this might be. It’s a good idea to consider alternative interpretations of your data.

Read more about discussion sections

Your dissertation’s conclusion should concisely answer your main research question, leaving your reader with a clear understanding of your central argument and emphasizing what your research has contributed to the field.

In some disciplines, the conclusion is just a short section preceding the discussion section, but in other contexts, it is the final chapter of your work. Here, you wrap up your dissertation with a final reflection on what you found, with recommendations for future research and concluding remarks.

It’s important to leave the reader with a clear impression of why your research matters. What have you added to what was already known? Why is your research necessary for the future of your field?

Read more about conclusions

It is crucial to include a reference list or list of works cited with the full details of all the sources that you used, in order to avoid plagiarism. Be sure to choose one citation style and follow it consistently throughout your dissertation. Each style has strict and specific formatting requirements.

Common styles include MLA , Chicago , and APA , but which style you use is often set by your department or your field.

Create APA citations Create MLA citations

Your dissertation should contain only essential information that directly contributes to answering your research question. Documents such as interview transcripts or survey questions can be added as appendices, rather than adding them to the main body.

Read more about appendices

Making sure that all of your sections are in the right place is only the first step to a well-written dissertation. Don’t forget to leave plenty of time for editing and proofreading, as grammar mistakes and sloppy spelling errors can really negatively impact your work.

Dissertations can take up to five years to write, so you will definitely want to make sure that everything is perfect before submitting. You may want to consider using a professional dissertation editing service , AI proofreader or grammar checker to make sure your final project is perfect prior to submitting.

After your written dissertation is approved, your committee will schedule a defense. Similarly to defending your prospectus, dissertation defenses are oral presentations of your work. You’ll present your dissertation, and your committee will ask you questions. Many departments allow family members, friends, and other people who are interested to join as well.

After your defense, your committee will meet, and then inform you whether you have passed. Keep in mind that defenses are usually just a formality; most committees will have resolved any serious issues with your work with you far prior to your defense, giving you ample time to fix any problems.

As you write your dissertation, you can use this simple checklist to make sure you’ve included all the essentials.

Checklist: Dissertation

My title page includes all information required by my university.

I have included acknowledgements thanking those who helped me.

My abstract provides a concise summary of the dissertation, giving the reader a clear idea of my key results or arguments.

I have created a table of contents to help the reader navigate my dissertation. It includes all chapter titles, but excludes the title page, acknowledgements, and abstract.

My introduction leads into my topic in an engaging way and shows the relevance of my research.

My introduction clearly defines the focus of my research, stating my research questions and research objectives .

My introduction includes an overview of the dissertation’s structure (reading guide).

I have conducted a literature review in which I (1) critically engage with sources, evaluating the strengths and weaknesses of existing research, (2) discuss patterns, themes, and debates in the literature, and (3) address a gap or show how my research contributes to existing research.

I have clearly outlined the theoretical framework of my research, explaining the theories and models that support my approach.

I have thoroughly described my methodology , explaining how I collected data and analyzed data.

I have concisely and objectively reported all relevant results .

I have (1) evaluated and interpreted the meaning of the results and (2) acknowledged any important limitations of the results in my discussion .

I have clearly stated the answer to my main research question in the conclusion .

I have clearly explained the implications of my conclusion, emphasizing what new insight my research has contributed.

I have provided relevant recommendations for further research or practice.

If relevant, I have included appendices with supplemental information.

I have included an in-text citation every time I use words, ideas, or information from a source.

I have listed every source in a reference list at the end of my dissertation.

I have consistently followed the rules of my chosen citation style .

I have followed all formatting guidelines provided by my university.

Congratulations!

The end is in sight—your dissertation is nearly ready to submit! Make sure it's perfectly polished with the help of a Scribbr editor.

If you’re an educator, feel free to download and adapt these slides to teach your students about structuring a dissertation.

Open Google Slides Download PowerPoint

Is this article helpful?

Other students also liked.

  • How to Write a Literature Review | Guide, Examples, & Templates
  • Dissertation Table of Contents in Word | Instructions & Examples
  • How to Choose a Dissertation Topic | 8 Steps to Follow

More interesting articles

  • Checklist: Writing a dissertation
  • Dissertation & Thesis Outline | Example & Free Templates
  • Dissertation Binding and Printing | Options, Tips, & Comparison
  • Example of a dissertation abstract
  • Figure and Table Lists | Word Instructions, Template & Examples
  • How to Write a Discussion Section | Tips & Examples
  • How to Write a Dissertation or Thesis Proposal
  • How to Write a Results Section | Tips & Examples
  • How to Write a Thesis or Dissertation Conclusion
  • How to Write a Thesis or Dissertation Introduction
  • How to Write an Abstract | Steps & Examples
  • How to Write Recommendations in Research | Examples & Tips
  • List of Abbreviations | Example, Template & Best Practices
  • Operationalization | A Guide with Examples, Pros & Cons
  • Prize-Winning Thesis and Dissertation Examples
  • Purpose and structure of an advisory report
  • Relevance of Your Dissertation Topic | Criteria & Tips
  • Research Paper Appendix | Example & Templates
  • Shorten your abstract or summary
  • Theoretical Framework Example for a Thesis or Dissertation
  • Thesis & Dissertation Acknowledgements | Tips & Examples
  • Thesis & Dissertation Database Examples
  • Thesis & Dissertation Title Page | Free Templates & Examples
  • What is a Dissertation Preface? | Definition & Examples
  • What is a Glossary? | Definition, Templates, & Examples
  • What Is a Research Methodology? | Steps & Tips
  • What Is a Theoretical Framework? | Guide to Organizing
  • What Is a Thesis? | Ultimate Guide & Examples

What is your plagiarism score?

Have a language expert improve your writing

Run a free plagiarism check in 10 minutes, automatically generate references for free.

  • Knowledge Base
  • Dissertation

How to Write a Dissertation | A Guide to Structure & Content

A dissertation or thesis is a long piece of academic writing based on original research, submitted as part of an undergraduate or postgraduate degree.

The structure of a dissertation depends on your field, but it is usually divided into at least four or five chapters (including an introduction and conclusion chapter).

The most common dissertation structure in the sciences and social sciences includes:

  • An introduction to your topic
  • A literature review that surveys relevant sources
  • An explanation of your methodology
  • An overview of the results of your research
  • A discussion of the results and their implications
  • A conclusion that shows what your research has contributed

Dissertations in the humanities are often structured more like a long essay , building an argument by analysing primary and secondary sources . Instead of the standard structure outlined here, you might organise your chapters around different themes or case studies.

Other important elements of the dissertation include the title page , abstract , and reference list . If in doubt about how your dissertation should be structured, always check your department’s guidelines and consult with your supervisor.

Instantly correct all language mistakes in your text

Be assured that you'll submit flawless writing. Upload your document to correct all your mistakes.

upload-your-document-ai-proofreader

Table of contents

Acknowledgements, table of contents, list of figures and tables, list of abbreviations, introduction, literature review / theoretical framework, methodology, reference list.

The very first page of your document contains your dissertation’s title, your name, department, institution, degree program, and submission date. Sometimes it also includes your student number, your supervisor’s name, and the university’s logo. Many programs have strict requirements for formatting the dissertation title page .

The title page is often used as cover when printing and binding your dissertation .

The only proofreading tool specialized in correcting academic writing

The academic proofreading tool has been trained on 1000s of academic texts and by native English editors. Making it the most accurate and reliable proofreading tool for students.

how to write abstract dissertation

Correct my document today

The acknowledgements section is usually optional, and gives space for you to thank everyone who helped you in writing your dissertation. This might include your supervisors, participants in your research, and friends or family who supported you.

The abstract is a short summary of your dissertation, usually about 150-300 words long. You should write it at the very end, when you’ve completed the rest of the dissertation. In the abstract, make sure to:

  • State the main topic and aims of your research
  • Describe the methods you used
  • Summarise the main results
  • State your conclusions

Although the abstract is very short, it’s the first part (and sometimes the only part) of your dissertation that people will read, so it’s important that you get it right. If you’re struggling to write a strong abstract, read our guide on how to write an abstract .

In the table of contents, list all of your chapters and subheadings and their page numbers. The dissertation contents page gives the reader an overview of your structure and helps easily navigate the document.

All parts of your dissertation should be included in the table of contents, including the appendices. You can generate a table of contents automatically in Word.

Prevent plagiarism, run a free check.

If you have used a lot of tables and figures in your dissertation, you should itemise them in a numbered list . You can automatically generate this list using the Insert Caption feature in Word.

If you have used a lot of abbreviations in your dissertation, you can include them in an alphabetised list of abbreviations so that the reader can easily look up their meanings.

If you have used a lot of highly specialised terms that will not be familiar to your reader, it might be a good idea to include a glossary . List the terms alphabetically and explain each term with a brief description or definition.

In the introduction, you set up your dissertation’s topic, purpose, and relevance, and tell the reader what to expect in the rest of the dissertation. The introduction should:

  • Establish your research topic , giving necessary background information to contextualise your work
  • Narrow down the focus and define the scope of the research
  • Discuss the state of existing research on the topic, showing your work’s relevance to a broader problem or debate
  • Clearly state your objectives and research questions , and indicate how you will answer them
  • Give an overview of your dissertation’s structure

Everything in the introduction should be clear, engaging, and relevant to your research. By the end, the reader should understand the what , why and how of your research. Not sure how? Read our guide on how to write a dissertation introduction .

Before you start on your research, you should have conducted a literature review to gain a thorough understanding of the academic work that already exists on your topic. This means:

  • Collecting sources (e.g. books and journal articles) and selecting the most relevant ones
  • Critically evaluating and analysing each source
  • Drawing connections between them (e.g. themes, patterns, conflicts, gaps) to make an overall point

In the dissertation literature review chapter or section, you shouldn’t just summarise existing studies, but develop a coherent structure and argument that leads to a clear basis or justification for your own research. For example, it might aim to show how your research:

  • Addresses a gap in the literature
  • Takes a new theoretical or methodological approach to the topic
  • Proposes a solution to an unresolved problem
  • Advances a theoretical debate
  • Builds on and strengthens existing knowledge with new data

The literature review often becomes the basis for a theoretical framework , in which you define and analyse the key theories, concepts and models that frame your research. In this section you can answer descriptive research questions about the relationship between concepts or variables.

The methodology chapter or section describes how you conducted your research, allowing your reader to assess its validity. You should generally include:

  • The overall approach and type of research (e.g. qualitative, quantitative, experimental, ethnographic)
  • Your methods of collecting data (e.g. interviews, surveys, archives)
  • Details of where, when, and with whom the research took place
  • Your methods of analysing data (e.g. statistical analysis, discourse analysis)
  • Tools and materials you used (e.g. computer programs, lab equipment)
  • A discussion of any obstacles you faced in conducting the research and how you overcame them
  • An evaluation or justification of your methods

Your aim in the methodology is to accurately report what you did, as well as convincing the reader that this was the best approach to answering your research questions or objectives.

Next, you report the results of your research . You can structure this section around sub-questions, hypotheses, or topics. Only report results that are relevant to your objectives and research questions. In some disciplines, the results section is strictly separated from the discussion, while in others the two are combined.

For example, for qualitative methods like in-depth interviews, the presentation of the data will often be woven together with discussion and analysis, while in quantitative and experimental research, the results should be presented separately before you discuss their meaning. If you’re unsure, consult with your supervisor and look at sample dissertations to find out the best structure for your research.

In the results section it can often be helpful to include tables, graphs and charts. Think carefully about how best to present your data, and don’t include tables or figures that just repeat what you have written  –  they should provide extra information or usefully visualise the results in a way that adds value to your text.

Full versions of your data (such as interview transcripts) can be included as an appendix .

The discussion  is where you explore the meaning and implications of your results in relation to your research questions. Here you should interpret the results in detail, discussing whether they met your expectations and how well they fit with the framework that you built in earlier chapters. If any of the results were unexpected, offer explanations for why this might be. It’s a good idea to consider alternative interpretations of your data and discuss any limitations that might have influenced the results.

The discussion should reference other scholarly work to show how your results fit with existing knowledge. You can also make recommendations for future research or practical action.

The dissertation conclusion should concisely answer the main research question, leaving the reader with a clear understanding of your central argument. Wrap up your dissertation with a final reflection on what you did and how you did it. The conclusion often also includes recommendations for research or practice.

In this section, it’s important to show how your findings contribute to knowledge in the field and why your research matters. What have you added to what was already known?

You must include full details of all sources that you have cited in a reference list (sometimes also called a works cited list or bibliography). It’s important to follow a consistent reference style . Each style has strict and specific requirements for how to format your sources in the reference list.

The most common styles used in UK universities are Harvard referencing and Vancouver referencing . Your department will often specify which referencing style you should use – for example, psychology students tend to use APA style , humanities students often use MHRA , and law students always use OSCOLA . M ake sure to check the requirements, and ask your supervisor if you’re unsure.

To save time creating the reference list and make sure your citations are correctly and consistently formatted, you can use our free APA Citation Generator .

Your dissertation itself should contain only essential information that directly contributes to answering your research question. Documents you have used that do not fit into the main body of your dissertation (such as interview transcripts, survey questions or tables with full figures) can be added as appendices .

Is this article helpful?

Other students also liked.

  • What Is a Dissertation? | 5 Essential Questions to Get Started
  • What is a Literature Review? | Guide, Template, & Examples
  • How to Write a Dissertation Proposal | A Step-by-Step Guide

More interesting articles

  • Checklist: Writing a dissertation
  • Dissertation & Thesis Outline | Example & Free Templates
  • Dissertation binding and printing
  • Dissertation Table of Contents in Word | Instructions & Examples
  • Dissertation title page
  • Example Theoretical Framework of a Dissertation or Thesis
  • Figure & Table Lists | Word Instructions, Template & Examples
  • How to Choose a Dissertation Topic | 8 Steps to Follow
  • How to Write a Discussion Section | Tips & Examples
  • How to Write a Results Section | Tips & Examples
  • How to Write a Thesis or Dissertation Conclusion
  • How to Write a Thesis or Dissertation Introduction
  • How to Write an Abstract | Steps & Examples
  • How to Write Recommendations in Research | Examples & Tips
  • List of Abbreviations | Example, Template & Best Practices
  • Operationalisation | A Guide with Examples, Pros & Cons
  • Prize-Winning Thesis and Dissertation Examples
  • Relevance of Your Dissertation Topic | Criteria & Tips
  • Research Paper Appendix | Example & Templates
  • Thesis & Dissertation Acknowledgements | Tips & Examples
  • Thesis & Dissertation Database Examples
  • What is a Dissertation Preface? | Definition & Examples
  • What is a Glossary? | Definition, Templates, & Examples
  • What Is a Research Methodology? | Steps & Tips
  • What is a Theoretical Framework? | A Step-by-Step Guide
  • What Is a Thesis? | Ultimate Guide & Examples

Grad Coach

Dissertation Structure & Layout 101: How to structure your dissertation, thesis or research project.

By: Derek Jansen (MBA) Reviewed By: David Phair (PhD) | July 2019

So, you’ve got a decent understanding of what a dissertation is , you’ve chosen your topic and hopefully you’ve received approval for your research proposal . Awesome! Now its time to start the actual dissertation or thesis writing journey.

To craft a high-quality document, the very first thing you need to understand is dissertation structure . In this post, we’ll walk you through the generic dissertation structure and layout, step by step. We’ll start with the big picture, and then zoom into each chapter to briefly discuss the core contents. If you’re just starting out on your research journey, you should start with this post, which covers the big-picture process of how to write a dissertation or thesis .

Dissertation structure and layout - the basics

*The Caveat *

In this post, we’ll be discussing a traditional dissertation/thesis structure and layout, which is generally used for social science research across universities, whether in the US, UK, Europe or Australia. However, some universities may have small variations on this structure (extra chapters, merged chapters, slightly different ordering, etc).

So, always check with your university if they have a prescribed structure or layout that they expect you to work with. If not, it’s safe to assume the structure we’ll discuss here is suitable. And even if they do have a prescribed structure, you’ll still get value from this post as we’ll explain the core contents of each section.  

Overview: S tructuring a dissertation or thesis

  • Acknowledgements page
  • Abstract (or executive summary)
  • Table of contents , list of figures and tables
  • Chapter 1: Introduction
  • Chapter 2: Literature review
  • Chapter 3: Methodology
  • Chapter 4: Results
  • Chapter 5: Discussion
  • Chapter 6: Conclusion
  • Reference list

As I mentioned, some universities will have slight variations on this structure. For example, they want an additional “personal reflection chapter”, or they might prefer the results and discussion chapter to be merged into one. Regardless, the overarching flow will always be the same, as this flow reflects the research process , which we discussed here – i.e.:

  • The introduction chapter presents the core research question and aims .
  • The literature review chapter assesses what the current research says about this question.
  • The methodology, results and discussion chapters go about undertaking new research about this question.
  • The conclusion chapter (attempts to) answer the core research question .

In other words, the dissertation structure and layout reflect the research process of asking a well-defined question(s), investigating, and then answering the question – see below.

A dissertation's structure reflect the research process

To restate that – the structure and layout of a dissertation reflect the flow of the overall research process . This is essential to understand, as each chapter will make a lot more sense if you “get” this concept. If you’re not familiar with the research process, read this post before going further.

Right. Now that we’ve covered the big picture, let’s dive a little deeper into the details of each section and chapter. Oh and by the way, you can also grab our free dissertation/thesis template here to help speed things up.

The title page of your dissertation is the very first impression the marker will get of your work, so it pays to invest some time thinking about your title. But what makes for a good title? A strong title needs to be 3 things:

  • Succinct (not overly lengthy or verbose)
  • Specific (not vague or ambiguous)
  • Representative of the research you’re undertaking (clearly linked to your research questions)

Typically, a good title includes mention of the following:

  • The broader area of the research (i.e. the overarching topic)
  • The specific focus of your research (i.e. your specific context)
  • Indication of research design (e.g. quantitative , qualitative , or  mixed methods ).

For example:

A quantitative investigation [research design] into the antecedents of organisational trust [broader area] in the UK retail forex trading market [specific context/area of focus].

Again, some universities may have specific requirements regarding the format and structure of the title, so it’s worth double-checking expectations with your institution (if there’s no mention in the brief or study material).

Dissertations stacked up

Acknowledgements

This page provides you with an opportunity to say thank you to those who helped you along your research journey. Generally, it’s optional (and won’t count towards your marks), but it is academic best practice to include this.

So, who do you say thanks to? Well, there’s no prescribed requirements, but it’s common to mention the following people:

  • Your dissertation supervisor or committee.
  • Any professors, lecturers or academics that helped you understand the topic or methodologies.
  • Any tutors, mentors or advisors.
  • Your family and friends, especially spouse (for adult learners studying part-time).

There’s no need for lengthy rambling. Just state who you’re thankful to and for what (e.g. thank you to my supervisor, John Doe, for his endless patience and attentiveness) – be sincere. In terms of length, you should keep this to a page or less.

Abstract or executive summary

The dissertation abstract (or executive summary for some degrees) serves to provide the first-time reader (and marker or moderator) with a big-picture view of your research project. It should give them an understanding of the key insights and findings from the research, without them needing to read the rest of the report – in other words, it should be able to stand alone .

For it to stand alone, your abstract should cover the following key points (at a minimum):

  • Your research questions and aims – what key question(s) did your research aim to answer?
  • Your methodology – how did you go about investigating the topic and finding answers to your research question(s)?
  • Your findings – following your own research, what did do you discover?
  • Your conclusions – based on your findings, what conclusions did you draw? What answers did you find to your research question(s)?

So, in much the same way the dissertation structure mimics the research process, your abstract or executive summary should reflect the research process, from the initial stage of asking the original question to the final stage of answering that question.

In practical terms, it’s a good idea to write this section up last , once all your core chapters are complete. Otherwise, you’ll end up writing and rewriting this section multiple times (just wasting time). For a step by step guide on how to write a strong executive summary, check out this post .

Need a helping hand?

how to write abstract dissertation

Table of contents

This section is straightforward. You’ll typically present your table of contents (TOC) first, followed by the two lists – figures and tables. I recommend that you use Microsoft Word’s automatic table of contents generator to generate your TOC. If you’re not familiar with this functionality, the video below explains it simply:

If you find that your table of contents is overly lengthy, consider removing one level of depth. Oftentimes, this can be done without detracting from the usefulness of the TOC.

Right, now that the “admin” sections are out of the way, its time to move on to your core chapters. These chapters are the heart of your dissertation and are where you’ll earn the marks. The first chapter is the introduction chapter – as you would expect, this is the time to introduce your research…

It’s important to understand that even though you’ve provided an overview of your research in your abstract, your introduction needs to be written as if the reader has not read that (remember, the abstract is essentially a standalone document). So, your introduction chapter needs to start from the very beginning, and should address the following questions:

  • What will you be investigating (in plain-language, big picture-level)?
  • Why is that worth investigating? How is it important to academia or business? How is it sufficiently original?
  • What are your research aims and research question(s)? Note that the research questions can sometimes be presented at the end of the literature review (next chapter).
  • What is the scope of your study? In other words, what will and won’t you cover ?
  • How will you approach your research? In other words, what methodology will you adopt?
  • How will you structure your dissertation? What are the core chapters and what will you do in each of them?

These are just the bare basic requirements for your intro chapter. Some universities will want additional bells and whistles in the intro chapter, so be sure to carefully read your brief or consult your research supervisor.

If done right, your introduction chapter will set a clear direction for the rest of your dissertation. Specifically, it will make it clear to the reader (and marker) exactly what you’ll be investigating, why that’s important, and how you’ll be going about the investigation. Conversely, if your introduction chapter leaves a first-time reader wondering what exactly you’ll be researching, you’ve still got some work to do.

Now that you’ve set a clear direction with your introduction chapter, the next step is the literature review . In this section, you will analyse the existing research (typically academic journal articles and high-quality industry publications), with a view to understanding the following questions:

  • What does the literature currently say about the topic you’re investigating?
  • Is the literature lacking or well established? Is it divided or in disagreement?
  • How does your research fit into the bigger picture?
  • How does your research contribute something original?
  • How does the methodology of previous studies help you develop your own?

Depending on the nature of your study, you may also present a conceptual framework towards the end of your literature review, which you will then test in your actual research.

Again, some universities will want you to focus on some of these areas more than others, some will have additional or fewer requirements, and so on. Therefore, as always, its important to review your brief and/or discuss with your supervisor, so that you know exactly what’s expected of your literature review chapter.

Dissertation writing

Now that you’ve investigated the current state of knowledge in your literature review chapter and are familiar with the existing key theories, models and frameworks, its time to design your own research. Enter the methodology chapter – the most “science-ey” of the chapters…

In this chapter, you need to address two critical questions:

  • Exactly HOW will you carry out your research (i.e. what is your intended research design)?
  • Exactly WHY have you chosen to do things this way (i.e. how do you justify your design)?

Remember, the dissertation part of your degree is first and foremost about developing and demonstrating research skills . Therefore, the markers want to see that you know which methods to use, can clearly articulate why you’ve chosen then, and know how to deploy them effectively.

Importantly, this chapter requires detail – don’t hold back on the specifics. State exactly what you’ll be doing, with who, when, for how long, etc. Moreover, for every design choice you make, make sure you justify it.

In practice, you will likely end up coming back to this chapter once you’ve undertaken all your data collection and analysis, and revise it based on changes you made during the analysis phase. This is perfectly fine. Its natural for you to add an additional analysis technique, scrap an old one, etc based on where your data lead you. Of course, I’m talking about small changes here – not a fundamental switch from qualitative to quantitative, which will likely send your supervisor in a spin!

You’ve now collected your data and undertaken your analysis, whether qualitative, quantitative or mixed methods. In this chapter, you’ll present the raw results of your analysis . For example, in the case of a quant study, you’ll present the demographic data, descriptive statistics, inferential statistics , etc.

Typically, Chapter 4 is simply a presentation and description of the data, not a discussion of the meaning of the data. In other words, it’s descriptive, rather than analytical – the meaning is discussed in Chapter 5. However, some universities will want you to combine chapters 4 and 5, so that you both present and interpret the meaning of the data at the same time. Check with your institution what their preference is.

Now that you’ve presented the data analysis results, its time to interpret and analyse them. In other words, its time to discuss what they mean, especially in relation to your research question(s).

What you discuss here will depend largely on your chosen methodology. For example, if you’ve gone the quantitative route, you might discuss the relationships between variables . If you’ve gone the qualitative route, you might discuss key themes and the meanings thereof. It all depends on what your research design choices were.

Most importantly, you need to discuss your results in relation to your research questions and aims, as well as the existing literature. What do the results tell you about your research questions? Are they aligned with the existing research or at odds? If so, why might this be? Dig deep into your findings and explain what the findings suggest, in plain English.

The final chapter – you’ve made it! Now that you’ve discussed your interpretation of the results, its time to bring it back to the beginning with the conclusion chapter . In other words, its time to (attempt to) answer your original research question s (from way back in chapter 1). Clearly state what your conclusions are in terms of your research questions. This might feel a bit repetitive, as you would have touched on this in the previous chapter, but its important to bring the discussion full circle and explicitly state your answer(s) to the research question(s).

Dissertation and thesis prep

Next, you’ll typically discuss the implications of your findings? In other words, you’ve answered your research questions – but what does this mean for the real world (or even for academia)? What should now be done differently, given the new insight you’ve generated?

Lastly, you should discuss the limitations of your research, as well as what this means for future research in the area. No study is perfect, especially not a Masters-level. Discuss the shortcomings of your research. Perhaps your methodology was limited, perhaps your sample size was small or not representative, etc, etc. Don’t be afraid to critique your work – the markers want to see that you can identify the limitations of your work. This is a strength, not a weakness. Be brutal!

This marks the end of your core chapters – woohoo! From here on out, it’s pretty smooth sailing.

The reference list is straightforward. It should contain a list of all resources cited in your dissertation, in the required format, e.g. APA , Harvard, etc.

It’s essential that you use reference management software for your dissertation. Do NOT try handle your referencing manually – its far too error prone. On a reference list of multiple pages, you’re going to make mistake. To this end, I suggest considering either Mendeley or Zotero. Both are free and provide a very straightforward interface to ensure that your referencing is 100% on point. I’ve included a simple how-to video for the Mendeley software (my personal favourite) below:

Some universities may ask you to include a bibliography, as opposed to a reference list. These two things are not the same . A bibliography is similar to a reference list, except that it also includes resources which informed your thinking but were not directly cited in your dissertation. So, double-check your brief and make sure you use the right one.

The very last piece of the puzzle is the appendix or set of appendices. This is where you’ll include any supporting data and evidence. Importantly, supporting is the keyword here.

Your appendices should provide additional “nice to know”, depth-adding information, which is not critical to the core analysis. Appendices should not be used as a way to cut down word count (see this post which covers how to reduce word count ). In other words, don’t place content that is critical to the core analysis here, just to save word count. You will not earn marks on any content in the appendices, so don’t try to play the system!

Time to recap…

And there you have it – the traditional dissertation structure and layout, from A-Z. To recap, the core structure for a dissertation or thesis is (typically) as follows:

  • Acknowledgments page

Most importantly, the core chapters should reflect the research process (asking, investigating and answering your research question). Moreover, the research question(s) should form the golden thread throughout your dissertation structure. Everything should revolve around the research questions, and as you’ve seen, they should form both the start point (i.e. introduction chapter) and the endpoint (i.e. conclusion chapter).

I hope this post has provided you with clarity about the traditional dissertation/thesis structure and layout. If you have any questions or comments, please leave a comment below, or feel free to get in touch with us. Also, be sure to check out the rest of the  Grad Coach Blog .

how to write abstract dissertation

Psst… there’s more (for free)

This post is part of our dissertation mini-course, which covers everything you need to get started with your dissertation, thesis or research project. 

You Might Also Like:

Dissertation and thesis defense 101

36 Comments

ARUN kumar SHARMA

many thanks i found it very useful

Derek Jansen

Glad to hear that, Arun. Good luck writing your dissertation.

Sue

Such clear practical logical advice. I very much needed to read this to keep me focused in stead of fretting.. Perfect now ready to start my research!

hayder

what about scientific fields like computer or engineering thesis what is the difference in the structure? thank you very much

Tim

Thanks so much this helped me a lot!

Ade Adeniyi

Very helpful and accessible. What I like most is how practical the advice is along with helpful tools/ links.

Thanks Ade!

Aswathi

Thank you so much sir.. It was really helpful..

You’re welcome!

Jp Raimundo

Hi! How many words maximum should contain the abstract?

Karmelia Renatee

Thank you so much 😊 Find this at the right moment

You’re most welcome. Good luck with your dissertation.

moha

best ever benefit i got on right time thank you

Krishnan iyer

Many times Clarity and vision of destination of dissertation is what makes the difference between good ,average and great researchers the same way a great automobile driver is fast with clarity of address and Clear weather conditions .

I guess Great researcher = great ideas + knowledge + great and fast data collection and modeling + great writing + high clarity on all these

You have given immense clarity from start to end.

Alwyn Malan

Morning. Where will I write the definitions of what I’m referring to in my report?

Rose

Thank you so much Derek, I was almost lost! Thanks a tonnnn! Have a great day!

yemi Amos

Thanks ! so concise and valuable

Kgomotso Siwelane

This was very helpful. Clear and concise. I know exactly what to do now.

dauda sesay

Thank you for allowing me to go through briefly. I hope to find time to continue.

Patrick Mwathi

Really useful to me. Thanks a thousand times

Adao Bundi

Very interesting! It will definitely set me and many more for success. highly recommended.

SAIKUMAR NALUMASU

Thank you soo much sir, for the opportunity to express my skills

mwepu Ilunga

Usefull, thanks a lot. Really clear

Rami

Very nice and easy to understand. Thank you .

Chrisogonas Odhiambo

That was incredibly useful. Thanks Grad Coach Crew!

Luke

My stress level just dropped at least 15 points after watching this. Just starting my thesis for my grad program and I feel a lot more capable now! Thanks for such a clear and helpful video, Emma and the GradCoach team!

Judy

Do we need to mention the number of words the dissertation contains in the main document?

It depends on your university’s requirements, so it would be best to check with them 🙂

Christine

Such a helpful post to help me get started with structuring my masters dissertation, thank you!

Simon Le

Great video; I appreciate that helpful information

Brhane Kidane

It is so necessary or avital course

johnson

This blog is very informative for my research. Thank you

avc

Doctoral students are required to fill out the National Research Council’s Survey of Earned Doctorates

Emmanuel Manjolo

wow this is an amazing gain in my life

Paul I Thoronka

This is so good

Tesfay haftu

How can i arrange my specific objectives in my dissertation?

Trackbacks/Pingbacks

  • What Is A Literature Review (In A Dissertation Or Thesis) - Grad Coach - […] is to write the actual literature review chapter (this is usually the second chapter in a typical dissertation or…

Submit a Comment Cancel reply

Your email address will not be published. Required fields are marked *

Save my name, email, and website in this browser for the next time I comment.

  • Print Friendly

how to write abstract dissertation

Writing the Dissertation - Guides for Success: The Abstract

  • Writing the Dissertation Homepage
  • Overview and Planning
  • The Literature Review
  • The Methodology
  • The Results and Discussion
  • The Conclusion
  • The Abstract
  • An abstract is a brief summary of an academic text.
  • Researchers use abstracts to make an informed decision of whether an article, dissertation or other academic text is relevant or applicable to their own work.
  • Conventions for the content and structure of abstracts vary by field, so general guidance should be adjusted to match best practices of published writers in your discipline.

What is an abstract?

An  abstract  is a concise summary of an academic text such as a journal article, dissertation or thesis. It provides a 'snapshot' view of the overall text, from the research question through to the conclusion.

In thinking about how to write an abstract, it's helpful to consider why we  read  abstracts. We usually encounter abstracts while searching databases for articles to reference in our own research. Before we commit to reading the full-text of an article, we want to gauge whether that article will make a relevant contribution to our work or thinking. The abstract helps us make that decision by providing a quick, 'boiled down' preview of the entire piece.

In that sense, an abstract of an academic text can be likened to the trailer for a movie. Just as a movie trailer informs your choice to see or skip a certain film, an abstract can inform your choice to read or skip an academic text. However, unlike a movie trailer, an abstract  should  contain 'spoilers' (i.e., the key conclusions of the writing).

Standard criteria for an abstract

  • Word count  –   The average abstract is about 200 words, but you should adjust this figure to match the context in which you are writing. For example, if submitting an article to a journal, you should follow that journal's publishing guidelines. Similarly, your school/faculty may suggest a word count for dissertation abstracts.
  • Able to stand alone  – A reader should understand the key elements of your research or argument from the abstract itself. In other words, the abstract should make sense as an independent piece of writing even to those who haven't read the report/research that follows.
  • Audience aware  – Because the main audience for your abstract will be other researchers in your field, you can use discipline-specific jargon or language as needed. You only need to 'rein in' the specialist language if you are writing for the general public rather than fellow researchers.

As a rule of thumb, the abstract will mirror the structure of the piece of writing that it is summarising. However, it will compress the 'main beats' into a single paragraph (rarely will an abstract be formatted as more than one paragraph). Therefore, one common structure for an abstract is as follows:

  • Context  – Relevant research background (think of this like a literature review condensed into one or two sentences).
  • Objective statement/research question  – What your research aims to do and/or what it sets out to answer.
  • Methodology  – How your research was carried out (cut the minute detail and stick to broad strokes).
  • Results  – What your methodology produced.
  • Discussion  – Interpretation of your results, often in relation to the wider discourse or prior research.
  • Implications/future research  – If relevant, an indication of your research's impact and/or suggestions for future study.
  • Conclusion  – The takeaway or answer to the question, 'So what?'

Our Writing Abstracts video provides examples and explanations of how abstracts vary between academic disciplines (e.g. humanities, sciences, social sciences, arts, etc.), so please check it out to explore expectations in your subject area.  Our  Writing Across Subjects guide  provides further guidance for some fields.

The writing process

  • Don't be afraid to overwrite, first.  You can always cut back, cut back, and cut back some more, so when writing your first draft of the abstract, don't worry about the word count.
  • Pare anything superfluous.  Edit ruthlessly once you have that first draft. Treat adverbs with suspicion ('strongly suggests' = 'suggests', 'carefully analysed' = 'analysed', and so on). Use a thesaurus or phrase dictionary to find one-word substitutes for multi-word phrases. Be prepared to go through many rounds of culling!
  • Share it.  Get someone unfamiliar with your research to read your abstract and then explain your project back to you. If this exercise goes well, you are on the right track.
  • What/why/who/how?  You can produce a starting place for your abstract by answering these questions: what did you do; why did you do it; who else is doing similar things; how did you do it? Imagine someone has asked the questions in a lift – therefore, you have to keep your answers brief (i.e., a literal 'elevator pitch' of your work).

Abstracts for dissertations and theses

The above guidance all applies when writing the abstract for your dissertation or thesis. Remember to keep your subject area in mind and tailor your abstract to the expectations of your discipline.

The university provides Word templates to help you format your entire submission, including a dedicated page for your abstract. Access the dissertation template here, or access the  thesis template here.

For help producing the other sections of a long academic work, check out our Writing the Dissertation: Guides for Success resources,   which include guides, video workshops, checklists and more.

Decorative

  • << Previous: The Conclusion
  • Last Updated: Feb 22, 2024 3:43 PM
  • URL: https://library.soton.ac.uk/writing_the_dissertation
  • EXPLORE Random Article

How to Write a Dissertation Abstract

Last Updated: March 6, 2020 References

wikiHow is a “wiki,” similar to Wikipedia, which means that many of our articles are co-written by multiple authors. To create this article, volunteer authors worked to edit and improve it over time. This article has been viewed 23,121 times.

An abstract is a small summary of a larger paper. A dissertation is a long research paper with an original argument that you must write to graduate with a Master’s degree or doctorate. An abstract helps give your reader a map of your paper before he or she reads it. It also helps researchers to know if your paper will be helpful to them before they expend time reading it. Therefore, you should try to write as clear an abstract as possible, in simple and concise language.

Including the Necessary Information

Step 1 Write an outline of your dissertation if you have not already done so.

  • Start with your main thesis at the top.
  • Next, read each section of your paper. As you read, write a one-sentence summary of each major chapter or section. Keep them in order on your paper. Regardless of your discipline, take time to point out the key theorists in the discipline you’ll be exploring in your paper.
  • Include a summary of your conclusions, as well.
  • If you’re writing an abstract for a scientific dissertation, it’s not necessary to include all of your literature review; however, you might include a sentence on how your paper fits into the larger academic discussion.

Step 2 Gather the information you will need for a science abstract.

  • Discuss how your research fits into the larger academic discussion.
  • Talk about your methodology.
  • Include your conclusions.
  • Take time to discuss how it could lead to further research.

Step 3 Include the correct information for a humanities abstract.

  • Include any major works you’re analyzing. In other words, provide a short discussion of the source material, whether it’s the diaries of a famous historical figure for a history dissertation, a work of literature, a piece of music, or a great work of art.
  • Discuss the major theories you’re applying to make your argument.
  • Cover your main argument.
  • Talk about your conclusions.

Step 4 Know what to include in a social science abstract.

  • Include any methodology you used to conduct research.
  • Provide an overview of any studies you conducted, including participants and the purpose of the study.
  • Discuss major theories that you are using for analyzing your work, as well as how your research fits into the larger discussion. Remember to keep it brief.
  • Don’t forget to discuss your conclusions, as well as how your research could lead to further research.

Step 5 Prepare your information for a business abstract.

  • Include major theories you are using to analyze your research.
  • Talk about your research methods, especially if you are collecting data.
  • Provide specifics if you are looking at a particular company or analyzing a particular model.
  • Discuss your overall conclusions.

Writing Your Abstract

Step 1 Start by writing the full citation for the paper.

  • The name of the article you have written.
  • Publication information, if there is any.

Step 2 Begin with a condensed version of your thesis.

  • Remember, you’re just trying to give your reader an overview of your dissertation, not every detail.

Step 3 Write in the sentences from your outline.

  • You should also include the sentence about your conclusion.

Step 4 Read through your abstract and add transitions to make it easy to follow.

  • Remember, you are not just summarizing your individual thoughts in your abstract, you are recreating the argument you make in your paper in a shortened form.

Step 5 Make sure to include information that is specific to your discipline.

  • For instance, if you’re an archaeologist, you need to reference your primary materials.
  • If you’re a librarian, you should talk about the methods you’ve used to collect your research.
  • If you’re a psychologist, talk about the way you conducted your study.

Step 6 Edit your abstract to make it short and concise.

  • Only include information that is in the paper; do not bring new ideas into the abstract.

Step 7 Double check that your abstract includes the most important information contained in your paper.

  • The way you implement your research in science includes methodology (how you carried out your experiment), but in a humanities paper, you’ll likely be talking about the theories you applied in your research (such as applying Foucault’s theories to a book like Wuthering Heights).

Step 8 Keep the reader in mind.

Expert Q&A

  • If you wrote a scientific, sociological, or psychological dissertation (or any other type of dissertation requiring field research), be sure to include information on your methodology. Thanks Helpful 0 Not Helpful 0
  • If you’re writing an abstract on a literature paper, be sure to include the major works you’re reviewing. Thanks Helpful 0 Not Helpful 0
  • You can use some technical language if it is a technical paper. Thanks Helpful 0 Not Helpful 0

You Might Also Like

Ask for Feedback

  • ↑ http://www.sciencebuddies.org/science-fair-projects/project_abstract.shtml
  • ↑ http://writingcenter.unc.edu/handouts/abstracts/
  • ↑ http://libguides.usc.edu/content.php?pid=83009&sid=621164
  • ↑ http://librarybissell.act.edu/content.php?pid=136789&sid=1171531
  • ↑ http://users.ece.cmu.edu/~koopman/essays/abstract.html
  • ↑ https://owl.english.purdue.edu/owl/resource/656/01/

About this article

To write a dissertation abstract, start with a condensed version of your thesis that's no more than 1 sentence long. Then, include sentences about the methodology you used for your research and any major points or theories you analyzed. You should also include a sentence about the conclusions you drew based on your research. In general, try to keep your dissertation abstract between 100 and 200 words. To learn how to use an outline of your dissertation to write your abstract, keep reading! Did this summary help you? Yes No

Did this article help you?

Ask for Feedback

  • About wikiHow
  • Terms of Use
  • Privacy Policy
  • Do Not Sell or Share My Info
  • Not Selling Info

How to Write an Abstract APA Format

Saul Mcleod, PhD

Editor-in-Chief for Simply Psychology

BSc (Hons) Psychology, MRes, PhD, University of Manchester

Saul Mcleod, Ph.D., is a qualified psychology teacher with over 18 years experience of working in further and higher education. He has been published in peer-reviewed journals, including the Journal of Clinical Psychology.

Learn about our Editorial Process

Olivia Guy-Evans, MSc

Associate Editor for Simply Psychology

BSc (Hons) Psychology, MSc Psychology of Education

Olivia Guy-Evans is a writer and associate editor for Simply Psychology. She has previously worked in healthcare and educational sectors.

An APA abstract is a brief, comprehensive summary of the contents of an article, research paper, dissertation, or report.

It is written in accordance with the guidelines of the American Psychological Association (APA), which is a widely used format in social and behavioral sciences. 

An APA abstract summarizes, usually in one paragraph of between 150–250 words, the major aspects of a research paper or dissertation in a prescribed sequence that includes:
  • The rationale: the overall purpose of the study, providing a clear context for the research undertaken.
  • Information regarding the method and participants: including materials/instruments, design, procedure, and data analysis.
  • Main findings or trends: effectively highlighting the key outcomes of the hypotheses.
  • Interpretations and conclusion(s): solidify the implications of the research.
  • Keywords related to the study: assist the paper’s discoverability in academic databases.

The abstract should stand alone, be “self-contained,” and make sense to the reader in isolation from the main article.

The purpose of the abstract is to give the reader a quick overview of the essential information before reading the entire article. The abstract is placed on its own page, directly after the title page and before the main body of the paper.

Although the abstract will appear as the very first part of your paper, it’s good practice to write your abstract after you’ve drafted your full paper, so that you know what you’re summarizing.

Note : This page reflects the latest version of the APA Publication Manual (i.e., APA 7), released in October 2019.

Structure of the Abstract

[NOTE: DO NOT separate the components of the abstract – it should be written as a single paragraph. This section is separated to illustrate the abstract’s structure.]

1) The Rationale

One or two sentences describing the overall purpose of the study and the research problem(s) you investigated. You are basically justifying why this study was conducted.

  • What is the importance of the research?
  • Why would a reader be interested in the larger work?
  • For example, are you filling a gap in previous research or applying new methods to take a fresh look at existing ideas or data?
  • Women who are diagnosed with breast cancer can experience an array of psychosocial difficulties; however, social support, particularly from a spouse, has been shown to have a protective function during this time. This study examined the ways in which a woman’s daily mood, pain, and fatigue, and her spouse’s marital satisfaction predict the woman’s report of partner support in the context of breast cancer.
  • The current nursing shortage, high hospital nurse job dissatisfaction, and reports of uneven quality of hospital care are not uniquely American phenomena.
  • Students with special educational needs and disabilities (SEND) are more likely to exhibit behavioral difficulties than their typically developing peers. The aim of this study was to identify specific risk factors that influence variability in behavior difficulties among individuals with SEND.

2) The Method

Information regarding the participants (number, and population). One or two sentences outlining the method, explaining what was done and how. The method is described in the present tense.

  • Pretest data from a larger intervention study and multilevel modeling were used to examine the effects of women’s daily mood, pain, and fatigue and average levels of mood, pain, and fatigue on women’s report of social support received from her partner, as well as how the effects of mood interacted with partners’ marital satisfaction.
  • This paper presents reports from 43,000 nurses from more than 700 hospitals in the United States, Canada, England, Scotland, and Germany in 1998–1999.
  • The study sample comprised 4,228 students with SEND, aged 5–15, drawn from 305 primary and secondary schools across England. Explanatory variables were measured at the individual and school levels at baseline, along with a teacher-reported measure of behavior difficulties (assessed at baseline and the 18-month follow-up).

3) The Results

One or two sentences indicating the main findings or trends found as a result of your analysis. The results are described in the present or past tense.

  • Results show that on days in which women reported higher levels of negative or positive mood, as well as on days they reported more pain and fatigue, they reported receiving more support. Women who, on average, reported higher levels of positive mood tended to report receiving more support than those who, on average, reported lower positive mood. However, average levels of negative mood were not associated with support. Higher average levels of fatigue but not pain were associated with higher support. Finally, women whose husbands reported higher levels of marital satisfaction reported receiving more partner support, but husbands’ marital satisfaction did not moderate the effect of women’s mood on support.
  • Nurses in countries with distinctly different healthcare systems report similar shortcomings in their work environments and the quality of hospital care. While the competence of and relation between nurses and physicians appear satisfactory, core problems in work design and workforce management threaten the provision of care.
  • Hierarchical linear modeling of data revealed that differences between schools accounted for between 13% (secondary) and 15.4% (primary) of the total variance in the development of students’ behavior difficulties, with the remainder attributable to individual differences. Statistically significant risk markers for these problems across both phases of education were being male, eligibility for free school meals, being identified as a bully, and lower academic achievement. Additional risk markers specific to each phase of education at the individual and school levels are also acknowledged.

4) The Conclusion / Implications

A brief summary of your conclusions and implications of the results, described in the present tense. Explain the results and why the study is important to the reader.

  • For example, what changes should be implemented as a result of the findings of the work?
  • How does this work add to the body of knowledge on the topic?

Implications of these findings are discussed relative to assisting couples during this difficult time in their lives.

  • Resolving these issues, which are amenable to managerial intervention, is essential to preserving patient safety and care of consistently high quality.
  • Behavior difficulties are affected by risks across multiple ecological levels. Addressing any one of these potential influences is therefore likely to contribute to the reduction in the problems displayed.

The above examples of abstracts are from the following papers:

Aiken, L. H., Clarke, S. P., Sloane, D. M., Sochalski, J. A., Busse, R., Clarke, H., … & Shamian, J. (2001). Nurses’ reports on hospital care in five countries . Health affairs, 20(3) , 43-53.

Boeding, S. E., Pukay-Martin, N. D., Baucom, D. H., Porter, L. S., Kirby, J. S., Gremore, T. M., & Keefe, F. J. (2014). Couples and breast cancer: Women’s mood and partners’ marital satisfaction predicting support perception . Journal of Family Psychology, 28(5) , 675.

Oldfield, J., Humphrey, N., & Hebron, J. (2017). Risk factors in the development of behavior difficulties among students with special educational needs and disabilities: A multilevel analysis . British journal of educational psychology, 87(2) , 146-169.

5) Keywords

APA style suggests including a list of keywords at the end of the abstract. This is particularly common in academic articles and helps other researchers find your work in databases.

Keywords in an abstract should be selected to help other researchers find your work when searching an online database. These keywords should effectively represent the main topics of your study. Here are some tips for choosing keywords:

Core Concepts: Identify the most important ideas or concepts in your paper. These often include your main research topic, the methods you’ve used, or the theories you’re discussing.

Specificity: Your keywords should be specific to your research. For example, suppose your paper is about the effects of climate change on bird migration patterns in a specific region. In that case, your keywords might include “climate change,” “bird migration,” and the region’s name.

Consistency with Paper: Make sure your keywords are consistent with the terms you’ve used in your paper. For example, if you use the term “adolescent” rather than “teen” in your paper, choose “adolescent” as your keyword, not “teen.”

Jargon and Acronyms: Avoid using too much-specialized jargon or acronyms in your keywords, as these might not be understood or used by all researchers in your field.

Synonyms: Consider including synonyms of your keywords to capture as many relevant searches as possible. For example, if your paper discusses “post-traumatic stress disorder,” you might include “PTSD” as a keyword.

Remember, keywords are a tool for others to find your work, so think about what terms other researchers might use when searching for papers on your topic.

The Abstract SHOULD NOT contain:

Lengthy background or contextual information: The abstract should focus on your research and findings, not general topic background.

Undefined jargon, abbreviations,  or acronyms: The abstract should be accessible to a wide audience, so avoid highly specialized terms without defining them.

Citations: Abstracts typically do not include citations, as they summarize original research.

Incomplete sentences or bulleted lists: The abstract should be a single, coherent paragraph written in complete sentences.

New information not covered in the paper: The abstract should only summarize the paper’s content.

Subjective comments or value judgments: Stick to objective descriptions of your research.

Excessive details on methods or procedures: Keep descriptions of methods brief and focused on main steps.

Speculative or inconclusive statements: The abstract should state the research’s clear findings, not hypotheses or possible interpretations.

  • Any illustration, figure, table, or references to them . All visual aids, data, or extensive details should be included in the main body of your paper, not in the abstract. 
  • Elliptical or incomplete sentences should be avoided in an abstract . The use of ellipses (…), which could indicate incomplete thoughts or omitted text, is not appropriate in an abstract.

APA Style for Abstracts

An APA abstract must be formatted as follows:

Include the running head aligned to the left at the top of the page (professional papers only) and page number. Note, student papers do not require a running head. On the first line, center the heading “Abstract” and bold (do not underlined or italicize). Do not indent the single abstract paragraph (which begins one line below the section title). Double-space the text. Use Times New Roman font in 12 pt. Set one-inch (or 2.54 cm) margins. If you include a “keywords” section at the end of the abstract, indent the first line and italicize the word “Keywords” while leaving the keywords themselves without any formatting.

Example APA Abstract Page

Download this example as a PDF

APA Style Abstract Example

Further Information

  • APA 7th Edition Abstract and Keywords Guide
  • Example APA Abstract
  • How to Write a Good Abstract for a Scientific Paper or Conference Presentation
  • How to Write a Lab Report
  • Writing an APA paper

How long should an APA abstract be?

An APA abstract should typically be between 150 to 250 words long. However, the exact length may vary depending on specific publication or assignment guidelines. It is crucial that it succinctly summarizes the essential elements of the work, including purpose, methods, findings, and conclusions.

Where does the abstract go in an APA paper?

In an APA formatted paper, the abstract is placed on its own page, directly after the title page and before the main body of the paper. It’s typically the second page of the document. It starts with the word “Abstract” (centered and not in bold) at the top of the page, followed by the text of the abstract itself.

What are the 4 C’s of abstract writing?

The 4 C’s of abstract writing are an approach to help you create a well-structured and informative abstract. They are:

Conciseness: An abstract should briefly summarize the key points of your study. Stick to the word limit (typically between 150-250 words for an APA abstract) and avoid unnecessary details.

Clarity: Your abstract should be easy to understand. Avoid jargon and complex sentences. Clearly explain the purpose, methods, results, and conclusions of your study.

Completeness: Even though it’s brief, the abstract should provide a complete overview of your study, including the purpose, methods, key findings, and your interpretation of the results.

Cohesion: The abstract should flow logically from one point to the next, maintaining a coherent narrative about your study. It’s not just a list of disjointed elements; it’s a brief story of your research from start to finish.

What is the abstract of a psychology paper?

An abstract in a psychology paper serves as a snapshot of the paper, allowing readers to quickly understand the purpose, methodology, results, and implications of the research without reading the entire paper. It is generally between 150-250 words long.

Print Friendly, PDF & Email

How to Write an Abstract for Your Thesis or Dissertation What is an Abstract? The abstract is an important component of your thesis. Presented at the beginning of the thesis, it is likely the first substantive description of your work read by an external examiner. You should view it as an opportunity to set accurate expectations. The abstract is a summary of the whole thesis. It presents all the major elements of your work in a highly condensed form. An abstract often functions, together with the thesis title, as a stand-alone text. Abstracts appear, absent the full text of the thesis, in bibliographic indexes such as PsycInfo. They may also be presented in announcements of the thesis examination. Most readers who encounter your abstract in a bibliographic database or receive an email announcing your research presentation will never retrieve the full text or attend the presentation. An abstract is not merely an introduction in the sense of a preface, preamble, or advance organizer that prepares the reader for the thesis. In addition to that function, it must be capable of substituting for the whole thesis when there is insufficient time and space for the full text. Size and Structure Currently, the maximum sizes for abstracts submitted to Canada's National Archive are 150 words (Masters thesis) and 350 words (Doctoral dissertation). To preserve visual coherence, you may wish to limit the abstract for your doctoral dissertation to one double-spaced page, about 280 words. The structure of the abstract should mirror the structure of the whole thesis, and should represent all its major elements. For example, if your thesis has five chapters (introduction, literature review, methodology, results, conclusion), there should be one or more sentences assigned to summarize each chapter. Clearly Specify Your Research Questions As in the thesis itself, your research questions are critical in ensuring that the abstract is coherent and logically structured. They form the skeleton to which other elements adhere. They should be presented near the beginning of the abstract. There is only room for one to three questions. If there are more than three major research questions in your thesis, you should consider restructuring them by reducing some to subsidiary status. Don't Forget the Results The most common error in abstracts is failure to present results. The primary function of your thesis (and by extension your abstract) is not to tell readers what you did, it is to tell them what you discovered. Other information, such as the account of your research methods, is needed mainly to back the claims you make about your results. Approximately the last half of the abstract should be dedicated to summarizing and interpreting your results. Updated 2008.09.11 © John C. Nesbit

IMAGES

  1. Dissertation Abstract

    how to write abstract dissertation

  2. How to Write a Dissertation Abstract- Step by Step Guidance

    how to write abstract dissertation

  3. How To Write An Abstract For Your Dissertation Undergraduate

    how to write abstract dissertation

  4. How to Write an Abstract by Philip Koopman, Carnegie Mellon University

    how to write abstract dissertation

  5. 🎉 How to write abstract of project. How to Write an Abstract Step. 2022

    how to write abstract dissertation

  6. How to Write an Abstract in APA: 14 Steps (with Pictures)

    how to write abstract dissertation

VIDEO

  1. research -Abstract

  2. HOW TO WRITE ABSTRACT IN A RESEARCH PAPER

  3. how to write Abstract art in Urdu Calligraphy by Qasim Mahmood

  4. How To Write An Abstract

  5. FEAR of RESEARCH

  6. Abstract

COMMENTS

  1. How to Write an Abstract

    Step 1: Introduction Step 2: Methods Step 3: Results Step 4: Discussion Keywords Tips for writing an abstract Other interesting articles Frequently asked questions about abstracts Abstract example Hover over the different parts of the abstract to see how it is constructed. Example: Humanities thesis abstract

  2. How To Write A Dissertation Abstract (With Examples)

    Simply put, the abstract in a dissertation or thesis is a short (but well structured) summary that outlines the most important points of your research (i.e. the key takeaways). The abstract is usually 1 paragraph or about 300-500 words long (about one page), but but this can vary between universities.

  3. How to Write an Abstract

    Step 1: Introduction Step 2: Methods Step 3: Results Step 4: Discussion Keywords Tips for writing an abstract Frequently asked questions about abstracts Abstract example Hover over the different parts of the abstract to see how it is constructed. Example: Humanities thesis abstract

  4. Writing an Abstract for Your Research Paper

    An abstract is a short summary of your (published or unpublished) research paper, usually about a paragraph (c. 6-7 sentences, 150-250 words) long. A well-written abstract serves multiple purposes: an abstract lets readers get the gist or essence of your paper or article quickly, in order to decide whether to read the full paper;

  5. How to Write an Abstract for a Dissertation or Thesis

    If you're a PhD student, having written your 100,000-word thesis, the abstract will be the 300 word summary included at the start of the thesis that succinctly explains the motivation for your study (i.e. why this research was needed), the main work you did (i.e. the focus of each chapter), what you found (the results) and concluding with how yo...

  6. Abstracts

    What this handout is about This handout provides definitions and examples of the two main types of abstracts: descriptive and informative. It also provides guidelines for constructing an abstract and general tips for you to keep in mind when drafting. Finally, it includes a few examples of abstracts broken down into their component parts.

  7. The Writing Center

    The abstract should begin with a brief but precise statement of the problem or issue, followed by a description of the research method and design, the major findings, and the conclusions reached.

  8. PDF How To Write An Abstract

    An introduction provides the reader with some background information to your topic and introduces the rationale for the project, explaining and defining the problem. It then details the content of the Dissertation and the intended structure. It is different from the abstract in that it does not give any information about the methods, results ...

  9. 3. The Abstract

    An abstract summarizes, usually in one paragraph of 300 words or less, the major aspects of the entire paper in a prescribed sequence that includes: 1) the overall purpose of the study and the research problem(s) you investigated; 2) the basic design of the study; 3) major findings or trends found as a result of your analysis; and, 4) a brief summary of your interpretations and conclusions.

  10. How to Write an Abstract for a Dissertation

    The abstract of a dissertation needs to be conspicuous, meaningful, interesting and of course, informative. It should contain brief but relevant information from all chapters of your dissertation to provide a brief overview of the research that has been conducted.

  11. Abstracts

    The typical abstract includes these elements: A statement of the problem and objectives. A statement of the significance of the work. A summary of employed methods or your research approach. A summary of findings or conclusions of the study. A description of the implications of the findings. Regardless of field, abstract authors should explain ...

  12. How To Write The Abstract For Your Dissertation Or Thesis ...

    Learn the basics of how to write an A-grade abstract (or executive summary) for your dissertation, thesis or research project. We explain what a thesis abstr...

  13. Writing an abstract

    Methods - The methods section should contain enough information to enable the reader to understand what was done, and how. It should include brief details of the research design, sample size, duration of study, and so on. Results - The results section is the most important part of the abstract. This is because readers who skim an abstract do so ...

  14. How to Write an Abstract for a Dissertation

    Written by Emma Taylor At roughly 200 words, the abstract is the shortest part of the dissertation! Thankfully, it's also one of the simplest to write - as long as you approach it sensibly… The cardinal rule for writing an abstract is to leave it 'til last.

  15. What Is a Dissertation?

    How to write and structure a dissertation Title page Acknowledgements or preface Abstract Table of contents List of figures and tables List of abbreviations Glossary Introduction Literature review Methodology Results Discussion Conclusion Reference list Appendices Proofreading and editing

  16. How to Write a Dissertation

    The abstract is a short summary of your dissertation, usually about 150-300 words long. You should write it at the very end, when you've completed the rest of the dissertation. In the abstract, make sure to: State the main topic and aims of your research; Describe the methods you used; Summarise the main results; State your conclusions

  17. Dissertation Structure & Layout 101 (+ Examples)

    Abstract (or executive summary) Table of contents, list of figures and tables The core chapters (the "meat" of the dissertation) Chapter 1: Introduction Chapter 2: Literature review Chapter 3: Methodology Chapter 4: Results Chapter 5: Discussion Chapter 6: Conclusion Reference list Appendix

  18. The Abstract

    What is an abstract? An abstract is a concise summary of an academic text such as a journal article, dissertation or thesis.It provides a 'snapshot' view of the overall text, from the research question through to the conclusion. In thinking about how to write an abstract, it's helpful to consider why we read abstracts. We usually encounter abstracts while searching databases for articles to ...

  19. How To Write an Abstract in 7 Steps (With an Example)

    1. Write your paper. Since the abstract is a summary of a research paper, the first step is to write your paper. Even if you know what you will be including in your paper, it's always best to save your abstract for the end so you can accurately summarize the findings you describe in the paper. 2.

  20. How to Write a Dissertation Abstract: 13 Steps (with Pictures)

    Include a summary of your conclusions, as well. If you're writing an abstract for a scientific dissertation, it's not necessary to include all of your literature review; however, you might include a sentence on how your paper fits into the larger academic discussion. 2. Gather the information you will need for a science abstract.

  21. PDF A Complete Dissertation

    Provide a cursory glance at the constitution of an entire dissertation. Offer a comprehensive outline of all key elements for each section of the dissertation—that is, precursor of what is to come, with each element being more fully developed and explained further along in the book.

  22. PDF Abstract and Keywords Guide, APA Style 7th Edition

    Keywords Format. More information on how to write and format an abstract and keywords can be found in the Publication Manual of the American Psychological Association (7th ed.) Sections 2.9 to 2.10 and in the Concise Guide to APA Style (7th ed.) Section 1.10. SOURCE: American Psychological Association. (2020).

  23. How to Write an Abstract in APA Format with Examples

    An APA abstract is a brief, comprehensive summary of the contents of an article, research paper, dissertation, or report. It is written in accordance with the guidelines of the American Psychological Association (APA), which is a widely used format in social and behavioral sciences. ... The 4 C's of abstract writing are an approach to help ...

  24. How to Write an Abstract for Your Thesis or Dissertation

    To preserve visual coherence, you may wish to limit the abstract for your doctoral dissertation to one double-spaced page, about 280 words. The structure of the abstract should mirror the structure of the whole thesis, and should represent all its major elements. For example, if your thesis has five chapters (introduction, literature review ...