thesis chapter abstract

  • How to Write an Abstract for a Dissertation or Thesis
  • Doing a PhD

What is a Thesis or Dissertation Abstract?

The Cambridge English Dictionary defines an abstract in academic writing as being “ a few sentences that give the main ideas in an article or a scientific paper ” and the Collins English Dictionary says “ an abstract of an article, document, or speech is a short piece of writing that gives the main points of it ”.

Whether you’re writing up your Master’s dissertation or PhD thesis, the abstract will be a key element of this document that you’ll want to make sure you give proper attention to.

What is the Purpose of an Abstract?

The aim of a thesis abstract is to give the reader a broad overview of what your research project was about and what you found that was novel, before he or she decides to read the entire thesis. The reality here though is that very few people will read the entire thesis, and not because they’re necessarily disinterested but because practically it’s too large a document for most people to have the time to read. The exception to this is your PhD examiner, however know that even they may not read the entire length of the document.

Some people may still skip to and read specific sections throughout your thesis such as the methodology, but the fact is that the abstract will be all that most read and will therefore be the section they base their opinions about your research on. In short, make sure you write a good, well-structured abstract.

How Long Should an Abstract Be?

If you’re a PhD student, having written your 100,000-word thesis, the abstract will be the 300 word summary included at the start of the thesis that succinctly explains the motivation for your study (i.e. why this research was needed), the main work you did (i.e. the focus of each chapter), what you found (the results) and concluding with how your research study contributed to new knowledge within your field.

Woodrow Wilson, the 28th President of the United States of America, once famously said:

thesis chapter abstract

The point here is that it’s easier to talk open-endedly about a subject that you know a lot about than it is to condense the key points into a 10-minute speech; the same applies for an abstract. Three hundred words is not a lot of words which makes it even more difficult to condense three (or more) years of research into a coherent, interesting story.

What Makes a Good PhD Thesis Abstract?

Whilst the abstract is one of the first sections in your PhD thesis, practically it’s probably the last aspect that you’ll ending up writing before sending the document to print. The reason being that you can’t write a summary about what you did, what you found and what it means until you’ve done the work.

A good abstract is one that can clearly explain to the reader in 300 words:

  • What your research field actually is,
  • What the gap in knowledge was in your field,
  • The overarching aim and objectives of your PhD in response to these gaps,
  • What methods you employed to achieve these,
  • You key results and findings,
  • How your work has added to further knowledge in your field of study.

Another way to think of this structure is:

  • Introduction,
  • Aims and objectives,
  • Discussion,
  • Conclusion.

Following this ‘formulaic’ approach to writing the abstract should hopefully make it a little easier to write but you can already see here that there’s a lot of information to convey in a very limited number of words.

How Do You Write a Good PhD Thesis Abstract?

The biggest challenge you’ll have is getting all the 6 points mentioned above across in your abstract within the limit of 300 words . Your particular university may give some leeway in going a few words over this but it’s good practice to keep within this; the art of succinctly getting your information across is an important skill for a researcher to have and one that you’ll be called on to use regularly as you write papers for peer review.

Keep It Concise

Every word in the abstract is important so make sure you focus on only the key elements of your research and the main outcomes and significance of your project that you want the reader to know about. You may have come across incidental findings during your research which could be interesting to discuss but this should not happen in the abstract as you simply don’t have enough words. Furthermore, make sure everything you talk about in your thesis is actually described in the main thesis.

Make a Unique Point Each Sentence

Keep the sentences short and to the point. Each sentence should give the reader new, useful information about your research so there’s no need to write out your project title again. Give yourself one or two sentences to introduce your subject area and set the context for your project. Then another sentence or two to explain the gap in the knowledge; there’s no need or expectation for you to include references in the abstract.

Explain Your Research

Some people prefer to write their overarching aim whilst others set out their research questions as they correspond to the structure of their thesis chapters; the approach you use is up to you, as long as the reader can understand what your dissertation or thesis had set out to achieve. Knowing this will help the reader better understand if your results help to answer the research questions or if further work is needed.

Keep It Factual

Keep the content of the abstract factual; that is to say that you should avoid bringing too much or any opinion into it, which inevitably can make the writing seem vague in the points you’re trying to get across and even lacking in structure.

Write, Edit and Then Rewrite

Spend suitable time editing your text, and if necessary, completely re-writing it. Show the abstract to others and ask them to explain what they understand about your research – are they able to explain back to you each of the 6 structure points, including why your project was needed, the research questions and results, and the impact it had on your research field? It’s important that you’re able to convey what new knowledge you contributed to your field but be mindful when writing your abstract that you don’t inadvertently overstate the conclusions, impact and significance of your work.

Thesis and Dissertation Abstract Examples

Perhaps the best way to understand how to write a thesis abstract is to look at examples of what makes a good and bad abstract.

Example of A Bad Abstract

Let’s start with an example of a bad thesis abstract:

In this project on “The Analysis of the Structural Integrity of 3D Printed Polymers for use in Aircraft”, my research looked at how 3D printing of materials can help the aviation industry in the manufacture of planes. Plane parts can be made at a lower cost using 3D printing and made lighter than traditional components. This project investigated the structural integrity of EBM manufactured components, which could revolutionise the aviation industry.

What Makes This a Bad Abstract

Hopefully you’ll have spotted some of the reasons this would be considered a poor abstract, not least because the author used up valuable words by repeating the lengthy title of the project in the abstract.

Working through our checklist of the 6 key points you want to convey to the reader:

  • There has been an attempt to introduce the research area , albeit half-way through the abstract but it’s not clear if this is a materials science project about 3D printing or is it about aircraft design.
  • There’s no explanation about where the gap in the knowledge is that this project attempted to address.
  • We can see that this project was focussed on the topic of structural integrity of materials in aircraft but the actual research aims or objectives haven’t been defined.
  • There’s no mention at all of what the author actually did to investigate structural integrity. For example was this an experimental study involving real aircraft, or something in the lab, computer simulations etc.
  • The author also doesn’t tell us a single result of his research, let alone the key findings !
  • There’s a bold claim in the last sentence of the abstract that this project could revolutionise the aviation industry, and this may well be the case, but based on the abstract alone there is no evidence to support this as it’s not even clear what the author did .

This is an extreme example but is a good way to illustrate just how unhelpful a poorly written abstract can be. At only 71 words long, it definitely hasn’t maximised the amount of information that could be presented and the what they have presented has lacked clarity and structure.

A final point to note is the use of the EBM acronym, which stands for Electron Beam Melting in the context of 3D printing; this is a niche acronym for the author to assume that the reader would know the meaning of. It’s best to avoid acronyms in your abstract all together even if it’s something that you might expect most people to know about, unless you specifically define the meaning first.

Example of A Good Abstract

Having seen an example of a bad thesis abstract, now lets look at an example of a good PhD thesis abstract written about the same (fictional) project:

Additive manufacturing (AM) of titanium alloys has the potential to enable cheaper and lighter components to be produced with customised designs for use in aircraft engines. Whilst the proof-of-concept of these have been promising, the structural integrity of AM engine parts in response to full thrust and temperature variations is not clear.

The primary aim of this project was to determine the fracture modes and mechanisms of AM components designed for use in Boeing 747 engines. To achieve this an explicit finite element (FE) model was developed to simulate the environment and parameters that the engine is exposed to during flight. The FE model was validated using experimental data replicating the environmental parameters in a laboratory setting using ten AM engine components provided by the industry sponsor. The validated FE model was then used to investigate the extent of crack initiation and propagation as the environment parameters were adjusted.

This project was the first to investigate fracture patterns in AM titanium components used in aircraft engines; the key finding was that the presence of cavities within the structures due to errors in the printing process, significantly increased the risk of fracture. Secondly, the simulations showed that cracks formed within AM parts were more likely to worsen and lead to component failure at subzero temperatures when compared to conventionally manufactured parts. This has demonstrated an important safety concern which needs to be addressed before AM parts can be used in commercial aircraft.

What Makes This a Good Abstract

Having read this ‘good abstract’ you should have a much better understand about what the subject area is about, where the gap in the knowledge was, the aim of the project, the methods that were used, key results and finally the significance of these results. To break these points down further, from this good abstract we now know that:

  • The research area is around additive manufacturing (i.e. 3D printing) of materials for use in aircraft.
  • The gap in knowledge was how these materials will behave structural when used in aircraft engines.
  • The aim was specifically to investigate how the components can fracture.
  • The methods used to investigate this were a combination of computational and lab based experimental modelling.
  • The key findings were the increased risk of fracture of these components due to the way they are manufactured.
  • The significance of these findings were that it showed a potential risk of component failure that could comprise the safety of passengers and crew on the aircraft.

The abstract text has a much clearer flow through these different points in how it’s written and has made much better use of the available word count. Acronyms have even been used twice in this good abstract but they were clearly defined the first time they were introduced in the text so that there was no confusion about their meaning.

The abstract you write for your dissertation or thesis should succinctly explain to the reader why the work of your research was needed, what you did, what you found and what it means. Most people that come across your thesis, including any future employers, are likely to read only your abstract. Even just for this reason alone, it’s so important that you write the best abstract you can; this will not only convey your research effectively but also put you in the best light possible as a researcher.

Browse PhDs Now

Join thousands of students.

Join thousands of other students and stay up to date with the latest PhD programmes, funding opportunities and advice.

Writing an Abstract for Your Research Paper

Definition and Purpose of Abstracts

An abstract is a short summary of your (published or unpublished) research paper, usually about a paragraph (c. 6-7 sentences, 150-250 words) long. A well-written abstract serves multiple purposes:

  • an abstract lets readers get the gist or essence of your paper or article quickly, in order to decide whether to read the full paper;
  • an abstract prepares readers to follow the detailed information, analyses, and arguments in your full paper;
  • and, later, an abstract helps readers remember key points from your paper.

It’s also worth remembering that search engines and bibliographic databases use abstracts, as well as the title, to identify key terms for indexing your published paper. So what you include in your abstract and in your title are crucial for helping other researchers find your paper or article.

If you are writing an abstract for a course paper, your professor may give you specific guidelines for what to include and how to organize your abstract. Similarly, academic journals often have specific requirements for abstracts. So in addition to following the advice on this page, you should be sure to look for and follow any guidelines from the course or journal you’re writing for.

The Contents of an Abstract

Abstracts contain most of the following kinds of information in brief form. The body of your paper will, of course, develop and explain these ideas much more fully. As you will see in the samples below, the proportion of your abstract that you devote to each kind of information—and the sequence of that information—will vary, depending on the nature and genre of the paper that you are summarizing in your abstract. And in some cases, some of this information is implied, rather than stated explicitly. The Publication Manual of the American Psychological Association , which is widely used in the social sciences, gives specific guidelines for what to include in the abstract for different kinds of papers—for empirical studies, literature reviews or meta-analyses, theoretical papers, methodological papers, and case studies.

Here are the typical kinds of information found in most abstracts:

  • the context or background information for your research; the general topic under study; the specific topic of your research
  • the central questions or statement of the problem your research addresses
  • what’s already known about this question, what previous research has done or shown
  • the main reason(s) , the exigency, the rationale , the goals for your research—Why is it important to address these questions? Are you, for example, examining a new topic? Why is that topic worth examining? Are you filling a gap in previous research? Applying new methods to take a fresh look at existing ideas or data? Resolving a dispute within the literature in your field? . . .
  • your research and/or analytical methods
  • your main findings , results , or arguments
  • the significance or implications of your findings or arguments.

Your abstract should be intelligible on its own, without a reader’s having to read your entire paper. And in an abstract, you usually do not cite references—most of your abstract will describe what you have studied in your research and what you have found and what you argue in your paper. In the body of your paper, you will cite the specific literature that informs your research.

When to Write Your Abstract

Although you might be tempted to write your abstract first because it will appear as the very first part of your paper, it’s a good idea to wait to write your abstract until after you’ve drafted your full paper, so that you know what you’re summarizing.

What follows are some sample abstracts in published papers or articles, all written by faculty at UW-Madison who come from a variety of disciplines. We have annotated these samples to help you see the work that these authors are doing within their abstracts.

Choosing Verb Tenses within Your Abstract

The social science sample (Sample 1) below uses the present tense to describe general facts and interpretations that have been and are currently true, including the prevailing explanation for the social phenomenon under study. That abstract also uses the present tense to describe the methods, the findings, the arguments, and the implications of the findings from their new research study. The authors use the past tense to describe previous research.

The humanities sample (Sample 2) below uses the past tense to describe completed events in the past (the texts created in the pulp fiction industry in the 1970s and 80s) and uses the present tense to describe what is happening in those texts, to explain the significance or meaning of those texts, and to describe the arguments presented in the article.

The science samples (Samples 3 and 4) below use the past tense to describe what previous research studies have done and the research the authors have conducted, the methods they have followed, and what they have found. In their rationale or justification for their research (what remains to be done), they use the present tense. They also use the present tense to introduce their study (in Sample 3, “Here we report . . .”) and to explain the significance of their study (In Sample 3, This reprogramming . . . “provides a scalable cell source for. . .”).

Sample Abstract 1

From the social sciences.

Reporting new findings about the reasons for increasing economic homogamy among spouses

Gonalons-Pons, Pilar, and Christine R. Schwartz. “Trends in Economic Homogamy: Changes in Assortative Mating or the Division of Labor in Marriage?” Demography , vol. 54, no. 3, 2017, pp. 985-1005.

“The growing economic resemblance of spouses has contributed to rising inequality by increasing the number of couples in which there are two high- or two low-earning partners. [Annotation for the previous sentence: The first sentence introduces the topic under study (the “economic resemblance of spouses”). This sentence also implies the question underlying this research study: what are the various causes—and the interrelationships among them—for this trend?] The dominant explanation for this trend is increased assortative mating. Previous research has primarily relied on cross-sectional data and thus has been unable to disentangle changes in assortative mating from changes in the division of spouses’ paid labor—a potentially key mechanism given the dramatic rise in wives’ labor supply. [Annotation for the previous two sentences: These next two sentences explain what previous research has demonstrated. By pointing out the limitations in the methods that were used in previous studies, they also provide a rationale for new research.] We use data from the Panel Study of Income Dynamics (PSID) to decompose the increase in the correlation between spouses’ earnings and its contribution to inequality between 1970 and 2013 into parts due to (a) changes in assortative mating, and (b) changes in the division of paid labor. [Annotation for the previous sentence: The data, research and analytical methods used in this new study.] Contrary to what has often been assumed, the rise of economic homogamy and its contribution to inequality is largely attributable to changes in the division of paid labor rather than changes in sorting on earnings or earnings potential. Our findings indicate that the rise of economic homogamy cannot be explained by hypotheses centered on meeting and matching opportunities, and they show where in this process inequality is generated and where it is not.” (p. 985) [Annotation for the previous two sentences: The major findings from and implications and significance of this study.]

Sample Abstract 2

From the humanities.

Analyzing underground pulp fiction publications in Tanzania, this article makes an argument about the cultural significance of those publications

Emily Callaci. “Street Textuality: Socialism, Masculinity, and Urban Belonging in Tanzania’s Pulp Fiction Publishing Industry, 1975-1985.” Comparative Studies in Society and History , vol. 59, no. 1, 2017, pp. 183-210.

“From the mid-1970s through the mid-1980s, a network of young urban migrant men created an underground pulp fiction publishing industry in the city of Dar es Salaam. [Annotation for the previous sentence: The first sentence introduces the context for this research and announces the topic under study.] As texts that were produced in the underground economy of a city whose trajectory was increasingly charted outside of formalized planning and investment, these novellas reveal more than their narrative content alone. These texts were active components in the urban social worlds of the young men who produced them. They reveal a mode of urbanism otherwise obscured by narratives of decolonization, in which urban belonging was constituted less by national citizenship than by the construction of social networks, economic connections, and the crafting of reputations. This article argues that pulp fiction novellas of socialist era Dar es Salaam are artifacts of emergent forms of male sociability and mobility. In printing fictional stories about urban life on pilfered paper and ink, and distributing their texts through informal channels, these writers not only described urban communities, reputations, and networks, but also actually created them.” (p. 210) [Annotation for the previous sentences: The remaining sentences in this abstract interweave other essential information for an abstract for this article. The implied research questions: What do these texts mean? What is their historical and cultural significance, produced at this time, in this location, by these authors? The argument and the significance of this analysis in microcosm: these texts “reveal a mode or urbanism otherwise obscured . . .”; and “This article argues that pulp fiction novellas. . . .” This section also implies what previous historical research has obscured. And through the details in its argumentative claims, this section of the abstract implies the kinds of methods the author has used to interpret the novellas and the concepts under study (e.g., male sociability and mobility, urban communities, reputations, network. . . ).]

Sample Abstract/Summary 3

From the sciences.

Reporting a new method for reprogramming adult mouse fibroblasts into induced cardiac progenitor cells

Lalit, Pratik A., Max R. Salick, Daryl O. Nelson, Jayne M. Squirrell, Christina M. Shafer, Neel G. Patel, Imaan Saeed, Eric G. Schmuck, Yogananda S. Markandeya, Rachel Wong, Martin R. Lea, Kevin W. Eliceiri, Timothy A. Hacker, Wendy C. Crone, Michael Kyba, Daniel J. Garry, Ron Stewart, James A. Thomson, Karen M. Downs, Gary E. Lyons, and Timothy J. Kamp. “Lineage Reprogramming of Fibroblasts into Proliferative Induced Cardiac Progenitor Cells by Defined Factors.” Cell Stem Cell , vol. 18, 2016, pp. 354-367.

“Several studies have reported reprogramming of fibroblasts into induced cardiomyocytes; however, reprogramming into proliferative induced cardiac progenitor cells (iCPCs) remains to be accomplished. [Annotation for the previous sentence: The first sentence announces the topic under study, summarizes what’s already known or been accomplished in previous research, and signals the rationale and goals are for the new research and the problem that the new research solves: How can researchers reprogram fibroblasts into iCPCs?] Here we report that a combination of 11 or 5 cardiac factors along with canonical Wnt and JAK/STAT signaling reprogrammed adult mouse cardiac, lung, and tail tip fibroblasts into iCPCs. The iCPCs were cardiac mesoderm-restricted progenitors that could be expanded extensively while maintaining multipo-tency to differentiate into cardiomyocytes, smooth muscle cells, and endothelial cells in vitro. Moreover, iCPCs injected into the cardiac crescent of mouse embryos differentiated into cardiomyocytes. iCPCs transplanted into the post-myocardial infarction mouse heart improved survival and differentiated into cardiomyocytes, smooth muscle cells, and endothelial cells. [Annotation for the previous four sentences: The methods the researchers developed to achieve their goal and a description of the results.] Lineage reprogramming of adult somatic cells into iCPCs provides a scalable cell source for drug discovery, disease modeling, and cardiac regenerative therapy.” (p. 354) [Annotation for the previous sentence: The significance or implications—for drug discovery, disease modeling, and therapy—of this reprogramming of adult somatic cells into iCPCs.]

Sample Abstract 4, a Structured Abstract

Reporting results about the effectiveness of antibiotic therapy in managing acute bacterial sinusitis, from a rigorously controlled study

Note: This journal requires authors to organize their abstract into four specific sections, with strict word limits. Because the headings for this structured abstract are self-explanatory, we have chosen not to add annotations to this sample abstract.

Wald, Ellen R., David Nash, and Jens Eickhoff. “Effectiveness of Amoxicillin/Clavulanate Potassium in the Treatment of Acute Bacterial Sinusitis in Children.” Pediatrics , vol. 124, no. 1, 2009, pp. 9-15.

“OBJECTIVE: The role of antibiotic therapy in managing acute bacterial sinusitis (ABS) in children is controversial. The purpose of this study was to determine the effectiveness of high-dose amoxicillin/potassium clavulanate in the treatment of children diagnosed with ABS.

METHODS : This was a randomized, double-blind, placebo-controlled study. Children 1 to 10 years of age with a clinical presentation compatible with ABS were eligible for participation. Patients were stratified according to age (<6 or ≥6 years) and clinical severity and randomly assigned to receive either amoxicillin (90 mg/kg) with potassium clavulanate (6.4 mg/kg) or placebo. A symptom survey was performed on days 0, 1, 2, 3, 5, 7, 10, 20, and 30. Patients were examined on day 14. Children’s conditions were rated as cured, improved, or failed according to scoring rules.

RESULTS: Two thousand one hundred thirty-five children with respiratory complaints were screened for enrollment; 139 (6.5%) had ABS. Fifty-eight patients were enrolled, and 56 were randomly assigned. The mean age was 6630 months. Fifty (89%) patients presented with persistent symptoms, and 6 (11%) presented with nonpersistent symptoms. In 24 (43%) children, the illness was classified as mild, whereas in the remaining 32 (57%) children it was severe. Of the 28 children who received the antibiotic, 14 (50%) were cured, 4 (14%) were improved, 4(14%) experienced treatment failure, and 6 (21%) withdrew. Of the 28children who received placebo, 4 (14%) were cured, 5 (18%) improved, and 19 (68%) experienced treatment failure. Children receiving the antibiotic were more likely to be cured (50% vs 14%) and less likely to have treatment failure (14% vs 68%) than children receiving the placebo.

CONCLUSIONS : ABS is a common complication of viral upper respiratory infections. Amoxicillin/potassium clavulanate results in significantly more cures and fewer failures than placebo, according to parental report of time to resolution.” (9)

Some Excellent Advice about Writing Abstracts for Basic Science Research Papers, by Professor Adriano Aguzzi from the Institute of Neuropathology at the University of Zurich:

thesis chapter abstract

Academic and Professional Writing

This is an accordion element with a series of buttons that open and close related content panels.

Analysis Papers

Reading Poetry

A Short Guide to Close Reading for Literary Analysis

Using Literary Quotations

Play Reviews

Writing a Rhetorical Précis to Analyze Nonfiction Texts

Incorporating Interview Data

Grant Proposals

Planning and Writing a Grant Proposal: The Basics

Additional Resources for Grants and Proposal Writing

Job Materials and Application Essays

Writing Personal Statements for Ph.D. Programs

  • Before you begin: useful tips for writing your essay
  • Guided brainstorming exercises
  • Get more help with your essay
  • Frequently Asked Questions

Resume Writing Tips

CV Writing Tips

Cover Letters

Business Letters

Proposals and Dissertations

Resources for Proposal Writers

Resources for Dissertators

Research Papers

Planning and Writing Research Papers

Quoting and Paraphrasing

Writing Annotated Bibliographies

Creating Poster Presentations

Thank-You Notes

Advice for Students Writing Thank-You Notes to Donors

Reading for a Review

Critical Reviews

Writing a Review of Literature

Scientific Reports

Scientific Report Format

Sample Lab Assignment

Writing for the Web

Writing an Effective Blog Post

Writing for Social Media: A Guide for Academics

The Writing Center • University of North Carolina at Chapel Hill

What this handout is about

This handout provides definitions and examples of the two main types of abstracts: descriptive and informative. It also provides guidelines for constructing an abstract and general tips for you to keep in mind when drafting. Finally, it includes a few examples of abstracts broken down into their component parts.

What is an abstract?

An abstract is a self-contained, short, and powerful statement that describes a larger work. Components vary according to discipline. An abstract of a social science or scientific work may contain the scope, purpose, results, and contents of the work. An abstract of a humanities work may contain the thesis, background, and conclusion of the larger work. An abstract is not a review, nor does it evaluate the work being abstracted. While it contains key words found in the larger work, the abstract is an original document rather than an excerpted passage.

Why write an abstract?

You may write an abstract for various reasons. The two most important are selection and indexing. Abstracts allow readers who may be interested in a longer work to quickly decide whether it is worth their time to read it. Also, many online databases use abstracts to index larger works. Therefore, abstracts should contain keywords and phrases that allow for easy searching.

Say you are beginning a research project on how Brazilian newspapers helped Brazil’s ultra-liberal president Luiz Ignácio da Silva wrest power from the traditional, conservative power base. A good first place to start your research is to search Dissertation Abstracts International for all dissertations that deal with the interaction between newspapers and politics. “Newspapers and politics” returned 569 hits. A more selective search of “newspapers and Brazil” returned 22 hits. That is still a fair number of dissertations. Titles can sometimes help winnow the field, but many titles are not very descriptive. For example, one dissertation is titled “Rhetoric and Riot in Rio de Janeiro.” It is unclear from the title what this dissertation has to do with newspapers in Brazil. One option would be to download or order the entire dissertation on the chance that it might speak specifically to the topic. A better option is to read the abstract. In this case, the abstract reveals the main focus of the dissertation:

This dissertation examines the role of newspaper editors in the political turmoil and strife that characterized late First Empire Rio de Janeiro (1827-1831). Newspaper editors and their journals helped change the political culture of late First Empire Rio de Janeiro by involving the people in the discussion of state. This change in political culture is apparent in Emperor Pedro I’s gradual loss of control over the mechanisms of power. As the newspapers became more numerous and powerful, the Emperor lost his legitimacy in the eyes of the people. To explore the role of the newspapers in the political events of the late First Empire, this dissertation analyzes all available newspapers published in Rio de Janeiro from 1827 to 1831. Newspapers and their editors were leading forces in the effort to remove power from the hands of the ruling elite and place it under the control of the people. In the process, newspapers helped change how politics operated in the constitutional monarchy of Brazil.

From this abstract you now know that although the dissertation has nothing to do with modern Brazilian politics, it does cover the role of newspapers in changing traditional mechanisms of power. After reading the abstract, you can make an informed judgment about whether the dissertation would be worthwhile to read.

Besides selection, the other main purpose of the abstract is for indexing. Most article databases in the online catalog of the library enable you to search abstracts. This allows for quick retrieval by users and limits the extraneous items recalled by a “full-text” search. However, for an abstract to be useful in an online retrieval system, it must incorporate the key terms that a potential researcher would use to search. For example, if you search Dissertation Abstracts International using the keywords “France” “revolution” and “politics,” the search engine would search through all the abstracts in the database that included those three words. Without an abstract, the search engine would be forced to search titles, which, as we have seen, may not be fruitful, or else search the full text. It’s likely that a lot more than 60 dissertations have been written with those three words somewhere in the body of the entire work. By incorporating keywords into the abstract, the author emphasizes the central topics of the work and gives prospective readers enough information to make an informed judgment about the applicability of the work.

When do people write abstracts?

  • when submitting articles to journals, especially online journals
  • when applying for research grants
  • when writing a book proposal
  • when completing the Ph.D. dissertation or M.A. thesis
  • when writing a proposal for a conference paper
  • when writing a proposal for a book chapter

Most often, the author of the entire work (or prospective work) writes the abstract. However, there are professional abstracting services that hire writers to draft abstracts of other people’s work. In a work with multiple authors, the first author usually writes the abstract. Undergraduates are sometimes asked to draft abstracts of books/articles for classmates who have not read the larger work.

Types of abstracts

There are two types of abstracts: descriptive and informative. They have different aims, so as a consequence they have different components and styles. There is also a third type called critical, but it is rarely used. If you want to find out more about writing a critique or a review of a work, see the UNC Writing Center handout on writing a literature review . If you are unsure which type of abstract you should write, ask your instructor (if the abstract is for a class) or read other abstracts in your field or in the journal where you are submitting your article.

Descriptive abstracts

A descriptive abstract indicates the type of information found in the work. It makes no judgments about the work, nor does it provide results or conclusions of the research. It does incorporate key words found in the text and may include the purpose, methods, and scope of the research. Essentially, the descriptive abstract describes the work being abstracted. Some people consider it an outline of the work, rather than a summary. Descriptive abstracts are usually very short—100 words or less.

Informative abstracts

The majority of abstracts are informative. While they still do not critique or evaluate a work, they do more than describe it. A good informative abstract acts as a surrogate for the work itself. That is, the writer presents and explains all the main arguments and the important results and evidence in the complete article/paper/book. An informative abstract includes the information that can be found in a descriptive abstract (purpose, methods, scope) but also includes the results and conclusions of the research and the recommendations of the author. The length varies according to discipline, but an informative abstract is rarely more than 10% of the length of the entire work. In the case of a longer work, it may be much less.

Here are examples of a descriptive and an informative abstract of this handout on abstracts . Descriptive abstract:

The two most common abstract types—descriptive and informative—are described and examples of each are provided.

Informative abstract:

Abstracts present the essential elements of a longer work in a short and powerful statement. The purpose of an abstract is to provide prospective readers the opportunity to judge the relevance of the longer work to their projects. Abstracts also include the key terms found in the longer work and the purpose and methods of the research. Authors abstract various longer works, including book proposals, dissertations, and online journal articles. There are two main types of abstracts: descriptive and informative. A descriptive abstract briefly describes the longer work, while an informative abstract presents all the main arguments and important results. This handout provides examples of various types of abstracts and instructions on how to construct one.

Which type should I use?

Your best bet in this case is to ask your instructor or refer to the instructions provided by the publisher. You can also make a guess based on the length allowed; i.e., 100-120 words = descriptive; 250+ words = informative.

How do I write an abstract?

The format of your abstract will depend on the work being abstracted. An abstract of a scientific research paper will contain elements not found in an abstract of a literature article, and vice versa. However, all abstracts share several mandatory components, and there are also some optional parts that you can decide to include or not. When preparing to draft your abstract, keep the following key process elements in mind:

  • Reason for writing: What is the importance of the research? Why would a reader be interested in the larger work?
  • Problem: What problem does this work attempt to solve? What is the scope of the project? What is the main argument/thesis/claim?
  • Methodology: An abstract of a scientific work may include specific models or approaches used in the larger study. Other abstracts may describe the types of evidence used in the research.
  • Results: Again, an abstract of a scientific work may include specific data that indicates the results of the project. Other abstracts may discuss the findings in a more general way.
  • Implications: What changes should be implemented as a result of the findings of the work? How does this work add to the body of knowledge on the topic?

(This list of elements is adapted with permission from Philip Koopman, “How to Write an Abstract.” )

All abstracts include:

  • A full citation of the source, preceding the abstract.
  • The most important information first.
  • The same type and style of language found in the original, including technical language.
  • Key words and phrases that quickly identify the content and focus of the work.
  • Clear, concise, and powerful language.

Abstracts may include:

  • The thesis of the work, usually in the first sentence.
  • Background information that places the work in the larger body of literature.
  • The same chronological structure as the original work.

How not to write an abstract:

  • Do not refer extensively to other works.
  • Do not add information not contained in the original work.
  • Do not define terms.

If you are abstracting your own writing

When abstracting your own work, it may be difficult to condense a piece of writing that you have agonized over for weeks (or months, or even years) into a 250-word statement. There are some tricks that you could use to make it easier, however.

Reverse outlining:

This technique is commonly used when you are having trouble organizing your own writing. The process involves writing down the main idea of each paragraph on a separate piece of paper– see our short video . For the purposes of writing an abstract, try grouping the main ideas of each section of the paper into a single sentence. Practice grouping ideas using webbing or color coding .

For a scientific paper, you may have sections titled Purpose, Methods, Results, and Discussion. Each one of these sections will be longer than one paragraph, but each is grouped around a central idea. Use reverse outlining to discover the central idea in each section and then distill these ideas into one statement.

Cut and paste:

To create a first draft of an abstract of your own work, you can read through the entire paper and cut and paste sentences that capture key passages. This technique is useful for social science research with findings that cannot be encapsulated by neat numbers or concrete results. A well-written humanities draft will have a clear and direct thesis statement and informative topic sentences for paragraphs or sections. Isolate these sentences in a separate document and work on revising them into a unified paragraph.

If you are abstracting someone else’s writing

When abstracting something you have not written, you cannot summarize key ideas just by cutting and pasting. Instead, you must determine what a prospective reader would want to know about the work. There are a few techniques that will help you in this process:

Identify key terms:

Search through the entire document for key terms that identify the purpose, scope, and methods of the work. Pay close attention to the Introduction (or Purpose) and the Conclusion (or Discussion). These sections should contain all the main ideas and key terms in the paper. When writing the abstract, be sure to incorporate the key terms.

Highlight key phrases and sentences:

Instead of cutting and pasting the actual words, try highlighting sentences or phrases that appear to be central to the work. Then, in a separate document, rewrite the sentences and phrases in your own words.

Don’t look back:

After reading the entire work, put it aside and write a paragraph about the work without referring to it. In the first draft, you may not remember all the key terms or the results, but you will remember what the main point of the work was. Remember not to include any information you did not get from the work being abstracted.

Revise, revise, revise

No matter what type of abstract you are writing, or whether you are abstracting your own work or someone else’s, the most important step in writing an abstract is to revise early and often. When revising, delete all extraneous words and incorporate meaningful and powerful words. The idea is to be as clear and complete as possible in the shortest possible amount of space. The Word Count feature of Microsoft Word can help you keep track of how long your abstract is and help you hit your target length.

Example 1: Humanities abstract

Kenneth Tait Andrews, “‘Freedom is a constant struggle’: The dynamics and consequences of the Mississippi Civil Rights Movement, 1960-1984” Ph.D. State University of New York at Stony Brook, 1997 DAI-A 59/02, p. 620, Aug 1998

This dissertation examines the impacts of social movements through a multi-layered study of the Mississippi Civil Rights Movement from its peak in the early 1960s through the early 1980s. By examining this historically important case, I clarify the process by which movements transform social structures and the constraints movements face when they try to do so. The time period studied includes the expansion of voting rights and gains in black political power, the desegregation of public schools and the emergence of white-flight academies, and the rise and fall of federal anti-poverty programs. I use two major research strategies: (1) a quantitative analysis of county-level data and (2) three case studies. Data have been collected from archives, interviews, newspapers, and published reports. This dissertation challenges the argument that movements are inconsequential. Some view federal agencies, courts, political parties, or economic elites as the agents driving institutional change, but typically these groups acted in response to the leverage brought to bear by the civil rights movement. The Mississippi movement attempted to forge independent structures for sustaining challenges to local inequities and injustices. By propelling change in an array of local institutions, movement infrastructures had an enduring legacy in Mississippi.

Now let’s break down this abstract into its component parts to see how the author has distilled his entire dissertation into a ~200 word abstract.

What the dissertation does This dissertation examines the impacts of social movements through a multi-layered study of the Mississippi Civil Rights Movement from its peak in the early 1960s through the early 1980s. By examining this historically important case, I clarify the process by which movements transform social structures and the constraints movements face when they try to do so.

How the dissertation does it The time period studied in this dissertation includes the expansion of voting rights and gains in black political power, the desegregation of public schools and the emergence of white-flight academies, and the rise and fall of federal anti-poverty programs. I use two major research strategies: (1) a quantitative analysis of county-level data and (2) three case studies.

What materials are used Data have been collected from archives, interviews, newspapers, and published reports.

Conclusion This dissertation challenges the argument that movements are inconsequential. Some view federal agencies, courts, political parties, or economic elites as the agents driving institutional change, but typically these groups acted in response to movement demands and the leverage brought to bear by the civil rights movement. The Mississippi movement attempted to forge independent structures for sustaining challenges to local inequities and injustices. By propelling change in an array of local institutions, movement infrastructures had an enduring legacy in Mississippi.

Keywords social movements Civil Rights Movement Mississippi voting rights desegregation

Example 2: Science Abstract

Luis Lehner, “Gravitational radiation from black hole spacetimes” Ph.D. University of Pittsburgh, 1998 DAI-B 59/06, p. 2797, Dec 1998

The problem of detecting gravitational radiation is receiving considerable attention with the construction of new detectors in the United States, Europe, and Japan. The theoretical modeling of the wave forms that would be produced in particular systems will expedite the search for and analysis of detected signals. The characteristic formulation of GR is implemented to obtain an algorithm capable of evolving black holes in 3D asymptotically flat spacetimes. Using compactification techniques, future null infinity is included in the evolved region, which enables the unambiguous calculation of the radiation produced by some compact source. A module to calculate the waveforms is constructed and included in the evolution algorithm. This code is shown to be second-order convergent and to handle highly non-linear spacetimes. In particular, we have shown that the code can handle spacetimes whose radiation is equivalent to a galaxy converting its whole mass into gravitational radiation in one second. We further use the characteristic formulation to treat the region close to the singularity in black hole spacetimes. The code carefully excises a region surrounding the singularity and accurately evolves generic black hole spacetimes with apparently unlimited stability.

This science abstract covers much of the same ground as the humanities one, but it asks slightly different questions.

Why do this study The problem of detecting gravitational radiation is receiving considerable attention with the construction of new detectors in the United States, Europe, and Japan. The theoretical modeling of the wave forms that would be produced in particular systems will expedite the search and analysis of the detected signals.

What the study does The characteristic formulation of GR is implemented to obtain an algorithm capable of evolving black holes in 3D asymptotically flat spacetimes. Using compactification techniques, future null infinity is included in the evolved region, which enables the unambiguous calculation of the radiation produced by some compact source. A module to calculate the waveforms is constructed and included in the evolution algorithm.

Results This code is shown to be second-order convergent and to handle highly non-linear spacetimes. In particular, we have shown that the code can handle spacetimes whose radiation is equivalent to a galaxy converting its whole mass into gravitational radiation in one second. We further use the characteristic formulation to treat the region close to the singularity in black hole spacetimes. The code carefully excises a region surrounding the singularity and accurately evolves generic black hole spacetimes with apparently unlimited stability.

Keywords gravitational radiation (GR) spacetimes black holes

Works consulted

We consulted these works while writing this handout. This is not a comprehensive list of resources on the handout’s topic, and we encourage you to do your own research to find additional publications. Please do not use this list as a model for the format of your own reference list, as it may not match the citation style you are using. For guidance on formatting citations, please see the UNC Libraries citation tutorial . We revise these tips periodically and welcome feedback.

Belcher, Wendy Laura. 2009. Writing Your Journal Article in Twelve Weeks: A Guide to Academic Publishing Success. Thousand Oaks, CA: Sage Press.

Koopman, Philip. 1997. “How to Write an Abstract.” Carnegie Mellon University. October 1997. http://users.ece.cmu.edu/~koopman/essays/abstract.html .

Lancaster, F.W. 2003. Indexing And Abstracting in Theory and Practice , 3rd ed. London: Facet Publishing.

You may reproduce it for non-commercial use if you use the entire handout and attribute the source: The Writing Center, University of North Carolina at Chapel Hill

Make a Gift

Welcome to Student Learning Te Taiako

Writing an abstract.

Abstracts are usually required for a thesis or publication. Abstracts give the reader an overall idea of your research and the ideas you will be exploring.

Since your abstract will be the first thing your readers see, take time with it!

It can be intimidating to condense a large thesis into a concise abstract but knowing the structure of an abstract can help you to approach this part of your thesis confidently.

The structure of an abstract

The overall structure of an abstract usually includes the following sections:

a diagram outlining the structure of an abstract

The order and flow of these sections may change depending on your discipline, but the structure will usually always include these main areas.

  • Your abstract should be able to stand alone without someone needing to read your paper to understand it
  • Try to have only 1-3 sentences for each section
  • Use relevant key words in your abstract that might lead search engines to your paper
  • Abstracts usually don’t need to have references cited within the text (though there are some exceptions)
  • Make your writing clear and succinct

Try Writing your own Abstract

Use the interactive tool below to begin drafting your abstract. At the end of the activity, you will be able to download a draft of your abstract. You can then edit to make sure the sentences link together and flow.

Additional resources

For more abstract writing resources check out:

  • pdf 1.2MB Writing an abstract

Grad Coach

How To Write A Dissertation Introduction Chapter:

The 7 essential ingredients of an a-grade introduction.

By: Derek Jansen (MBA). Reviewed By Dr Eunice Rautenbach (D. Tech) | March 2020

If you’re reading this, you’re probably at the daunting early phases of writing up the introduction chapter of your dissertation or thesis. It can be intimidating, I know. 

In this post, we’ll look at the 7 essential ingredients of a strong dissertation or thesis introduction chapter, as well as the essential things you need to keep in mind as you craft each section. We’ll also share some useful tips to help you optimize your approach.

Overview: How To Write An Introduction Chapter

  • Understand the purpose and function of the intro chapter
  • Craft an enticing and engaging opening section
  • Provide a background and context to the study
  • Clearly define the research problem
  • State your research aims, objectives and questions
  • Explain the significance of your study
  • Identify the limitations of your research
  • Outline the structure of your dissertation or thesis

The perfect dissertation or thesis introduction chapter

A quick sidenote:

You’ll notice that I’ve used the words dissertation and thesis interchangeably. While these terms reflect different levels of research – for example, Masters vs PhD-level research – the introduction chapter generally contains the same 7 essential ingredients regardless of level. So, in this post, dissertation introduction equals thesis introduction.

Start with why.

To craft a high-quality dissertation or thesis introduction chapter, you need to understand exactly what this chapter needs to achieve. In other words, what’s its purpose ? As the name suggests, the introduction chapter needs to introduce the reader to your research so that they understand what you’re trying to figure out, or what problem you’re trying to solve. More specifically, you need to answer four important questions in your introduction chapter.

These questions are:

  • What will you be researching? (in other words, your research topic)
  • Why is that worthwhile? (in other words, your justification)
  • What will the scope of your research be? (in other words, what will you cover and what won’t you cover)
  • What will the limitations of your research be? (in other words, what will the potential shortcomings of your research be?)

Simply put, your dissertation’s introduction chapter needs to provide an overview of your planned research , as well as a clear rationale for it. In other words, this chapter has to explain the “what” and the “why” of your research – what’s it all about and why’s that important.

Simple enough, right?

Well, the trick is finding the appropriate depth of information. As the researcher, you’ll be extremely close to your topic and this makes it easy to get caught up in the minor details. While these intricate details might be interesting, you need to write your introduction chapter on more of a “need-to-know” type basis, or it will end up way too lengthy and dense. You need to balance painting a clear picture with keeping things concise. Don’t worry though – you’ll be able to explore all the intricate details in later chapters.

The core ingredients of a dissertation introduction chapter

Now that you understand what you need to achieve from your introduction chapter, we can get into the details. While the exact requirements for this chapter can vary from university to university, there are seven core components that most universities will require. We call these the seven essential ingredients . 

The 7 Essential Ingredients

  • The opening section – where you’ll introduce the reader to your research in high-level terms
  • The background to the study – where you’ll explain the context of your project
  • The research problem – where you’ll explain the “gap” that exists in the current research
  • The research aims , objectives and questions – where you’ll clearly state what your research will aim to achieve
  • The significance (or justification) – where you’ll explain why your research is worth doing and the value it will provide to the world
  • The limitations – where you’ll acknowledge the potential limitations of your project and approach
  • The structure – where you’ll briefly outline the structure of your dissertation or thesis to help orient the reader

By incorporating these seven essential ingredients into your introduction chapter, you’ll comprehensively cover both the “ what ” and the “ why ” I mentioned earlier – in other words, you’ll achieve the purpose of the chapter.

Side note – you can also use these 7 ingredients in this order as the structure for your chapter to ensure a smooth, logical flow. This isn’t essential, but, generally speaking, it helps create an engaging narrative that’s easy for your reader to understand. If you’d like, you can also download our free introduction chapter template here.

Alright – let’s look at each of the ingredients now.

thesis chapter abstract

#1 – The Opening Section

The very first essential ingredient for your dissertation introduction is, well, an introduction or opening section. Just like every other chapter, your introduction chapter needs to start by providing a brief overview of what you’ll be covering in the chapter.

This section needs to engage the reader with clear, concise language that can be easily understood and digested. If the reader (your marker!) has to struggle through it, they’ll lose interest, which will make it harder for you to earn marks. Just because you’re writing an academic paper doesn’t mean you can ignore the basic principles of engaging writing used by marketers, bloggers, and journalists. At the end of the day, you’re all trying to sell an idea – yours is just a research idea.

So, what goes into this opening section?

Well, while there’s no set formula, it’s a good idea to include the following four foundational sentences in your opening section:

1 – A sentence or two introducing the overall field of your research.

For example:

“Organisational skills development involves identifying current or potential skills gaps within a business and developing programs to resolve these gaps. Management research, including X, Y and Z, has clearly established that organisational skills development is an essential contributor to business growth.”

2 – A sentence introducing your specific research problem.

“However, there are conflicting views and an overall lack of research regarding how best to manage skills development initiatives in highly dynamic environments where subject knowledge is rapidly and continuously evolving – for example, in the website development industry.”

3 – A sentence stating your research aims and objectives.

“This research aims to identify and evaluate skills development approaches and strategies for highly dynamic industries in which subject knowledge is continuously evolving.”.

4 – A sentence outlining the layout of the chapter.

“This chapter will provide an introduction to the study by first discussing the background and context, followed by the research problem, the research aims, objectives and questions, the significance and finally, the limitations.”

As I mentioned, this opening section of your introduction chapter shouldn’t be lengthy . Typically, these four sentences should fit neatly into one or two paragraphs, max. What you’re aiming for here is a clear, concise introduction to your research – not a detailed account.

PS – If some of this terminology sounds unfamiliar, don’t stress – I’ll explain each of the concepts later in this post.

Dissertation writing

#2 – Background to the study

Now that you’ve provided a high-level overview of your dissertation or thesis, it’s time to go a little deeper and lay a foundation for your research topic. This foundation is what the second ingredient is all about – the background to your study.

So, what is the background section all about?

Well, this section of your introduction chapter should provide a broad overview of the topic area that you’ll be researching, as well as the current contextual factors . This could include, for example, a brief history of the topic, recent developments in the area, key pieces of research in the area and so on. In other words, in this section, you need to provide the relevant background information to give the reader a decent foundational understanding of your research area.

Let’s look at an example to make this a little more concrete.

If we stick with the skills development topic I mentioned earlier, the background to the study section would start by providing an overview of the skills development area and outline the key existing research. Then, it would go on to discuss how the modern-day context has created a new challenge for traditional skills development strategies and approaches. Specifically, that in many industries, technical knowledge is constantly and rapidly evolving, and traditional education providers struggle to keep up with the pace of new technologies.

Importantly, you need to write this section with the assumption that the reader is not an expert in your topic area. So, if there are industry-specific jargon and complex terminology, you should briefly explain that here , so that the reader can understand the rest of your document.

Don’t make assumptions about the reader’s knowledge – in most cases, your markers will not be able to ask you questions if they don’t understand something. So, always err on the safe side and explain anything that’s not common knowledge.

Dissertation Coaching

#3 – The research problem

Now that you’ve given your reader an overview of your research area, it’s time to get specific about the research problem that you’ll address in your dissertation or thesis. While the background section would have eluded to a potential research problem (or even multiple research problems), the purpose of this section is to narrow the focus and highlight the specific research problem you’ll focus on.

But, what exactly is a research problem, you ask?

Well, a research problem can be any issue or question for which there isn’t already a well-established and agreed-upon answer in the existing research. In other words, a research problem exists when there’s a need to answer a question (or set of questions), but there’s a gap in the existing literature , or the existing research is conflicting and/or inconsistent.

So, to present your research problem, you need to make it clear what exactly is missing in the current literature and why this is a problem . It’s usually a good idea to structure this discussion into three sections – specifically:

  • What’s already well-established in the literature (in other words, the current state of research)
  • What’s missing in the literature (in other words, the literature gap)
  • Why this is a problem (in other words, why it’s important to fill this gap)

Let’s look at an example of this structure using the skills development topic.

Organisational skills development is critically important for employee satisfaction and company performance (reference). Numerous studies have investigated strategies and approaches to manage skills development programs within organisations (reference).

(this paragraph explains what’s already well-established in the literature)

However, these studies have traditionally focused on relatively slow-paced industries where key skills and knowledge do not change particularly often. This body of theory presents a problem for industries that face a rapidly changing skills landscape – for example, the website development industry – where new platforms, languages and best practices emerge on an extremely frequent basis.

(this paragraph explains what’s missing from the literature)

As a result, the existing research is inadequate for industries in which essential knowledge and skills are constantly and rapidly evolving, as it assumes a slow pace of knowledge development. Industries in such environments, therefore, find themselves ill-equipped in terms of skills development strategies and approaches.

(this paragraph explains why the research gap is problematic)

As you can see in this example, in a few lines, we’ve explained (1) the current state of research, (2) the literature gap and (3) why that gap is problematic. By doing this, the research problem is made crystal clear, which lays the foundation for the next ingredient.

#4 – The research aims, objectives and questions

Now that you’ve clearly identified your research problem, it’s time to identify your research aims and objectives , as well as your research questions . In other words, it’s time to explain what you’re going to do about the research problem.

So, what do you need to do here?

Well, the starting point is to clearly state your research aim (or aims) . The research aim is the main goal or the overarching purpose of your dissertation or thesis. In other words, it’s a high-level statement of what you’re aiming to achieve.

Let’s look at an example, sticking with the skills development topic:

“Given the lack of research regarding organisational skills development in fast-moving industries, this study will aim to identify and evaluate the skills development approaches utilised by web development companies in the UK”.

As you can see in this example, the research aim is clearly outlined, as well as the specific context in which the research will be undertaken (in other words, web development companies in the UK).

Next up is the research objective (or objectives) . While the research aims cover the high-level “what”, the research objectives are a bit more practically oriented, looking at specific things you’ll be doing to achieve those research aims.

Let’s take a look at an example of some research objectives (ROs) to fit the research aim.

  • RO1 – To identify common skills development strategies and approaches utilised by web development companies in the UK.
  • RO2 – To evaluate the effectiveness of these strategies and approaches.
  • RO3 – To compare and contrast these strategies and approaches in terms of their strengths and weaknesses.

As you can see from this example, these objectives describe the actions you’ll take and the specific things you’ll investigate in order to achieve your research aims. They break down the research aims into more specific, actionable objectives.

The final step is to state your research questions . Your research questions bring the aims and objectives another level “down to earth”. These are the specific questions that your dissertation or theses will seek to answer. They’re not fluffy, ambiguous or conceptual – they’re very specific and you’ll need to directly answer them in your conclusions chapter .

The research questions typically relate directly to the research objectives and sometimes can look a bit obvious, but they are still extremely important. Let’s take a look at an example of the research questions (RQs) that would flow from the research objectives I mentioned earlier.

  • RQ1 – What skills development strategies and approaches are currently being used by web development companies in the UK?
  • RQ2 – How effective are each of these strategies and approaches?
  • RQ3 – What are the strengths and weaknesses of each of these strategies and approaches?

As you can see, the research questions mimic the research objectives , but they are presented in question format. These questions will act as the driving force throughout your dissertation or thesis – from the literature review to the methodology and onward – so they’re really important.

A final note about this section – it’s really important to be clear about the scope of your study (more technically, the delimitations ). In other words, what you WILL cover and what you WON’T cover. If your research aims, objectives and questions are too broad, you’ll risk losing focus or investigating a problem that is too big to solve within a single dissertation.

Simply put, you need to establish clear boundaries in your research. You can do this, for example, by limiting it to a specific industry, country or time period. That way, you’ll ringfence your research, which will allow you to investigate your topic deeply and thoroughly – which is what earns marks!

Need a helping hand?

thesis chapter abstract

#5 – Significance

Now that you’ve made it clear what you’ll be researching, it’s time to make a strong argument regarding your study’s importance and significance . In other words, now that you’ve covered the what, it’s time to cover the why – enter essential ingredient number 5 – significance.

Of course, by this stage, you’ve already briefly alluded to the importance of your study in your background and research problem sections, but you haven’t explicitly stated how your research findings will benefit the world . So, now’s your chance to clearly state how your study will benefit either industry , academia , or – ideally – both . In other words, you need to explain how your research will make a difference and what implications it will have.

Let’s take a look at an example.

“This study will contribute to the body of knowledge on skills development by incorporating skills development strategies and approaches for industries in which knowledge and skills are rapidly and constantly changing. This will help address the current shortage of research in this area and provide real-world value to organisations operating in such dynamic environments.”

As you can see in this example, the paragraph clearly explains how the research will help fill a gap in the literature and also provide practical real-world value to organisations.

This section doesn’t need to be particularly lengthy, but it does need to be convincing . You need to “sell” the value of your research here so that the reader understands why it’s worth committing an entire dissertation or thesis to it. This section needs to be the salesman of your research. So, spend some time thinking about the ways in which your research will make a unique contribution to the world and how the knowledge you create could benefit both academia and industry – and then “sell it” in this section.

studying and prep for henley exams

#6 – The limitations

Now that you’ve “sold” your research to the reader and hopefully got them excited about what’s coming up in the rest of your dissertation, it’s time to briefly discuss the potential limitations of your research.

But you’re probably thinking, hold up – what limitations? My research is well thought out and carefully designed – why would there be limitations?

Well, no piece of research is perfect . This is especially true for a dissertation or thesis – which typically has a very low or zero budget, tight time constraints and limited researcher experience. Generally, your dissertation will be the first or second formal research project you’ve ever undertaken, so it’s unlikely to win any research awards…

Simply put, your research will invariably have limitations. Don’t stress yourself out though – this is completely acceptable (and expected). Even “professional” research has limitations – as I said, no piece of research is perfect. The key is to recognise the limitations upfront and be completely transparent about them, so that future researchers are aware of them and can improve the study’s design to minimise the limitations and strengthen the findings.

Generally, you’ll want to consider at least the following four common limitations. These are:

  • Your scope – for example, perhaps your focus is very narrow and doesn’t consider how certain variables interact with each other.
  • Your research methodology – for example, a qualitative methodology could be criticised for being overly subjective, or a quantitative methodology could be criticised for oversimplifying the situation (learn more about methodologies here ).
  • Your resources – for example, a lack of time, money, equipment and your own research experience.
  • The generalisability of your findings – for example, the findings from the study of a specific industry or country can’t necessarily be generalised to other industries or countries.

Don’t be shy here. There’s no use trying to hide the limitations or weaknesses of your research. In fact, the more critical you can be of your study, the better. The markers want to see that you are aware of the limitations as this demonstrates your understanding of research design – so be brutal.

#7 – The structural outline

Now that you’ve clearly communicated what your research is going to be about, why it’s important and what the limitations of your research will be, the final ingredient is the structural outline.The purpose of this section is simply to provide your reader with a roadmap of what to expect in terms of the structure of your dissertation or thesis.

In this section, you’ll need to provide a brief summary of each chapter’s purpose and contents (including the introduction chapter). A sentence or two explaining what you’ll do in each chapter is generally enough to orient the reader. You don’t want to get too detailed here – it’s purely an outline, not a summary of your research.

Let’s look at an example:

In Chapter One, the context of the study has been introduced. The research objectives and questions have been identified, and the value of such research argued. The limitations of the study have also been discussed.

In Chapter Two, the existing literature will be reviewed and a foundation of theory will be laid out to identify key skills development approaches and strategies within the context of fast-moving industries, especially technology-intensive industries.

In Chapter Three, the methodological choices will be explored. Specifically, the adoption of a qualitative, inductive research approach will be justified, and the broader research design will be discussed, including the limitations thereof.

So, as you can see from the example, this section is simply an outline of the chapter structure, allocating a short paragraph to each chapter. Done correctly, the outline will help your reader understand what to expect and reassure them that you’ll address the multiple facets of the study.

By the way – if you’re unsure of how to structure your dissertation or thesis, be sure to check out our video post which explains dissertation structure .

Keep calm and carry on.

Hopefully you feel a bit more prepared for this challenge of crafting your dissertation or thesis introduction chapter now. Take a deep breath and remember that Rome wasn’t built in a day – conquer one ingredient at a time and you’ll be firmly on the path to success.

Let’s quickly recap – the 7 ingredients are:

  • The opening section – where you give a brief, high-level overview of what your research will be about.
  • The study background – where you introduce the reader to key theory, concepts and terminology, as well as the context of your study.
  • The research problem – where you explain what the problem with the current research is. In other words, the research gap.
  • The research aims , objectives and questions – where you clearly state what your dissertation will investigate.
  • The significance – where you explain what value your research will provide to the world.
  • The limitations – where you explain what the potential shortcomings and limitations of your research may be.
  • The structural outline – where you provide a high-level overview of the structure of your document

If you bake these ingredients into your dissertation introduction chapter, you’ll be well on your way to building an engaging introduction chapter that lays a rock-solid foundation for the rest of your document.

Remember, while we’ve covered the essential ingredients here, there may be some additional components that your university requires, so be sure to double-check your project brief!

thesis chapter abstract

Psst… there’s more (for free)

This post is part of our dissertation mini-course, which covers everything you need to get started with your dissertation, thesis or research project. 

You Might Also Like:

How to write the discussion chapter

40 Comments

Derique

Thanks very much for such an insight. I feel confident enough in undertaking my thesis on the survey;The future of facial recognition and learning non verbal interaction

Derek Jansen

Glad to hear that. Good luck with your thesis!

Thanks very much for such an insight. I feel confident now undertaking my thesis; The future of facial recognition and learning non verbal interaction.

Emmanuel Chukwuebuka Okoli

Thanks so much for this article. I found myself struggling and wasting a lot of time in my thesis writing but after reading this article and watching some of your youtube videos, I now have a clear understanding of what is required for a thesis.

Saima Kashif

Thank you Derek, i find your each post so useful. Keep it up.

Aletta

Thank you so much Derek ,for shedding the light and making it easier for me to handle the daunting task of academic writing .

Alice kasaka

Thanks do much Dereck for the comprehensive guide. It will assist me queit a lot in my thesis.

dawood

thanks a lot for helping

SALly henderson

i LOVE the gifs, such a fun way to engage readers. thanks for the advice, much appreciated

NAG

Thanks a lot Derek! It will be really useful to the beginner in research!

Derek Jansen

You’re welcome

ravi

This is a well written, easily comprehensible, simple introduction to the basics of a Research Dissertation../the need to keep the reader in mind while writing the dissertation is an important point that is covered../ I appreciate the efforts of the author../

Laxmi kanta Sharma

The instruction given are perfect and clear. I was supposed to take the course , unfortunately in Nepal the service is not avaialble.However, I am much more hopeful that you will provide require documents whatever you have produced so far.

Halima Ringim

Thank you very much

Shamim Nabankema

Thanks so much ❤️😘 I feel am ready to start writing my research methodology

Sapphire Kellichan

This is genuinely the most effective advice I have ever been given regarding academia. Thank you so much!

Abdul

This is one of the best write up I have seen in my road to PhD thesis. regards, this write up update my knowledge of research

Amelia

I was looking for some good blogs related to Education hopefully your article will help. Thanks for sharing.

Dennis

This is an awesome masterpiece. It is one of the most comprehensive guides to writing a Dissertation/Thesis I have seen and read.

You just saved me from going astray in writing a Dissertation for my undergraduate studies. I could not be more grateful for such a relevant guide like this. Thank you so much.

Maria

Thank you so much Derek, this has been extremely helpful!!

I do have one question though, in the limitations part do you refer to the scope as the focus of the research on a specific industry/country/chronological period? I assume that in order to talk about whether or not the research could be generalized, the above would need to be already presented and described in the introduction.

Thank you again!

Jackson Lubari Wani

Phew! You have genuinely rescued me. I was stuck how to go about my thesis. Now l have started. Thank you.

Valmont Dain

This is the very best guide in anything that has to do with thesis or dissertation writing. The numerous blends of examples and detailed insights make it worth a read and in fact, a treasure that is worthy to be bookmarked.

Thanks a lot for this masterpiece!

Steve

Powerful insight. I can now take a step

Bayaruna

Thank you very much for these valuable introductions to thesis chapters. I saw all your videos about writing the introduction, discussion, and conclusion chapter. Then, I am wondering if we need to explain our research limitations in all three chapters, introduction, discussion, and conclusion? Isn’t it a bit redundant? If not, could you please explain how can we write in different ways? Thank you.

Md. Abdullah-Al-mahbub

Excellent!!! Thank you…

shahrin

Thanks for this informative content. I have a question. The research gap is mentioned in both the introduction and literature section. I would like to know how can I demonstrate the research gap in both sections without repeating the contents?

Sarah

I’m incredibly grateful for this invaluable content. I’ve been dreading compiling my postgrad thesis but breaking each chapter down into sections has made it so much easier for me to engage with the material without feeling overwhelmed. After relying on your guidance, I’m really happy with how I’ve laid out my introduction.

mahdi

Thank you for the informative content you provided

Steven

Hi Derrick and Team, thank you so much for the comprehensive guide on how to write a dissertation or a thesis introduction section. For some of us first-timers, it is a daunting task. However, the instruction with relevant examples makes it clear and easy to follow through. Much appreciated.

Raza Bukhari

It was so helpful. God Bless you. Thanks very much

beza

I thank you Grad coach for your priceless help. I have two questions I have learned from your video the limitations of the research presented in chapter one. but in another video also presented in chapter five. which chapter limitation should be included? If possible, I need your answer since I am doing my thesis. how can I explain If I am asked what is my motivation for this research?

Simon Musa Wuranjiya

Thank you guys for the great work you are doing. Honestly, you have made the research to be interesting and simplified. Even a novice will easily grasp the ideas you put forward, Thank you once again.

Natalie

Excellent piece!

Simon

I feel like just settling for a good topic is usually the hardest part.

Kate

Thank you so much. My confidence has been completely destroyed during my first year of PhD and you have helped me pull myself together again

Happy to help 🙂

Linda Adhoch

I am so glad I ran into your resources and did not waste time doing the wrong this. Research is now making so much sense now.

Danyal Ahmad

Gratitude to Derrick and the team I was looking for a solid article that would aid me in drafting the thesis’ introduction. I felt quite happy when I came across the piece you wrote because it was so well-written and insightful. I wish you success in the future.

ria M

thank you so much. God Bless you

Arnold C

Thank you so much Grad Coach for these helpful insights. Now I can get started, with a great deal of confidence.

Submit a Comment Cancel reply

Your email address will not be published. Required fields are marked *

Save my name, email, and website in this browser for the next time I comment.

  • Print Friendly

Thesis and Dissertation Guide

  • « Thesis & Dissertation Resources
  • The Graduate School Home

pdf icon

  • Introduction

Copyright Page

Dedication, acknowledgements, preface (optional), table of contents.

  • List of Tables, Figures, and Illustrations

List of Abbreviations

List of symbols.

  • Non-Traditional Formats
  • Font Type and Size
  • Spacing and Indentation
  • Tables, Figures, and Illustrations
  • Formatting Previously Published Work
  • Internet Distribution
  • Open Access
  • Registering Copyright
  • Using Copyrighted Materials
  • Use of Your Own Previously Published Materials
  • Submission Steps
  • Submission Checklist
  • Sample Pages

Thesis and Dissertation Guide

I. Order and Components

Please see the sample thesis or dissertation pages throughout and at the end of this document for illustrations. The following order is required for components of your thesis or dissertation:

  • Dedication, Acknowledgements, and Preface (each optional)
  • Table of Contents, with page numbers
  • List of Tables, List of Figures, or List of Illustrations, with titles and page numbers (if applicable)
  • List of Abbreviations (if applicable)
  • List of Symbols (if applicable)
  • Introduction, if any
  • Main body, with consistent subheadings as appropriate
  • Appendices (if applicable)
  • Endnotes (if applicable)
  • References (see section on References for options)

Many of the components following the title and copyright pages have required headings and formatting guidelines, which are described in the following sections.

Please consult the Sample Pages to compare your document to the requirements. A Checklist is provided to assist you in ensuring your thesis or dissertation meets all formatting guidelines.

The title page of a thesis or dissertation must include the following information:

Title Page with mesaurements described in surrounding text

  • The title of the thesis or dissertation in all capital letters and centered 2″ below the top of the page.
  • Your name, centered 1″ below the title. Do not include titles, degrees, or identifiers. The name you use here does not need to exactly match the name on your university records, but we recommend considering how you will want your name to appear in professional publications in the future.

Notes on this statement:

  • When indicating your degree in the second bracketed space, use the full degree name (i.e., Doctor of Philosophy, not Ph.D. or PHD; Master of Public Health, not M.P.H. or MPH; Master of Social Work, not M.S.W. or MSW).
  • List your department, school, or curriculum rather than your subject area or specialty discipline in the third bracketed space. You may include your subject area or specialty discipline in parentheses (i.e., Department of Romance Languages (French); School of Pharmacy (Molecular Pharmaceutics); School of Education (School Psychology); or similar official area).
  • If you wish to include both your department and school names, list the school at the end of the statement (i.e., Department of Pharmacology in the School of Medicine).
  • A dissertation submitted to the faculty at the University of North Carolina at Chapel Hill in partial fulfillment of the requirements for the degree of Doctor of Philosophy in the Department of Public Policy.
  • A thesis submitted to the faculty at the University of North Carolina at Chapel Hill in partial fulfillment of the requirements for the degree of Master of Science in the School of Dentistry (Endodontics).
  • A thesis submitted to the faculty at the University of North Carolina at Chapel Hill in partial fulfillment of the requirements for the degree of Master of Science in the Department of Nutrition in the Gillings School of Global Public Health.
  • A dissertation submitted to the faculty at the University of North Carolina at Chapel Hill in partial fulfillment of the requirements for the degree of Doctor of Philosophy in the School of Education (Cultural Studies and Literacies).
  • The words “Chapel Hill” must be centered 1″ below the statement.
  • One single-spaced line below that, center the year in which your committee approves the completed thesis or dissertation. This need not be the year you graduate.
  • Approximately 2/3 of the way across the page on the right-hand side of the page, 1″ below the year, include the phrase “Approved by:” (with colon) followed by each faculty member's name on subsequent double-spaced lines. Do not include titles such as Professor, Doctor, Dr., PhD, or any identifiers such as “chair” or “advisor” before or after any names. Line up the first letter of each name on the left under the “A” in the “Approved by:” line. If a name is too long to fit on one line, move this entire section of text slightly to the left so that formatting can be maintained.
  • No signatures, signature lines, or page numbers should be included on the title page.

Include a copyright page with the following information single-spaced and centered 2″ above the bottom of the page:

Copyright Page with mesaurements described in surrounding text

© Year Author's Full Name (as it appears on the title page) ALL RIGHTS RESERVED

This page immediately follows the title page. It should be numbered with the lower case Roman numeral ii centered with a 1/2″ margin from the bottom edge.

Inclusion of this page offers you, as the author, additional protection against copyright infringement as it eliminates any question of authorship and copyright ownership. You do not need to file for copyright in order to include this statement in your thesis or dissertation. However, filing for copyright can offer other protections.

See Section IV for more information on copyrighting your thesis or dissertation.

Include an abstract page following these guidelines:

Abstract page with mesaurements described in surrounding text

  • Include the heading “ABSTRACT” in all capital letters, and center it 2″ below the top of the page.
  • One double-spaced line below “ABSTRACT”, center your name, followed by a colon and the title of the thesis or dissertation. Use as many lines as necessary. Be sure that your name and the title exactly match the name and title used on the Title page.
  • One single-spaced line below the title, center the phrase “(Under the direction of [advisor's name])”. Include the phrase in parentheses. Include the first and last name(s) of your advisor or formal co-advisors. Do not include the name of other committee members. Use the advisor's name only; do not include any professional titles such as PhD, Professor, or Dr. or any identifiers such as “chair” or “advisor”.
  • Skip one double-spaced line and begin the abstract. The text of your abstract must be double-spaced and aligned with the document's left margin with the exception of indenting new paragraphs. Do not center or right-justify the abstract.
  • Abstracts cannot exceed 150 words for a thesis or 350 words for a dissertation.
  • Number the abstract page with the lower case Roman numeral iii (and iv, if more than one page) centered with a 1/2″ margin from the bottom edge.

Please write and proofread your abstract carefully. When possible, avoid including symbols or foreign words in your abstract, as they cannot be indexed or searched. Avoid mathematical formulas, diagrams, and other illustrative materials in the abstract. Offer a brief description of your thesis or dissertation and a concise summary of its conclusions. Be sure to describe the subject and focus of your work with clear details and avoid including lengthy explanations or opinions.

Your title and abstract will be used by search engines to help potential audiences locate your work, so clarity will help to draw the attention of your targeted readers.

You have an option to include a dedication, acknowledgements, or preface. If you choose to include any or all of these elements, give each its own page(s).

Dedication page with mesaurements described in surrounding text

A dedication is a message from the author prefixed to a work in tribute to a person, group, or cause. Most dedications are short statements of tribute beginning with “To…” such as “To my family”.

Acknowledgements are the author's statement of gratitude to and recognition of the people and institutions that helped the author's research and writing.

A preface is a statement of the author's reasons for undertaking the work and other personal comments that are not directly germane to the materials presented in other sections of the thesis or dissertation. These reasons tend to be of a personal nature.

Any of the pages must be prepared following these guidelines:

  • Do not place a heading on the dedication page.
  • The text of short dedications must be centered and begin 2″ from the top of the page.
  • Headings are required for the “ACKNOWLEDGEMENTS” and “PREFACE” pages. Headings must be in all capital letters and centered 2″ below the top of the page.
  • The text of the acknowledgements and preface pages must begin one double-spaced line below the heading, be double-spaced, and be aligned with the document's left margin with the exception of indenting new paragraphs.
  • Subsequent pages of text return to the 1″ top margin.
  • The page(s) must be numbered with consecutive lower case Roman numerals (starting with the page number after the abstract) centered with a 1/2″ margin from the bottom edge.

Include a table of contents following these guidelines:

Table of Contents page with mesaurements described in surrounding text

  • Include the heading “TABLE OF CONTENTS” in all capital letters, and center it 2″ below the top of the page.
  • Include one double-spaced line between the heading and the first entry.
  • The table of contents should not contain listings for the pages that precede it, but it must list all parts of the thesis or dissertation that follow it.
  • If relevant, be sure to list all appendices and a references section in your table of contents. Include page numbers for these items but do not assign separate chapter numbers.
  • Entries must align with the document's left margin or be indented to the right of the left page margin using consistent tabs.
  • Major subheadings within chapters must be included in the table of contents. The subheading(s) should be indented to the right of the left page margin using consistent tabs.
  • If an entry takes up more than one line, break up the entry about three-fourths of the way across the page and place the rest of the text on a second line, single-spacing the two lines.
  • Include one double-spaced line between each entry.
  • Page numbers listed in the table of contents must be located just inside the right page margin with leaders (lines of periods) filling out the space between the end of the entry and the page number. The last digit of each number must line up on the right margin.
  • Information included in the table of contents must match the headings, major subheadings, and numbering used in the body of the thesis or dissertation.
  • The Table of Contents page(s) must be numbered with consecutive lower case Roman numerals centered with a 1/2″ margin from the bottom edge.

Lists of Tables, Figures, and Illustrations

If applicable, include a list of tables, list of figures, and/or list of illustrations following these guidelines:

Lists of Figures page with mesaurements described in surrounding text

  • Include the heading(s) in all capital letters, centered 1″ below the top of the page.
  • Each entry must include a number, title, and page number.
  • Assign each table, figure, or illustration in your thesis or dissertation an Arabic numeral. You may number consecutively throughout the entire work (e.g., Figure 1, Figure 2, etc.), or you may assign a two-part Arabic numeral with the first number designating the chapter in which it appears, separated by a period, followed by a second number to indicate its consecutive placement in the chapter (e.g., Table 3.2 is the second table in Chapter Three).
  • Numerals and titles must align with the document's left margin or be indented to the right of the left page margin using consistent tabs.
  • Page numbers must be located just inside the right page margin with leaders (lines of periods) filling out the space between the end of the entry and the page number. The last digit of each number must line up on the right margin.
  • Numbers, titles, and page numbers must each match the corresponding numbers, titles, and page numbers appearing in the thesis or dissertation.
  • All Lists of Tables, Figures, and Illustrations page(s) must be numbered with consecutive lower case Roman numerals centered with a 1/2″ margin from the bottom edge.

If you use abbreviations extensively in your thesis or dissertation, you must include a list of abbreviations and their corresponding definitions following these guidelines:

List of Abbreviations with mesaurements described in surrounding text

  • Include the heading “LIST OF ABBREVIATIONS” in all capital letters, and center it 1″ below the top of the page.
  • Arrange your abbreviations alphabetically.
  • Abbreviations must align with the document's left margin or be indented to the right of the left page margin using consistent tabs.
  • If an entry takes up more than one line, single-space between the two lines.
  • The List of Abbreviations page(s) must be numbered with consecutive lower case Roman numerals centered with a 1/2″ margin from the bottom edge.

If you use symbols in your thesis or dissertation, you may combine them with your abbreviations, titling the section “LIST OF ABBREVIATIONS AND SYMBOLS”, or you may set up a separate list of symbols and their definitions by following the formatting instructions above for abbreviations. The heading you choose must be in all capital letters and centered 1″ below the top of the page.

Previous: Introduction

Next: Format

Have a language expert improve your writing

Run a free plagiarism check in 10 minutes, automatically generate references for free.

  • Knowledge Base
  • Dissertation
  • Dissertation & Thesis Outline | Example & Free Templates

Dissertation & Thesis Outline | Example & Free Templates

Published on 8 June 2022 by Tegan George .

A thesis or dissertation outline is one of the most critical early steps in your writing process . It helps you to lay out and organise your ideas and can provide you with a roadmap for deciding what kind of research you’d like to undertake.

Generally, an outline contains information on the different sections included in your thesis or dissertation, such as:

  • Your anticipated title
  • Your abstract
  • Your chapters (sometimes subdivided into further topics like literature review, research methods, avenues for future research, etc.)

In the final product, you can also provide a chapter outline for your readers. This is a short paragraph at the end of your introduction to inform readers about the organisational structure of your thesis or dissertation . This chapter outline is also known as a reading guide or summary outline.

Table of contents

How to outline your thesis or dissertation, dissertation and thesis outline templates, chapter outline example, sample sentences for your chapter outline, sample verbs for variation in your chapter outline, frequently asked questions about outlines.

While there are some inter-institutional differences, many outlines proceed in a fairly similar fashion.

  • Working Title
  • ‘Elevator pitch’ of your work (often written last).
  • Introduce your area of study, sharing details about your research question, problem statement , and hypotheses . Situate your research within an existing paradigm or conceptual or theoretical framework .
  • Subdivide as you see fit into main topics and sub-topics.
  • Describe your research methods (e.g., your scope, population , and data collection ).
  • Present your research findings and share about your data analysis methods.
  • Answer the research question in a concise way.
  • Interpret your findings, discuss potential limitations of your own research and speculate about future implications or related opportunities.

To help you get started, we’ve created a full thesis or dissertation template in Word or Google Docs format. It’s easy adapt it to your own requirements.

 Download Word template    Download Google Docs template

Chapter outline example British English

It can be easy to fall into a pattern of overusing the same words or sentence constructions, which can make your work monotonous and repetitive for your readers. Consider utilising some of the alternative constructions presented below.

Example 1: Passive construction

The passive voice is a common choice for outlines and overviews because the context makes it clear who is carrying out the action (e.g., you are conducting the research ). However, overuse of the passive voice can make your text vague and imprecise.

Example 2: IS-AV construction

You can also present your information using the ‘IS-AV’ (inanimate subject with an active verb) construction.

A chapter is an inanimate object, so it is not capable of taking an action itself (e.g., presenting or discussing). However, the meaning of the sentence is still easily understandable, so the IS-AV construction can be a good way to add variety to your text.

Example 3: The I construction

Another option is to use the ‘I’ construction, which is often recommended by style manuals (e.g., APA Style and Chicago style ). However, depending on your field of study, this construction is not always considered professional or academic. Ask your supervisor if you’re not sure.

Example 4: Mix-and-match

To truly make the most of these options, consider mixing and matching the passive voice , IS-AV construction , and ‘I’ construction .This can help the flow of your argument and improve the readability of your text.

As you draft the chapter outline, you may also find yourself frequently repeating the same words, such as ‘discuss’, ‘present’, ‘prove’, or ‘show’. Consider branching out to add richness and nuance to your writing. Here are some examples of synonyms you can use.

A thesis or dissertation outline is one of the most critical first steps in your writing process. It helps you to lay out and organise your ideas and can provide you with a roadmap for deciding what kind of research you’d like to undertake.

When you mention different chapters within your text, it’s considered best to use Roman numerals for most citation styles. However, the most important thing here is to remain consistent whenever using numbers in your dissertation .

All level 1 and 2 headings should be included in your table of contents . That means the titles of your chapters and the main sections within them.

The contents should also include all appendices and the lists of tables and figures, if applicable, as well as your reference list .

Do not include the acknowledgements or abstract   in the table of contents.

Cite this Scribbr article

If you want to cite this source, you can copy and paste the citation or click the ‘Cite this Scribbr article’ button to automatically add the citation to our free Reference Generator.

George, T. (2022, June 08). Dissertation & Thesis Outline | Example & Free Templates. Scribbr. Retrieved 22 February 2024, from https://www.scribbr.co.uk/thesis-dissertation/outline-thesis-dissertation/

Is this article helpful?

Tegan George

Tegan George

Other students also liked, dissertation table of contents in word | instructions & examples, how to write a dissertation proposal | a step-by-step guide, thesis & dissertation acknowledgements | tips & examples.

Book cover

Mastering Your Dissertation pp 131–135 Cite as

Does my Dissertation Need an Abstract?

Writing the Abstract

  • Sue Reeves   ORCID: orcid.org/0000-0002-3017-0559 3 &
  • Bartek Buczkowski   ORCID: orcid.org/0000-0002-4146-3664 4  
  • First Online: 19 October 2023

147 Accesses

The abstract is written when all the other elements of your dissertation or thesis are completed, and you know the story of your research. The abstract is a concise yet informative summary of your research. In this chapter, we explore the purpose of the abstract, its contents, guidance as to the different elements that are included, and differences between structured and unstructured abstracts. A checklist for writing the abstract is provided.

  • Structured abstract
  • Unstructured abstract

This is a preview of subscription content, log in via an institution .

Buying options

  • Available as EPUB and PDF
  • Read on any device
  • Instant download
  • Own it forever
  • Compact, lightweight edition
  • Dispatched in 3 to 5 business days
  • Free shipping worldwide - see info

Tax calculation will be finalised at checkout

Purchases are for personal use only

Further Reading

Willis M (2023) Read this before you write your abstract. Times higher education. Available at: https://www.timeshighereducation.com/campus/read-you-write-your-abstract . Accessed on 4 March 2023.

Download references

Author information

Authors and affiliations.

University of Roehampton, London, UK

Manchester Metropolitan University, Manchester, UK

Bartek Buczkowski

You can also search for this author in PubMed   Google Scholar

Rights and permissions

Reprints and permissions

Copyright information

© 2023 The Author(s), under exclusive license to Springer Nature Switzerland AG

About this chapter

Cite this chapter.

Reeves, S., Buczkowski, B. (2023). Does my Dissertation Need an Abstract?. In: Mastering Your Dissertation. Springer, Cham. https://doi.org/10.1007/978-3-031-41911-9_12

Download citation

DOI : https://doi.org/10.1007/978-3-031-41911-9_12

Published : 19 October 2023

Publisher Name : Springer, Cham

Print ISBN : 978-3-031-41910-2

Online ISBN : 978-3-031-41911-9

eBook Packages : Biomedical and Life Sciences Biomedical and Life Sciences (R0)

Share this chapter

Anyone you share the following link with will be able to read this content:

Sorry, a shareable link is not currently available for this article.

Provided by the Springer Nature SharedIt content-sharing initiative

  • Publish with us

Policies and ethics

  • Find a journal
  • Track your research

Elsevier QRcode Wechat

  • Manuscript Preparation

Know How to Structure Your PhD Thesis

  • 4 minute read
  • 29.7K views

Table of Contents

In your academic career, few projects are more important than your PhD thesis. Unfortunately, many university professors and advisors assume that their students know how to structure a PhD. Books have literally been written on the subject, but there’s no need to read a book in order to know about PhD thesis paper format and structure. With that said, however, it’s important to understand that your PhD thesis format requirement may not be the same as another student’s. The bottom line is that how to structure a PhD thesis often depends on your university and department guidelines.

But, let’s take a look at a general PhD thesis format. We’ll look at the main sections, and how to connect them to each other. We’ll also examine different hints and tips for each of the sections. As you read through this toolkit, compare it to published PhD theses in your area of study to see how a real-life example looks.

Main Sections of a PhD Thesis

In almost every PhD thesis or dissertation, there are standard sections. Of course, some of these may differ, depending on your university or department requirements, as well as your topic of study, but this will give you a good idea of the basic components of a PhD thesis format.

  • Abstract : The abstract is a brief summary that quickly outlines your research, touches on each of the main sections of your thesis, and clearly outlines your contribution to the field by way of your PhD thesis. Even though the abstract is very short, similar to what you’ve seen in published research articles, its impact shouldn’t be underestimated. The abstract is there to answer the most important question to the reviewer. “Why is this important?”
  • Introduction : In this section, you help the reviewer understand your entire dissertation, including what your paper is about, why it’s important to the field, a brief description of your methodology, and how your research and the thesis are laid out. Think of your introduction as an expansion of your abstract.
  • Literature Review : Within the literature review, you are making a case for your new research by telling the story of the work that’s already been done. You’ll cover a bit about the history of the topic at hand, and how your study fits into the present and future.
  • Theory Framework : Here, you explain assumptions related to your study. Here you’re explaining to the review what theoretical concepts you might have used in your research, how it relates to existing knowledge and ideas.
  • Methods : This section of a PhD thesis is typically the most detailed and descriptive, depending of course on your research design. Here you’ll discuss the specific techniques you used to get the information you were looking for, in addition to how those methods are relevant and appropriate, as well as how you specifically used each method described.
  • Results : Here you present your empirical findings. This section is sometimes also called the “empiracles” chapter. This section is usually pretty straightforward and technical, and full of details. Don’t shortcut this chapter.
  • Discussion : This can be a tricky chapter, because it’s where you want to show the reviewer that you know what you’re talking about. You need to speak as a PhD versus a student. The discussion chapter is similar to the empirical/results chapter, but you’re building on those results to push the new information that you learned, prior to making your conclusion.
  • Conclusion : Here, you take a step back and reflect on what your original goals and intentions for the research were. You’ll outline them in context of your new findings and expertise.

Tips for your PhD Thesis Format

As you put together your PhD thesis, it’s easy to get a little overwhelmed. Here are some tips that might keep you on track.

  • Don’t try to write your PhD as a first-draft. Every great masterwork has typically been edited, and edited, and…edited.
  • Work with your thesis supervisor to plan the structure and format of your PhD thesis. Be prepared to rewrite each section, as you work out rough drafts. Don’t get discouraged by this process. It’s typical.
  • Make your writing interesting. Academic writing has a reputation of being very dry.
  • You don’t have to necessarily work on the chapters and sections outlined above in chronological order. Work on each section as things come up, and while your work on that section is relevant to what you’re doing.
  • Don’t rush things. Write a first draft, and leave it for a few days, so you can come back to it with a more critical take. Look at it objectively and carefully grammatical errors, clarity, logic and flow.
  • Know what style your references need to be in, and utilize tools out there to organize them in the required format.
  • It’s easier to accidentally plagiarize than you think. Make sure you’re referencing appropriately, and check your document for inadvertent plagiarism throughout your writing process.

PhD Thesis Editing Plus

Want some support during your PhD writing process? Our PhD Thesis Editing Plus service includes extensive and detailed editing of your thesis to improve the flow and quality of your writing. Unlimited editing support for guaranteed results. Learn more here , and get started today!

Journal Acceptance Rates

  • Publication Process

Journal Acceptance Rates: Everything You Need to Know

PowerPoint Presentation of Your Research Paper

  • Publication Recognition

How to Make a PowerPoint Presentation of Your Research Paper

You may also like.

Limitations of a Research

Can Describing Study Limitations Improve the Quality of Your Paper?

Guide to Crafting Impactful Sentences

A Guide to Crafting Shorter, Impactful Sentences in Academic Writing

Write an Excellent Discussion in Your Manuscript

6 Steps to Write an Excellent Discussion in Your Manuscript

How to Write Clear Civil Engineering Papers

How to Write Clear and Crisp Civil Engineering Papers? Here are 5 Key Tips to Consider

thesis chapter abstract

The Clear Path to An Impactful Paper: ②

Essentials of Writing to Communicate Research in Medicine

The Essentials of Writing to Communicate Research in Medicine

There are some recognizable elements and patterns often used for framing engaging sentences in English. Find here the sentence patterns in Academic Writing

Changing Lines: Sentence Patterns in Academic Writing

thesis chapter abstract

Path to An Impactful Paper: Common Manuscript Writing Patterns and Structure

Input your search keywords and press Enter.

  • Structuring your thesis
  • Information and services
  • Higher Degree by Research
  • HDR candidature support
  • How to write a thesis

The best structure for your HDR thesis will depend on your discipline and the research you aim to communicate.

Before you begin writing your thesis, make sure you've read our advice on thesis preparation for information on the requirements you'll need to meet.

Once you've done this, you can begin to think about how to structure your thesis. To help you get started, we've outlined a basic structure below, but the requirements for your discipline may be different .

If you need help determining a suitable structure:

  • read other theses in your discipline – you can search for UQ theses on the Library website. For prime examples, search for theses that received commendations from their examiners
  • check with your advisor.

A basic thesis structure includes the following sections:

Introduction and literature review

Results or findings.

An abstract is a summary of your entire thesis and should provide a complete overview of the thesis, including your key results and findings.

An abstract is different to your introduction, and shouldn't be used to advertise your thesis — it should provide enough information to allow readers to understand what they'll learn by reading the thesis.

Your abstract should answer the following questions:

  • What did you do?
  • How did you do it?
  • Why was it worth doing?
  • What were the key results?
  • What are the implications or significance of the results?

As your abstract will have a word limit, you may be unable to answer every question in detail. If you find yourself running out of words, make sure you include your key findings before other information.

All theses require introductions and literature reviews, but the structure and location of these can vary.

In some cases, your literature review will be incorporated into the introduction. You may also review literature in other parts of your thesis, such as in the methods section.

Other options for structuring an introduction and literature review include:

  • a brief introductory chapter with a longer, separate literature review chapter
  • a long introductory chapter with a brief introductory section followed by literature review sections
  • a brief introductory chapter with detailed literature reviews relevant to the topic of each chapter provided separately in each chapter — this is common in a thesis comprised of publications.

If you have a separate introduction and literature review, they should complement, not repeat, each other.

The introduction should outline the background and significance of the broad area of study, as well as your:

  • general aims – what you intend to contribute to the understanding of a topic
  • specific objectives – which particular aspects of that topic you'll be investigating
  • the rationale for proceeding in the way that you did
  • your motivation or the justification for your research – the level of detail can vary depending on how much detail you will be including in a literature review.

The literature review should provide a more detailed analysis of research in the field, and present more specific aims or hypotheses for your research. What's expected for a literature review varies depending on your:

  • program – a PhD thesis requires a more extensive literature review than an MPhil thesis
  • discipline – analyse well-written examples from your discipline to learn the conventions for content and structure.

To get some ideas about how to structure and integrate your literature review, look at how to write a literature review and an example analysis of a literature review , or talk to your advisor.

A possible structure for your methods section is to include an introduction that provides a justification and explanation of the methodological approach you chose, followed by relevant sub-sections. Some standard sub-sections of a methods chapter include:

  • Participants
  • Procedures.

How the methods section is structured can depend on your discipline, so review other theses from your discipline for ideas for structure.

Regardless of structure, the methods section should explain:

  • how you collected and analysed your data – you only need to include enough detail that another expert in the field could repeat what you've done (you don't have to detail field standard techniques or tests)
  • why you chose to collect specific data
  • how this data will help you to answer your research questions
  • why you chose the approach you went with.

You may want to present your results separately to your discussion. If so, use the results section to:

  • specify the data you collected and how it was were prepared for analysis
  • describe the data analysis (e.g. define the type of statistical test that was applied to the data)
  • describe the outcome of the analysis
  • present a summary and descriptive statistics in a table or graph.

Use tables and figures effectively

Reports usually include tables, graphs and other graphics to present data and supplement the text. To learn how to design and use these elements effectively, see our guides to:

  • incorporating tables, figures, statistics and equations (PDF, 1.2MB)
  • graphic presentation (PDF, 2.9MB) .

Use the discussion section to:

  • comment on your results and explain what they mean
  • compare, contrast and relate your results back to theory or the findings of other studies
  • identify and explain any unexpected results
  • identify any limitations to your research and any questions that your research was unable to answer
  • discuss the significance or implications of your results.

If you find that your research ends up in a different direction to what you intended, it can help to explicitly acknowledge this and explain why in this section.

Use the conclusion section to:

  • emphasise that you've met your research aims
  • summarise the main findings of your research
  • restate the limitations of your research and make suggestions for further research.

In some cases, the discussion and conclusion sections can be combined. Check with your advisor if you want to combine these sections.

  • Thesis writing tips

Learning Advisers

Our advisers can help undergraduate and postgraduate students in all programs clarify ideas from workshops, help you develop skills and give feedback on assignments.

How a Learning Adviser can help

Further support

Writing a clear and engaging research paper Thesis and dissertation writing: an examination of published advice and actual practice Scientific writing

Frequently asked questions

Where does the abstract go in a thesis or dissertation.

The abstract appears on its own page in the thesis or dissertation , after the title page and acknowledgements but before the table of contents .

Frequently asked questions: Dissertation

Dissertation word counts vary widely across different fields, institutions, and levels of education:

  • An undergraduate dissertation is typically 8,000–15,000 words
  • A master’s dissertation is typically 12,000–50,000 words
  • A PhD thesis is typically book-length: 70,000–100,000 words

However, none of these are strict guidelines – your word count may be lower or higher than the numbers stated here. Always check the guidelines provided by your university to determine how long your own dissertation should be.

A dissertation prospectus or proposal describes what or who you plan to research for your dissertation. It delves into why, when, where, and how you will do your research, as well as helps you choose a type of research to pursue. You should also determine whether you plan to pursue qualitative or quantitative methods and what your research design will look like.

It should outline all of the decisions you have taken about your project, from your dissertation topic to your hypotheses and research objectives , ready to be approved by your supervisor or committee.

Note that some departments require a defense component, where you present your prospectus to your committee orally.

A thesis is typically written by students finishing up a bachelor’s or Master’s degree. Some educational institutions, particularly in the liberal arts, have mandatory theses, but they are often not mandatory to graduate from bachelor’s degrees. It is more common for a thesis to be a graduation requirement from a Master’s degree.

Even if not mandatory, you may want to consider writing a thesis if you:

  • Plan to attend graduate school soon
  • Have a particular topic you’d like to study more in-depth
  • Are considering a career in research
  • Would like a capstone experience to tie up your academic experience

The conclusion of your thesis or dissertation should include the following:

  • A restatement of your research question
  • A summary of your key arguments and/or results
  • A short discussion of the implications of your research

The conclusion of your thesis or dissertation shouldn’t take up more than 5–7% of your overall word count.

For a stronger dissertation conclusion , avoid including:

  • Important evidence or analysis that wasn’t mentioned in the discussion section and results section
  • Generic concluding phrases (e.g. “In conclusion …”)
  • Weak statements that undermine your argument (e.g., “There are good points on both sides of this issue.”)

Your conclusion should leave the reader with a strong, decisive impression of your work.

While it may be tempting to present new arguments or evidence in your thesis or disseration conclusion , especially if you have a particularly striking argument you’d like to finish your analysis with, you shouldn’t. Theses and dissertations follow a more formal structure than this.

All your findings and arguments should be presented in the body of the text (more specifically in the discussion section and results section .) The conclusion is meant to summarize and reflect on the evidence and arguments you have already presented, not introduce new ones.

A theoretical framework can sometimes be integrated into a  literature review chapter , but it can also be included as its own chapter or section in your dissertation . As a rule of thumb, if your research involves dealing with a lot of complex theories, it’s a good idea to include a separate theoretical framework chapter.

A literature review and a theoretical framework are not the same thing and cannot be used interchangeably. While a theoretical framework describes the theoretical underpinnings of your work, a literature review critically evaluates existing research relating to your topic. You’ll likely need both in your dissertation .

While a theoretical framework describes the theoretical underpinnings of your work based on existing research, a conceptual framework allows you to draw your own conclusions, mapping out the variables you may use in your study and the interplay between them.

A thesis or dissertation outline is one of the most critical first steps in your writing process. It helps you to lay out and organize your ideas and can provide you with a roadmap for deciding what kind of research you’d like to undertake.

Generally, an outline contains information on the different sections included in your thesis or dissertation , such as:

  • Your anticipated title
  • Your abstract
  • Your chapters (sometimes subdivided into further topics like literature review , research methods , avenues for future research, etc.)

When you mention different chapters within your text, it’s considered best to use Roman numerals for most citation styles. However, the most important thing here is to remain consistent whenever using numbers in your dissertation .

In most styles, the title page is used purely to provide information and doesn’t include any images. Ask your supervisor if you are allowed to include an image on the title page before doing so. If you do decide to include one, make sure to check whether you need permission from the creator of the image.

Include a note directly beneath the image acknowledging where it comes from, beginning with the word “ Note .” (italicized and followed by a period). Include a citation and copyright attribution . Don’t title, number, or label the image as a figure , since it doesn’t appear in your main text.

Definitional terms often fall into the category of common knowledge , meaning that they don’t necessarily have to be cited. This guidance can apply to your thesis or dissertation glossary as well.

However, if you’d prefer to cite your sources , you can follow guidance for citing dictionary entries in MLA or APA style for your glossary.

A glossary is a collection of words pertaining to a specific topic. In your thesis or dissertation, it’s a list of all terms you used that may not immediately be obvious to your reader. In contrast, an index is a list of the contents of your work organized by page number.

The title page of your thesis or dissertation goes first, before all other content or lists that you may choose to include.

The title page of your thesis or dissertation should include your name, department, institution, degree program, and submission date.

Glossaries are not mandatory, but if you use a lot of technical or field-specific terms, it may improve readability to add one to your thesis or dissertation. Your educational institution may also require them, so be sure to check their specific guidelines.

A glossary or “glossary of terms” is a collection of words pertaining to a specific topic. In your thesis or dissertation, it’s a list of all terms you used that may not immediately be obvious to your reader. Your glossary only needs to include terms that your reader may not be familiar with, and is intended to enhance their understanding of your work.

A glossary is a collection of words pertaining to a specific topic. In your thesis or dissertation, it’s a list of all terms you used that may not immediately be obvious to your reader. In contrast, dictionaries are more general collections of words.

An abbreviation is a shortened version of an existing word, such as Dr. for Doctor. In contrast, an acronym uses the first letter of each word to create a wholly new word, such as UNESCO (an acronym for the United Nations Educational, Scientific and Cultural Organization).

As a rule of thumb, write the explanation in full the first time you use an acronym or abbreviation. You can then proceed with the shortened version. However, if the abbreviation is very common (like PC, USA, or DNA), then you can use the abbreviated version from the get-go.

Be sure to add each abbreviation in your list of abbreviations !

If you only used a few abbreviations in your thesis or dissertation , you don’t necessarily need to include a list of abbreviations .

If your abbreviations are numerous, or if you think they won’t be known to your audience, it’s never a bad idea to add one. They can also improve readability, minimizing confusion about abbreviations unfamiliar to your reader.

A list of abbreviations is a list of all the abbreviations that you used in your thesis or dissertation. It should appear at the beginning of your document, with items in alphabetical order, just after your table of contents .

Your list of tables and figures should go directly after your table of contents in your thesis or dissertation.

Lists of figures and tables are often not required, and aren’t particularly common. They specifically aren’t required for APA-Style, though you should be careful to follow their other guidelines for figures and tables .

If you have many figures and tables in your thesis or dissertation, include one may help you stay organized. Your educational institution may require them, so be sure to check their guidelines.

A list of figures and tables compiles all of the figures and tables that you used in your thesis or dissertation and displays them with the page number where they can be found.

The table of contents in a thesis or dissertation always goes between your abstract and your introduction .

You may acknowledge God in your dissertation acknowledgements , but be sure to follow academic convention by also thanking the members of academia, as well as family, colleagues, and friends who helped you.

A literature review is a survey of credible sources on a topic, often used in dissertations , theses, and research papers . Literature reviews give an overview of knowledge on a subject, helping you identify relevant theories and methods, as well as gaps in existing research. Literature reviews are set up similarly to other  academic texts , with an introduction , a main body, and a conclusion .

An  annotated bibliography is a list of  source references that has a short description (called an annotation ) for each of the sources. It is often assigned as part of the research process for a  paper .  

In a thesis or dissertation, the discussion is an in-depth exploration of the results, going into detail about the meaning of your findings and citing relevant sources to put them in context.

The conclusion is more shorter and more general: it concisely answers your main research question and makes recommendations based on your overall findings.

In the discussion , you explore the meaning and relevance of your research results , explaining how they fit with existing research and theory. Discuss:

  • Your  interpretations : what do the results tell us?
  • The  implications : why do the results matter?
  • The  limitation s : what can’t the results tell us?

The results chapter or section simply and objectively reports what you found, without speculating on why you found these results. The discussion interprets the meaning of the results, puts them in context, and explains why they matter.

In qualitative research , results and discussion are sometimes combined. But in quantitative research , it’s considered important to separate the objective results from your interpretation of them.

Results are usually written in the past tense , because they are describing the outcome of completed actions.

The results chapter of a thesis or dissertation presents your research results concisely and objectively.

In quantitative research , for each question or hypothesis , state:

  • The type of analysis used
  • Relevant results in the form of descriptive and inferential statistics
  • Whether or not the alternative hypothesis was supported

In qualitative research , for each question or theme, describe:

  • Recurring patterns
  • Significant or representative individual responses
  • Relevant quotations from the data

Don’t interpret or speculate in the results chapter.

To automatically insert a table of contents in Microsoft Word, follow these steps:

  • Apply heading styles throughout the document.
  • In the references section in the ribbon, locate the Table of Contents group.
  • Click the arrow next to the Table of Contents icon and select Custom Table of Contents.
  • Select which levels of headings you would like to include in the table of contents.

Make sure to update your table of contents if you move text or change headings. To update, simply right click and select Update Field.

All level 1 and 2 headings should be included in your table of contents . That means the titles of your chapters and the main sections within them.

The contents should also include all appendices and the lists of tables and figures, if applicable, as well as your reference list .

Do not include the acknowledgements or abstract in the table of contents.

An abstract for a thesis or dissertation is usually around 200–300 words. There’s often a strict word limit, so make sure to check your university’s requirements.

In a thesis or dissertation, the acknowledgements should usually be no longer than one page. There is no minimum length.

The acknowledgements are generally included at the very beginning of your thesis , directly after the title page and before the abstract .

Yes, it’s important to thank your supervisor(s) in the acknowledgements section of your thesis or dissertation .

Even if you feel your supervisor did not contribute greatly to the final product, you must acknowledge them, if only for a very brief thank you. If you do not include your supervisor, it may be seen as a snub.

In the acknowledgements of your thesis or dissertation, you should first thank those who helped you academically or professionally, such as your supervisor, funders, and other academics.

Then you can include personal thanks to friends, family members, or anyone else who supported you during the process.

Ask our team

Want to contact us directly? No problem.  We  are always here for you.

Support team - Nina

Our team helps students graduate by offering:

  • A world-class citation generator
  • Plagiarism Checker software powered by Turnitin
  • Innovative Citation Checker software
  • Professional proofreading services
  • Over 300 helpful articles about academic writing, citing sources, plagiarism, and more

Scribbr specializes in editing study-related documents . We proofread:

  • PhD dissertations
  • Research proposals
  • Personal statements
  • Admission essays
  • Motivation letters
  • Reflection papers
  • Journal articles
  • Capstone projects

Scribbr’s Plagiarism Checker is powered by elements of Turnitin’s Similarity Checker , namely the plagiarism detection software and the Internet Archive and Premium Scholarly Publications content databases .

The add-on AI detector is also powered by Turnitin software and includes the Turnitin AI Writing Report.

Note that Scribbr’s free AI Detector is not powered by Turnitin, but instead by Scribbr’s proprietary software.

The Scribbr Citation Generator is developed using the open-source Citation Style Language (CSL) project and Frank Bennett’s citeproc-js . It’s the same technology used by dozens of other popular citation tools, including Mendeley and Zotero.

You can find all the citation styles and locales used in the Scribbr Citation Generator in our publicly accessible repository on Github .

When shall I pay for the service taken up for the draft writing?

Do my essay with us and meet all your requirements..

We give maximum priority to customer satisfaction and thus, we are completely dedicated to catering to your requirements related to the essay. The given topic can be effectively unfolded by our experts but at the same time, you may have some exclusive things to be included in your writing too. Keeping that in mind, we take both your ideas and our data together to make a brilliant draft for you, which is sure to get you good grades.

thesis chapter abstract

receive 15% off

IMAGES

  1. Master Thesis Thesis Abstract Sample

    thesis chapter abstract

  2. Thesis Chapter 1 Introduction

    thesis chapter abstract

  3. Master Thesis Thesis Abstract Sample

    thesis chapter abstract

  4. Research Thesis Abstract Sample

    thesis chapter abstract

  5. Phd thesis abstract writing sample

    thesis chapter abstract

  6. Master Thesis Thesis Abstract Sample

    thesis chapter abstract

VIDEO

  1. The Thesis

  2. Abstract

  3. How to Write an Abstract for Your Thesis Explained in Somali Language

  4. How To Write An Abstract

  5. Thesis chapter Methodology writeup

  6. Video Presentation of THESIS CHAPTER 1 to CHAPTER 5

COMMENTS

  1. How to Write an Abstract

    An abstract is a short summary of a longer work (such as a thesis , dissertation or research paper ). The abstract concisely reports the aims and outcomes of your research, so that readers know exactly what your paper is about.

  2. How to Write an Abstract for a Dissertation or Thesis

    If you're a PhD student, having written your 100,000-word thesis, the abstract will be the 300 word summary included at the start of the thesis that succinctly explains the motivation for your study (i.e. why this research was needed), the main work you did (i.e. the focus of each chapter), what you found (the results) and concluding with how yo...

  3. How To Write A Dissertation Abstract (With Examples)

    Simply put, the abstract in a dissertation or thesis is a short (but well structured) summary that outlines the most important points of your research (i.e. the key takeaways). The abstract is usually 1 paragraph or about 300-500 words long (about one page), but but this can vary between universities.

  4. Dissertation Structure & Layout 101 (+ Examples)

    Abstract (or executive summary) Table of contents, list of figures and tables The core chapters (the "meat" of the dissertation) Chapter 1: Introduction Chapter 2: Literature review Chapter 3: Methodology Chapter 4: Results Chapter 5: Discussion Chapter 6: Conclusion Reference list Appendix

  5. PDF A Complete Dissertation

    Objectives Chapter 1 Objectives Provide a cursory glance at the constitution of an entire dissertation. Offer a comprehensive outline of all key elements for each section of the dissertation—that is, precursor of what is to come, with each element being more fully developed and explained further along in the book.

  6. Dissertation & Thesis Outline

    Abstract "Elevator pitch" of your work (often written last). Introduction Introduce your area of study, sharing details about your research question, problem statement, and hypotheses. Situate your research within an existing paradigm or conceptual or theoretical framework. Literature Review Subdivide as you see fit into main topics and sub-topics.

  7. Writing an Abstract for Your Research Paper

    An abstract is a short summary of your (published or unpublished) research paper, usually about a paragraph (c. 6-7 sentences, 150-250 words) long. A well-written abstract serves multiple purposes: an abstract lets readers get the gist or essence of your paper or article quickly, in order to decide whether to read the full paper;

  8. How To Write The Abstract For Your Dissertation Or Thesis ...

    Learn the basics of how to write an A-grade abstract (or executive summary) for your dissertation, thesis or research project. We explain what a thesis abstr...

  9. What Is a Thesis?

    What Is a Thesis? | Ultimate Guide & Examples Published on September 14, 2022 by Tegan George . Revised on November 21, 2023. A thesis is a type of research paper based on your original research. It is usually submitted as the final step of a master's program or a capstone to a bachelor's degree. Writing a thesis can be a daunting experience.

  10. How to Write a Dissertation

    Abstract. The abstract is a short summary of your dissertation, usually about 150-300 words long. You should write it at the very end, when you've completed the rest of the dissertation. In the abstract, make sure to: State the main topic and aims of your research; Describe the methods you used; Summarise the main results; State your conclusions

  11. Abstracts

    An abstract of a social science or scientific work may contain the scope, purpose, results, and contents of the work. An abstract of a humanities work may contain the thesis, background, and conclusion of the larger work. An abstract is not a review, nor does it evaluate the work being abstracted.

  12. Writing an abstract

    Your abstract should be able to stand alone without someone needing to read your paper to understand it. Try to have only 1-3 sentences for each section. Use relevant key words in your abstract that might lead search engines to your paper. Abstracts usually don't need to have references cited within the text (though there are some exceptions)

  13. How To Write A Dissertation Introduction Chapter

    Overview: How To Write An Introduction Chapter. Understand the purpose and function of the intro chapter. Craft an enticing and engaging opening section. Provide a background and context to the study. Clearly define the research problem. State your research aims, objectives and questions. Explain the significance of your study.

  14. How To Write an Abstract in 7 Steps (With an Example)

    Here are the basic steps to follow when writing an abstract: 1. Write your paper. Since the abstract is a summary of a research paper, the first step is to write your paper. Even if you know what you will be including in your paper, it's always best to save your abstract for the end so you can accurately summarize the findings you describe in ...

  15. PDF APA Style Dissertation Guidelines: Formatting Your Dissertation

    Dissertation Content When the content of the dissertation starts, the page numbering should restart at page one using Arabic numbering (i.e., 1, 2, 3, etc.) and continue throughout the dissertation until the end. The Arabic page number should be aligned to the upper right margin of the page with a running head aligned to the upper left margin.

  16. Order and Components

    Abstracts cannot exceed 150 words for a thesis or 350 words for a dissertation. Number the abstract page with the lower case Roman numeral iii (and iv, if more than one page) centered with a 1/2″ margin from the bottom edge. ... Figure 2, etc.), or you may assign a two-part Arabic numeral with the first number designating the chapter in which ...

  17. Dissertation & Thesis Outline

    Your abstract; Your chapters (sometimes subdivided into further topics like literature review, research methods, avenues for future research, etc.) ... This is a short paragraph at the end of your introduction to inform readers about the organisational structure of your thesis or dissertation. This chapter outline is also known as a reading ...

  18. Does my Dissertation Need an Abstract?

    The abstract is written when all the other elements of your dissertation or thesis are completed, and you know the story of your research. The abstract is a concise yet informative summary of your research. In this chapter, we explore the purpose of the abstract, its...

  19. Know How to Structure Your PhD Thesis

    Abstract: The abstract is a brief summary that quickly outlines your research, touches on each of the main sections of your thesis, and clearly outlines your contribution to the field by way of your PhD thesis. Even though the abstract is very short, similar to what you've seen in published research articles, its impact shouldn't be ...

  20. Structuring your thesis

    An abstract is a summary of your entire thesis and should provide a complete overview of the thesis, including your key results and findings. ... introductory chapter with detailed literature reviews relevant to the topic of each chapter provided separately in each chapter — this is common in a thesis comprised of publications.

  21. Where does the abstract go in a thesis or dissertation?

    Where does the abstract go in a thesis or dissertation? The abstract appears on its own page in the thesis or dissertation, after the title page and acknowledgements but before the table of contents. Frequently asked questions: Dissertation How long is a dissertation? What is a dissertation prospectus? Who typically writes a thesis?

  22. PDF THESIS OR PROJECT FORMATTING GUIDELINES FROM THE ...

    main section headings and chapter titles. Examples of these include: Abstract, List of Tables or Figures, Chapter 1, 2, 3, Etc. Heading 2 is for the first level of subheadings. In this example document, the bolded line Table of Contents in this chapter, chapter 5, is an example of the first subheading and assigned heading 2 from the styles section.

  23. How to add abstract for selected chapters in my thesis

    2. Going through the internet, it seems evident that each latex file has its own document class (\documentclass) in latex. In the template, I was using I should have to access a folder called "Classes" and follow "CUEDthesisPSnPDF". In the file "CUEDthesisPSnPDF" I have searched for abstract under this I have written the following environment.

  24. Abstract Thesis Chapter

    Abstract Thesis Chapter - Alexander Freeman #8 in Global Rating 100% Success rate 4.8/5. Nursing Management Business and Economics Education +117. 4423 Orders prepared. Custom Essay Writing Service Professionals write your essay - timely, polished, unique. Standard essay helper ...